Thread #10114

traction control?

9 archived posts · 721 historical views

CedricMarch 24, 2008
#141344

traction control?

Hey it seems like my car has traction control, its a Y33 Cedric how do I disable the traction control? I assumed itd probably be a fuse like on 350z's but the fuse boxes are all in japanese and i cant read japanese haha
View original BBCode
Hey it seems like my car has traction control, its a Y33 Cedric how do I disable the traction control?  I assumed itd probably be a fuse like on 350z's but the fuse boxes are all in japanese and i cant read japanese haha
Yokotas13March 24, 2008
#141372
you dont have traction control
unless your in the wet, the tranny just kinda, dies off if you start spining tires

do some mods to the engine and it will go away


oh BTW, check your crossover pipe in the rear of the engine (if its a turbo model) for cracking around the flange where it bolts to the RHS manifold (from the rear) and the meshy flex pipe part

that will be going bad soon lol
View original BBCode
you dont have traction control
unless your in the wet, the tranny just kinda, dies off if you start spining tires

do some mods to the engine and it will go away


oh BTW, check your crossover pipe in the rear of the engine (if its a turbo model) for cracking around the flange where it bolts to the RHS manifold (from the rear) and the meshy flex pipe part

that will be going bad soon lol
CedricMarch 24, 2008
#141420
haha thanks, I for some reason had a feeling you would be the only one that would be able to help me.


So I have full 3" Jasma exhaust turbo back and an HKS intake and thats it.

So my planned mods soon are going to be front mount/piping, throwing an HKS BOV I have sitting around from my RX7 on there, and a profec B on probably 12lbs? Would that be fine and help with the problem???
View original BBCode
haha thanks, I for some reason had a feeling you would be the only one that would be able to help me.
 
 
So I have full 3" Jasma exhaust turbo back and an HKS intake and thats it.  
 
So my planned mods soon are going to be front mount/piping, throwing an HKS BOV I have sitting around from my RX7 on there, and a profec B on probably 12lbs?  Would that be fine and help with the problem???
CedricMarch 24, 2008
#141421
Oooo and yes, its a turbo model... but the cross over pipe is that where the exhaust comes together to go into one exhaust pipe out the back??
View original BBCode
Oooo and yes, its a turbo model... but the cross over pipe is that where the exhaust comes together to go into one exhaust pipe out the back??
Yokotas13March 25, 2008
#141538
if you look behind the engine there is a shield under it is a pipe

its liek a J kinda
bolts to the RHS manifold to the LHS so it can be single turbo and not twin.

it cracks allllll the time
and itsl iek 130.00
and you gotta drop the tranny to replace it.
not fun at all.
i did it already



get yourself an RB turbo upgrade
RB dump pipe
i can get you a kakimoto downpipe that is for the Y33
SAFC2
(you have an RB25 MAF btw)
wideband
and your at 300HP

I am:)
View original BBCode
if you look behind the engine there is a shield under it is a pipe
 
its liek a J kinda
bolts to the RHS manifold to the LHS so it can be single turbo and not twin.
 
it cracks allllll the time
and itsl iek 130.00
and you gotta drop the tranny to replace it.
not fun at all.
i did it already
 
 
 
get yourself an RB turbo upgrade
RB dump pipe
i can get you a kakimoto downpipe that is for the Y33
SAFC2
(you have an RB25 MAF btw)
wideband
and your at 300HP
 
I am:)
CedricMarch 25, 2008
#141598
Hmmm that does not sounds like fun haha. But RB turboes suck! Rb26 are ok but RB20 and 25 are ceramic? On one of my old RB cars (rb20, with the crappiest turbo of course haha) but the turbo shattered, like most of them do. Maybe I'll go with a GT28 or something along those lines.

thanks for the help!
View original BBCode
Hmmm that does not sounds like fun haha.  But RB turboes suck!  Rb26 are ok but RB20 and 25 are ceramic?  On one of my old RB cars (rb20, with the crappiest turbo of course haha) but the turbo shattered, like most of them do.  Maybe I'll go with a GT28 or something along those lines.
 
thanks for the help!
Yokotas13March 25, 2008
#141602
that will work too
i have an RB25 neo (not that it makes a difference) on my car
14psi and not a problemq
View original BBCode
that will work too
i have an RB25 neo (not that it makes a difference) on my car
14psi and not a problemq
CedricMarch 25, 2008
#141645
hmmm sounds good. I'm not exactly sure what I want to do yet with the car and or motor. I've always had fast cars, mostly alot of RB swapped 240's and so driving this boat I feel slow haha. I was een considering an internaly gated GT30R on it I dunno we shall see.
View original BBCode
hmmm sounds good.  I'm not exactly sure what I want to do yet with the car and or motor.  I've always had fast cars, mostly alot of RB swapped 240's and so driving this boat I feel slow haha.  I was een considering an internaly gated GT30R on it I dunno we shall see.
CedricMarch 25, 2008
#141693
O yea also it looks like you've been through alot of rims.. whats the best width and offset for 18"s? I want to take my back rims and put them in the front and get some better offset wheels for the back. Thanks!
View original BBCode
O yea also it looks like you've been through alot of rims.. whats the best width and offset for 18"s?  I want to take my back rims and put them in the front and get some better offset wheels for the back.  Thanks!