FS: 97 Lexus LS400 calipers (Approved by DriftGirl)
Hi All,
I have a set of used front & rear calipers with OEM pads from a 97 Lexus LS400. These were intended for one of my upgrade mods but came to find out that they don't fit on my 1st Gen. Therefore, I would like to put these up for sale in the amount of $275. Here are some pictures:
http://i7.photobucket.com/albums/y278/danny8ng/Lexus%20GS300/DSC00890.jpg
http://i7.photobucket.com/albums/y278/danny8ng/Lexus%20GS300/DSC00892.jpg
I'm in San Diego area, you can either PM me or contact me at (619) 817-5840. I would prefer to have these items picked up, or I can meet with the buyer within San Diego area. Thanks for looking !
Danny
View original BBCode
Hi All,
I have a set of used front & rear calipers with OEM pads from a 97 Lexus LS400. These were intended for one of my upgrade mods but came to find out that they don't fit on my 1st Gen. Therefore, I would like to put these up for sale in the amount of $275. Here are some pictures:
[URL]http://i7.photobucket.com/albums/y278/danny8ng/Lexus%20GS300/DSC00890.jpg[/URL]
[URL]http://i7.photobucket.com/albums/y278/danny8ng/Lexus%20GS300/DSC00892.jpg[/URL]
I'm in San Diego area, you can either PM me or contact me at (619) 817-5840. I would prefer to have these items picked up, or I can meet with the buyer within San Diego area. Thanks for looking !
Danny
Nice upgrade for SC owners as well!
And much cheaper than a supra setup:biggthumpup:
Good luck!!
View original BBCode
Nice upgrade for SC owners as well!
And much cheaper than a supra setup:biggthumpup:
Good luck!!
Thanks for the free bump, Emerald !
My fellow friends -- throw me some reasonable offers, so I can end this sale thread.
Thanks,
Danny
View original BBCode
Thanks for the free bump, Emerald !
My fellow friends -- throw me some reasonable offers, so I can end this sale thread.
Thanks,
Danny
Temptation are you sure those wont fit? I'm pretty sure the 2LS calipers are a direct bolt on for the 1LS. You just may have to cut the dust shield a little bit. Also make sure you have the 2LS rotors.
View original BBCode
Temptation are you sure those wont fit? I'm pretty sure the 2LS calipers are a direct bolt on for the 1LS. You just may have to cut the dust shield a little bit. Also make sure you have the 2LS rotors.
Probably need to shave the LCA bolts or use a some RCA's to clear.
Supras are direct bolt on for first gen sc, gs, ls, as well as second gen gs.
BUT for the GS for sure, you need the RCA's to move the knuckle up to clear so the caliper won't hit.
View original BBCode
Probably need to shave the LCA bolts or use a some RCA's to clear.
Supras are direct bolt on for first gen sc, gs, ls, as well as second gen gs.
BUT for the GS for sure, you need the RCA's to move the knuckle up to clear so the caliper won't hit.
NJ240xsMan - I bought these LS calipers intended to replace my 1st Gen GS300 calipers, and they are not direct bolt on. As Caoboy has mentioned, either to shave the bolt and/or the caliper a little bit in order to get these to fit on the GS. The other alternative is to purchase some RCA. However, I can't seem to find any local vendor other than RDHJapan that sell the RCA for 1st Gen GS300.
So any SC owners who would like to upgrade their calipers, these LS400 ones would be the one ( or the Supra calipers as another option.) I'm willing to accept any reasonable offers as long as you're buying the whole set.
Thanks!
Danny
View original BBCode
NJ240xsMan - I bought these LS calipers intended to replace my 1st Gen GS300 calipers, and they are not direct bolt on. As Caoboy has mentioned, either to shave the bolt and/or the caliper a little bit in order to get these to fit on the GS. The other alternative is to purchase some RCA. However, I can't seem to find any local vendor other than RDHJapan that sell the RCA for 1st Gen GS300.
So any SC owners who would like to upgrade their calipers, these LS400 ones would be the one ( or the Supra calipers as another option.) I'm willing to accept any reasonable offers as long as you're buying the whole set.
Thanks!
Danny
Let's try this again, I've lowered the price for a quick sale.
Have a great weekend !!
View original BBCode
Let's try this again, I've lowered the price for a quick sale.
Have a great weekend !!
View original BBCode
[url]http://clublexus.com/forums/showthread.php?t=126144&highlight=ls400+brakes[/url]
cellyboy -- sorry, it would be too much of a hassle to ship out of the US. I would prefer to deal with the locals, or within the US. Thanks for your interest !!
View original BBCode
cellyboy -- sorry, it would be too much of a hassle to ship out of the US. I would prefer to deal with the locals, or within the US. Thanks for your interest !!
Items sold -- moderators, please lock this thread. Thanks !
View original BBCode
Items sold -- moderators, please lock this thread. Thanks !