UCF20 FITMENT ADJUSTMENT?

Hi guys, been like a year since ive been active on this forum lol got busy.. so yeah straight to the story.. I just went through a set of maya rt5 which is just riverside trafficstars rts in 20x9 and 20x10.5 +30 +29 with 245 35 20 toyo t1r 285 35 20 toyo t1r which i just sold recently and picked up a new set of wheels. WEDS Cerberus II in 19x9 and 19x10 +12 +9 with 235 35 19 and 245 35 19 dunlop lemans tires. The wheels are getting redone as we type away on this board. My question is if i should roll my rear fenders some more and roll my front fenders to fit them. I am on wald coilovers so I can pretty much lower the car to low aggressive stance so it will camber in and flush out the fronts. When I had the 20's, the fronts would open rub the inner fenders in the front when harder than usual braking, fast turns, and uneven pavements, etc. My guess was to roll the front fenders and roll the rear fenders that are cut already. My rear can probably get pulled maybe 1/2" as well.. Tell me what your opinions are guys.

try it on and see but u will have to roll at least the front  and pull rear  regardless. the rear might clear as is. that is if you cut enough off allready