Fender Clearance NEED HELP

Hey guys, I just picked up some 20x9 et 30 for the front.  The problem I had when I was lowered to the max was that I couldn't turn.  The tires would just eat the fender.  So I raised it up a bit till I get 225/35/20 nankangs to replace my 245/35/20 555's.  Now I questions is since my front seem to be slightly sunken in, if I put 15mm up front with the nankangs and drop my car so that the fender covers half the side wall...will I eat fender?  Please help me out. THanks!

Oh I drive a 2GS Thanks

You need 30 series.

[QUOTE=nizzan4u2nv;147013]You need 30 series.[/QUOTE]

x2...you can also roll your fenders to keep them from rubbing.

You dont need a 30 series.  Just get the fronts rolled and you will be fine

My front left is rolled and got messed up and then the right side is shaved and I'm rubbing when i turn and going on uneven surfaces such as a slight dip with my car raised up 1/2 inch running the 245's.  Right now my height in front is just sitting above the tire

I'm in the same boat.  Running a 20x8.5 up front with a +29 offset and a 225/35 series tire.

I'm gonna have the body shop roll the fenders, but I don't know if that will be enough?  It looks like I'm gonna have to pull the fender as well.

Anyone have any suggestions or pictures of a modified fender to help clear an aggressive offset?  

Any help would be greatly appreciated, as all my friends are telling me it can't be done and I would like to prove them wrong. =)

I have a 2gs with +15 mil wider fenders with a 19x8.5 with a 38 offset and a 225/35/19 and I can do U turns bagged slowly of course ... so wider fender will extremely help

fenders are overrated

fenders are great

Yo Travis get a 10mm spacer and you should be fine or just find some jdm aristo fenders or some negative camber

Sup Ray...Yeah I got the 225/35 Nankangs on the way and I'm gonna try the 15mm kics that I already have.  Add some camber and hopefully I'll be ok.  I tried looking for some aristo fenders, but did find any searching ebay and what not.

Someone should chim in ... on who for him to contact .. Starts with a Y_ _ _ _ _ _ _ _ ends in a (3)  lol