View original BBCode
Ok so i bought this pair of premade LED clusters i found on ebay through another forum. I had them for a while now but i ran them direct to the 12V wires and they started flickering within a few days. So now i added some resistors and they seem to be working fine. I also made a new lense using plexiglass and a dremel since the OE one is fluted and thick as hell. I also used some scrap metal and jb weld i had layin around and made some holders so they will be about .75'' from the lense. anyways heres pics...
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2393.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2396.jpg[/IMG]
Ill take nite shots later on today when it gets darker
On a side note im also working on a LED third brake lamp but im still in the process. It will use 10 4-chip red LEDs and im thinking of putting a clear lense.
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2403.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2400.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2399.jpg[/IMG]
Nice... Can't wait for the final product. BTW, do post up some howto wilya?
Cheers!
View original BBCode
Nice... Can't wait for the final product. BTW, do post up some howto wilya?
Cheers!
Yea ill try to document my progress on this one project. I got a few going on at once. :)
I was starting to do a howto for this one but couldnt find the charger for my digi cam.
dusk shots
View original BBCode
Yea ill try to document my progress on this one project. I got a few going on at once. :)
I was starting to do a howto for this one but couldnt find the charger for my digi cam.
dusk shots
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2420.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2421.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v286/ViruzOne/DSCF2423.jpg[/IMG]
damn ... feels like morning staring at the rear of the car ... Very Bright lights !
View original BBCode
damn ... feels like morning staring at the rear of the car ... Very Bright lights !
I bought the same lights you did for the license plate lights but I haven't tried anything with them yet. Where did you get the resistors?
View original BBCode
I bought the same lights you did for the license plate lights but I haven't tried anything with them yet. Where did you get the resistors?
that's bright bro. please do a write-up.
View original BBCode
that's bright bro. please do a write-up.
Very nice, I plan to do my third brake light one of these days
View original BBCode
Very nice, I plan to do my third brake light one of these days
widebody_Q;160987 wrote:Very nice, I plan to do my third brake light one of these days
wrd +1
View original BBCode
[QUOTE=widebody_Q;160987]Very nice, I plan to do my third brake light one of these days[/QUOTE]
wrd +1
chrispy;160835 wrote:I bought the same lights you did for the license plate lights but I haven't tried anything with them yet. Where did you get the resistors?
I used two 50 ohm 1/4 watt resistors in series soldered to the positive wire. then just plug n play.
View original BBCode
[quote=chrispy;160835]I bought the same lights you did for the license plate lights but I haven't tried anything with them yet. Where did you get the resistors?[/quote]
I used two 50 ohm 1/4 watt resistors in series soldered to the positive wire. then just plug n play.
damn i want that LED plate light
View original BBCode
damn i want that LED plate light
You can get plug in license plate bulbs, about the same brightness with no modifications from leddomelight.com along with some super bright dome light panels - already pre soldered & plug in install, couldnt be easier. Have them in my FJ Cruiser.
View original BBCode
You can get plug in license plate bulbs, about the same brightness with no modifications from leddomelight.com along with some super bright dome light panels - already pre soldered & plug in install, couldnt be easier. Have them in my FJ Cruiser.
