FS: Fabulous Profounds 19"
It's time to get new wheels, so I'm selling my Fabulous Profounds. I bought them a couple of months ago with the silver face. But did not like the silver, so I had the whole wheels polished.
Specs: Front
19x9 +24 with 225/35/19 Nangkan
Specs: Rear
19x10 +10 with 245/35/19 Nangkan
The wheels are in great condition, with NO curb rash or any big scratches. But, im missing 1 valvestem cap. the tires are pretty much new. Less than 5,000 miles. Im asking $3000 shipped.
here's the wheels on the car

View original BBCode
It's time to get new wheels, so I'm selling my Fabulous Profounds. I bought them a couple of months ago with the silver face. But did not like the silver, so I had the whole wheels polished.
Specs: Front
19x9 +24 with 225/35/19 Nangkan
Specs: Rear
19x10 +10 with 245/35/19 Nangkan
The wheels are in great condition, with NO curb rash or any big scratches. But, im missing 1 valvestem cap. the tires are pretty much new. Less than 5,000 miles. Im asking $3000 shipped.
[IMG]http://i88.photobucket.com/albums/k196/wickedFDee/rim2.jpg[/IMG]
[IMG]http://i88.photobucket.com/albums/k196/wickedFDee/rim3.jpg[/IMG]
[IMG]http://i88.photobucket.com/albums/k196/wickedFDee/IMG_0504.jpg[/IMG]
here's the wheels on the car
[IMG]http://i88.photobucket.com/albums/k196/wickedFDee/dk001.jpg[/IMG]
Great wheels wish I could of fit those
View original BBCode
Great wheels wish I could of fit those
nice wheels. where are the wheels located, and how much picked up?
View original BBCode
nice wheels. where are the wheels located, and how much picked up?
shit already dawg??! i wonder what wheels you gettin next? prolly some ballin shit huh haha
View original BBCode
shit already dawg??! i wonder what wheels you gettin next? prolly some ballin shit huh haha
damn. If only they fit the benz lol. you aint even had a wear on the tires. good luck with the sale. I can vouch these are in excellent condition
View original BBCode
damn. If only they fit the benz lol. you aint even had a wear on the tires. good luck with the sale. I can vouch these are in excellent condition
seen these in person and they are 100% LEGIT!
View original BBCode
seen these in person and they are 100% LEGIT!
whats the price for pick up....?
View original BBCode
whats the price for pick up....?
KickEachVerse;170081 wrote:Selling them already?
Yeah, Freddie convince me to get a different set. hahaha
nismornr;170097 wrote:nice wheels. where are the wheels located, and how much picked up?
check your pm
DaygoVIP619;170100 wrote:shit already dawg??! i wonder what wheels you gettin next? prolly some ballin shit huh haha
It's a secret. lol
C4 President;170112 wrote:damn. If only they fit the benz lol. you aint even had a wear on the tires. good luck with the sale. I can vouch these are in excellent condition
I know, the damn tires are brand new. Thanks bro!
View original BBCode
[QUOTE=KickEachVerse;170081]Selling them already?[/QUOTE]
Yeah, Freddie convince me to get a different set. hahaha
[QUOTE=nismornr;170097]nice wheels. where are the wheels located, and how much picked up?[/QUOTE]
check your pm
[QUOTE=DaygoVIP619;170100]shit already dawg??! i wonder what wheels you gettin next? prolly some ballin shit huh haha[/QUOTE]
It's a secret. lol
[QUOTE=C4 President;170112]damn. If only they fit the benz lol. you aint even had a wear on the tires. good luck with the sale. I can vouch these are in excellent condition[/QUOTE]
I know, the damn tires are brand new. Thanks bro!
TristateViP;170062 wrote:Great wheels wish I could of fit those
it will fit....perfectly bro.
View original BBCode
[quote=TristateViP;170062]Great wheels wish I could of fit those[/quote]it will fit....perfectly bro.
//935GS400;170420 wrote:it will fit....perfectly bro.
Witha a 10mm offset they will rub pretty bad on a 2gs without custom camber arms or slight fender pull. If you can have the machine shop take 4-6mm off the rear disk you will have such an amazing stance with these wheels on a 2gs.
View original BBCode
[QUOTE=//935GS400;170420]it will fit....perfectly bro.[/QUOTE]
Witha a 10mm offset they will rub pretty bad on a 2gs without custom camber arms or slight fender pull. If you can have the machine shop take 4-6mm off the rear disk you will have such an amazing stance with these wheels on a 2gs.
yeah w/ air suspension it would be easier for it to fit.
View original BBCode
yeah w/ air suspension it would be easier for it to fit.
^^^^i dont think so. all you need to do is have a tire stretch and cut the fender tab pretty much all the way and you dont have to shave the disk and use the stock camber it gives you after you drop it. if any pull maybe like 1-2mm. when i had my GS i had DH with low disk and it cleared fine. it was a +20 then i added a 5mm spacer and i could still go another 5mm if i had cut the fender instead of rolling it flat
View original BBCode
^^^^i dont think so. all you need to do is have a tire stretch and cut the fender tab pretty much all the way and you dont have to shave the disk and use the stock camber it gives you after you drop it. if any pull maybe like 1-2mm. when i had my GS i had DH with low disk and it cleared fine. it was a +20 then i added a 5mm spacer and i could still go another 5mm if i had cut the fender instead of rolling it flat
On my friends GS we maxed the factory camber on a 19x10 et8 and with his air his lip hit the fender if dropped all down. And I had also shaved the rear fenders completely smooth. Without a pull or aftermarket camber on a et8 his lip and tire rubbed the fender real bad. But every car is different. He had way more camber than my GS did maxed out.
View original BBCode
On my friends GS we maxed the factory camber on a 19x10 et8 and with his air his lip hit the fender if dropped all down. And I had also shaved the rear fenders completely smooth. Without a pull or aftermarket camber on a et8 his lip and tire rubbed the fender real bad. But every car is different. He had way more camber than my GS did maxed out.
^^^yeah, thats what i was thinkin. mine was a 99. for some reason i notice that different GS's has different problems, well just for the rear. but my friend has 19x10 +10 on his 1st gen he just cut the fender tab and its straight.
View original BBCode
^^^yeah, thats what i was thinkin. mine was a 99. for some reason i notice that different GS's has different problems, well just for the rear. but my friend has 19x10 +10 on his 1st gen he just cut the fender tab and its straight.
platnumnutz276;170447 wrote:where are you located?
San Diego
View original BBCode
[QUOTE=platnumnutz276;170447]where are you located?[/QUOTE]
San Diego
antbo is right this is a easy fit because it has been done before =)

View original BBCode
antbo is right this is a easy fit because it has been done before =)
[img]http://us.st12.yimg.com/us.st.yimg.com/I/yhst-34767620486819_2009_9054751[/img]
elpresidente;170551 wrote:are these single PCD?
Sorry El Pres, but WTF is PCD? :shrug:
View original BBCode
[QUOTE=elpresidente;170551]are these single PCD?[/QUOTE]
Sorry El Pres, but WTF is PCD? :shrug:
is it only 5x114.3 or multidrill ?, is what hes asking..
View original BBCode
is it only 5x114.3 or multidrill ?, is what hes asking..
phrosttz0;170620 wrote:is it only 5x114.3 or multidrill ?, is what hes asking..
Gotcha. it's multidrill.
Thanks
View original BBCode
[QUOTE=phrosttz0;170620]is it only 5x114.3 or multidrill ?, is what hes asking..[/QUOTE]
Gotcha. it's multidrill.
Thanks
nice wheels... only if it had a more aggressive offset i would jump on these....
good luck on the sale....
View original BBCode
nice wheels... only if it had a more aggressive offset i would jump on these....
good luck on the sale....
man these are such a temptation, if I did not feel the need to buy new wheels I would cop these, these will fit on my wide body accord and my GS3, what is the disk type? I have a Big Brake Kit on my accord I will be putting on so I need the clearance and i m not putting no spacers on it
View original BBCode
man these are such a temptation, if I did not feel the need to buy new wheels I would cop these, these will fit on my wide body accord and my GS3, what is the disk type? I have a Big Brake Kit on my accord I will be putting on so I need the clearance and i m not putting no spacers on it
platnumnutz276;170966 wrote:man these are such a temptation, if I did not feel the need to buy new wheels I would cop these, these will fit on my wide body accord and my GS3, what is the disk type? I have a Big Brake Kit on my accord I will be putting on so I need the clearance and i m not putting no spacers on it
these aint going to work then. they are low disk
View original BBCode
[QUOTE=platnumnutz276;170966]man these are such a temptation, if I did not feel the need to buy new wheels I would cop these, these will fit on my wide body accord and my GS3, what is the disk type? I have a Big Brake Kit on my accord I will be putting on so I need the clearance and i m not putting no spacers on it[/QUOTE]
these aint going to work then. they are low disk
that makes the decision easier one me lol
View original BBCode
that makes the decision easier one me lol