VIPStyle Tables

Hi all,

I have cruised the non-101 forums quite a bit :) The only tables I have seen that are not RHD were custom made or Garson? I am Extremely!! interested in either getting a real Garson/ JP / Rando table for my car, over my RHD glove box. 

Any of your full members have any feedback on this??? Info?? 

If you want photo samples of what I am looking for let me know :)

What car do you have that is RHD?

I think he just means he wants a LHD table for the right side glove box IE. a garson/ custom table. There are a few members on here who have made them you may want to shoot Zion_97 a PM I know that he has put some nice tables together.

sounds like an xA from his iSt avi. don't think he has an RHD whip, just ist parts in his xA.

to op, it's not going to fit, since the tables curve to the dash and if you get one meant for an RHD car it's not going to look right.

[quote=Caoboy;171397]What car do you have that is RHD?[/quote]

Yeah I can't go back and edit my typo's :pat:. So yeah I want a LHD version or custom made one. Zion_97? ok will do THANK YOU! I PM'd augdogg cause his were HOTTTTTTT!!! but not heard back from him. I will PM Zion_97 for sure!

Yes I own a Scion xA that is called the iSt in Japan. I am doing an overhaul of interior modding to the car this past few weeks and comming weeks. Black leather Vinyl Headliner/Pillers, x2 Garson regualr leather Neck pads, I have the Blakc Fusa and am awaiting the KUROTUNA knot. There are some other mods related to the car that you guys prob. don't care abotu I am doing also like getting a VERY rare "T" badged airbag for the 06 model. Anyhow I need a table to hold my DAD Airfreshners :smiley-rofl:. For real I do!

Here are a few pics of the ones I make...I have not made any tables for any other platform than the Y33 yet. but check it out
 
[IMG]http://i83.photobucket.com/albums/j298/q45t07/table3.jpg[/IMG]
[IMG]http://i83.photobucket.com/albums/j298/q45t07/table4.jpg[/IMG]
[IMG]http://i83.photobucket.com/albums/j298/q45t07/table6.jpg[/IMG]
[IMG]http://i83.photobucket.com/albums/j298/q45t07/pt6-1.jpg[/IMG]

that thing is nice.

Auggdogg made them for his GS, but he's 'backordered' right now.

[COLOR=White][B]zion_97 [/B][/COLOR]those a great! Very close to the Rando ones I have seen.

Pictured on my 2nd Gen Gs4
[IMG]http://a341.ac-images.myspacecdn.com/images01/27/l_6ea459e63824f095b8356309c97f91cc.jpg[/IMG]


I love mine , but Augustine is very backed up ... I am very lucky I was one of the last tables that pushed through for the time being .. 

[IMG]http://a766.ac-images.myspacecdn.com/images01/43/l_8672e163587f774878b74aadb9eae41d.jpg[/IMG]

WOW!! Yeah that's more like what I would like. However my passenger side is not that large. If I could emulate that look I would be extremely happy. I think it's all in the curves :)

jp is making lhd tables now. not sure if they have your ap but any of the parts vendors should be able to shed some light on the subject. cool thing about jp is the wide variety of fnishes available. not to take away from audogg or zion but support those who support the site whenever possible. :biggthumpup:

[quote=BLACKonBLACK98;171829]jp is making lhd tables now. not sure if they have your ap but any of the parts vendors should be able to shed some light on the subject. cool thing about jp is the wide variety of fnishes available. not to take away from audogg or zion but support those who support the site whenever possible. :biggthumpup:[/quote]
 
 
dont know if you read that thread about the JP tables but they may or may not fit the USDM LHD cars AND there is no refund if it does not fit to your likeing. YOur basically taking the table and flipping it over. 
.
One of the vendors in the thread will had said that there are subtle differences in the curvature of the dash and may not fit snug...
 
and I will be a vendor again in about another few weeks and have been helping folks out getting parts for a few years now...so no worries with me...I have supported this site for a long time in many different ways:biggthumpup:

made my own out of Rare Hawaiian Koa Wood! with all the Garson Bling to it.. 
 
[IMG]http://img.photobucket.com/albums/v649/eight08customs/2008%20xb/DSC00053.jpg[/IMG]

wow. props man! very nice exotic wood.

[quote=zion_97;171847]dont know if you read that thread about the JP tables but they may or may not fit the USDM LHD cars AND there is no refund if it does not fit to your likeing. YOur basically taking the table and flipping it over. 
.
One of the vendors in the thread will had said that there are subtle differences in the curvature of the dash and may not fit snug...
 
and I will be a vendor again in about another few weeks and have been helping folks out getting parts for a few years now...so no worries with me...I have supported this site for a long time in many different ways:biggthumpup:[/quote]

I know that luxury-bippu-style had made an announcement on this then retracted. Very disappointing. I buy from him all the time. So it is now confirmed they do have them?

PS: Will PM you back. Just have stuff I need to take care of atm.

well i ordered one through a different vendor and sent pics to sean.  my fitment is good.  it took a while to get because they had issues with the fitment at first.  also i wanted mine to be mounted differently so i wouldnt make me move my switch panel which is mounted in the glove box.  i am happy with my jp table. i just ordered the coasters too.

[QUOTE=eight08customs;171852]made my own out of Rare Hawaiian Koa Wood! with all the Garson Bling to it.. 
 
[IMG]http://img.photobucket.com/albums/v649/eight08customs/2008%20xb/DSC00053.jpg[/IMG][/QUOTE]

vents are sick bro

[QUOTE=eight08customs;171852]made my own out of Rare Hawaiian Koa Wood! with all the Garson Bling to it.. 
 
[IMG]http://img.photobucket.com/albums/v649/eight08customs/2008%20xb/DSC00053.jpg[/IMG][/QUOTE]

HAWAIIAN!!  shoulda make that in to a ukulele instead.  haha.  nice table brah!  was thinking of going custom too. think i might just try that JP flipped one instead.  too lazy.

[quote=vip tint+glass;171929]well i ordered one through a different vendor and sent pics to sean.  my fitment is good.  it took a while to get because they had issues with the fitment at first.  also i wanted mine to be mounted differently so i wouldnt make me move my switch panel which is mounted in the glove box.  i am happy with my jp table. i just ordered the coasters too.[/quote]

Got any pics and contacts? :dance:

[quote=beangrower;171932]HAWAIIAN!! shoulda make that in to a ukulele instead. haha. nice table brah! was thinking of going custom too. think i might just try that JP flipped one instead. too lazy.[/quote]
 
 
Thanks guys... 
...just take that JP table apart and use a router and copy it to some exitic wood..

dammmm im interested in this for my gs.... how much would one of these run for a gs400?