Thread #15341

test fitting Ordens

45 archived posts · 5,817 historical views

flexinsteelzJanuary 7, 2009
#218252

test fitting Ordens

here are the ordens i picked up from One Ton VIP not too long ago... finally had a chance to throw them on my ucf21 to see how they look... these wheels arent goin on this car, they Might go onto my ucf10... not too sure if i'll start that project since i have some business plans im saving up for... but anyways, heres something to look at for the mean time...

Forum image

Forum image

Forum image
View original BBCode
here are the ordens i picked up from One Ton VIP not too long ago... finally had a chance to throw them on my ucf21 to see how they look... these wheels arent goin on this car, they Might go onto my ucf10... not too sure if i'll start that project since i have some business plans im saving up for... but anyways, heres something to look at for the mean time...
 
[IMG]http://i43.tinypic.com/ih8s3o.jpg[/IMG]
 
[IMG]http://i41.tinypic.com/30ndi4p.jpg[/IMG]
 
[IMG]http://i44.tinypic.com/2a7swva.jpg[/IMG]
PANCAKES!January 7, 2009
#218254
DAMN! Didn't know they looked that good! :pat:
View original BBCode
DAMN! Didn't know they looked that good! :pat:
VIS250PJanuary 7, 2009
#218270
It look good.. I like it!!
View original BBCode
It look good..  I like it!!
nizzan4u2nvJanuary 7, 2009
#218271
Where you able to fit the fronts with the stock calipers? You should leave them on that car, fenderwells have a lot more space then a ucf10. For the rears youll just need a little more camber and dump it. Its only 13mm more out then mine and its a lot more stretched.
View original BBCode
Where you able to fit the fronts with the stock calipers? You should leave them on that car, fenderwells have a lot more space then a ucf10. For the rears youll just need a little more camber and dump it. Its only 13mm more out then mine and its a lot more stretched.
fatfreeJanuary 7, 2009
#218273
Very nice fit! Looks as if you don't even need to pull the fender, but just roll it flat?
If they aren't going on anything soon, you might as well roll on them with the LS in the meantime.

If you do ride on them with the LS, take some more pictures!!
View original BBCode
Very nice fit!  Looks as if you don't even need to pull the fender, but just roll it flat?
If they aren't going on anything soon, you might as well roll on them with the LS in the meantime.

If you do ride on them with the LS, take some more pictures!!
VipDoutJanuary 7, 2009
#218274
you dont have to do much to fit those ! damn .... they look swallowed up like 18s ?
View original BBCode
you dont have to do much to fit those ! damn .... they look  swallowed up like 18s ?
widebody_QJanuary 7, 2009
#218279
You might need to pull it out like 5-10mm though but either way, the outcome should look great. :biggthumpup:
View original BBCode
You might need to pull it out like 5-10mm though but either way, the outcome should look great.  :biggthumpup:
flexinsteelzJanuary 7, 2009
#218285
nizzan4u2nv;218271 wrote:Where you able to fit the fronts with the stock calipers? You should leave them on that car, fenderwells have a lot more space then a ucf10. For the rears youll just need a little more camber and dump it. Its only 13mm more out then mine and its a lot more stretched.



nah i got to lazy and only did that one wheel.... it wont fit the fronts for sure... i have 15mm in the fronts to clear brake on my current wheels...

haha..yea they do look lik swallowed up 18's because of the wheel gap...

i would roll on these if i still had the bags on the car but its only on coils rite now..
heres a pic of it when it was on bags..

Forum image
View original BBCode
[quote=nizzan4u2nv;218271]Where you able to fit the fronts with the stock calipers? You should leave them on that car, fenderwells have a lot more space then a ucf10. For the rears youll just need a little more camber and dump it. Its only 13mm more out then mine and its a lot more stretched.[/quote]
 
 
nah i got to lazy and only did that one wheel.... it wont fit the fronts for sure... i have 15mm in the fronts to clear brake on my current wheels...
 
haha..yea they do look lik swallowed up 18's because of the wheel gap... 
 
i would roll on these if i still had the bags on the car but its only on coils rite now..
heres a pic of it when it was on bags..
 
[IMG]http://i41.tinypic.com/2mpfmgx.jpg[/IMG]
vzuptnguyenJanuary 7, 2009
#218295
damn sick ls man. and nice stretch wats the tire specs on the width?
View original BBCode
damn sick ls man. and nice stretch wats the tire specs on the width?
lash56January 7, 2009
#218315
flexinsteelz;218299 wrote:235/35 on 11"...


now thats a nice stretch...

i got 245/35 on a 11.5...
View original BBCode
[quote=flexinsteelz;218299]235/35  on 11"...[/quote]

now thats a nice stretch...

i got 245/35 on a 11.5...
JN.FYCJanuary 7, 2009
#218317
DAMNNNN. That's money, Subscribed!
I can't wait to see everything done, i got a soft spot for silver Ls400's.
Just like Big Steve's & yours.


btw Happy birthday, if it is!
View original BBCode
DAMNNNN. That's money, Subscribed! 
I can't wait to see everything done, i got a soft spot for silver Ls400's.
Just like Big Steve's & yours.


btw Happy birthday, if it is!
chrispyJanuary 7, 2009
#218319
I was gonna get these but you beat me to it. They look great on your car. Looks like you're gonna have to work a bit to fit them. I say keep them on the UCF21.
View original BBCode
I was gonna get these but you beat me to it. They look great on your car. Looks like you're gonna have to work a bit to fit them. I say keep them on the UCF21.
ShaneCJanuary 7, 2009
#218323
nice stretch. what tire brand/model is that? cant wait to see it finished. slow for pot holes!
View original BBCode
nice stretch. what tire brand/model is that?  cant wait to see it finished. slow for pot holes!
dynamicckJanuary 7, 2009
#218339
damn nice stretch. any close ups?
View original BBCode
damn nice stretch.  any close ups?
BIGGZJanuary 7, 2009
#218359
looking half sexy!damn they look good!
View original BBCode
looking half sexy!damn they look good!
BlitzJanuary 7, 2009
#218366
that is some mean stretch
View original BBCode
that is some mean stretch
intezzaJanuary 7, 2009
#218420
Looks damn sexy keep them on the UCF21.
View original BBCode
Looks damn sexy keep them on the UCF21.
DamicciJanuary 7, 2009
#218424
UCF and EF or w/e do not belong in the same picture. Fix please. j/k

Looking good.
View original BBCode
UCF and EF or w/e do not belong in the same picture. Fix please. j/k

Looking good.
flexinsteelzJanuary 7, 2009
#218444
thanks for the comments, man u guys make me wanna keep them on the car.. haha... maybe i shouda test fitted them on the ucf10 then post up the pics.. since the ucf is older and beat up, i can cut the hell out of the springs and fit these wheels and just make it look tight without spending a single dollar...

they are dunlop tires, didnt pay attention to the model tho...
View original BBCode
thanks for the comments, man u guys make me wanna keep them on the car.. haha... maybe i shouda test fitted them on the ucf10 then post up the pics.. since the ucf is older and beat up, i can cut the hell out of the springs and fit these wheels and just make it look tight without spending a single dollar...
 
they are dunlop tires, didnt pay attention to the model tho...
widebody_QJanuary 7, 2009
#218451
Looks like a 275/30 on a 11" wide wheel
View original BBCode
Looks like a 275/30 on a 11" wide wheel
phillygs3January 8, 2009
#218515
Some nice stretch you got there :biggthumpup:
View original BBCode
Some nice stretch you got there :biggthumpup:
geneticJanuary 8, 2009
#218525
hella dope 21, are you on air?
View original BBCode
hella dope 21, are you on air?
flexinsteelzJanuary 8, 2009
#218567
nah im on JP coilovers, it was on air but took it off and sold it to one of my homie which is on this board also but doent post much, hopefully he'll show his car here when he's done... he's comin out strong for 09'..
View original BBCode
nah im on JP coilovers, it was on air but took it off and sold it to one of my homie which is on this board also but doent post much, hopefully he'll show his car here when he's done... he's comin out strong for 09'..
dRo15January 8, 2009
#218604
The dish looks bigger from the pics you took compared to 1Ton. Very nice wheels.
View original BBCode
The dish looks bigger from the pics you took compared to 1Ton. Very nice wheels.
fatfreeJanuary 8, 2009
#218609
Did you happen to change out the tire size?
Because ONE TON VIP sold them with 245 on 11", (was stated on his 'for sale' ads).

Here is his setup:
LINK

It fits so much better on your LS than the old Q:
Forum image
View original BBCode
Did you happen to change out the tire size?
Because ONE TON VIP sold them with 245 on 11", (was stated on his 'for sale' ads).

Here is his setup:
[url=http://www.rimtuck.com/setup.php?id=220]LINK[/url]

It fits so much better on your LS than the old Q:
[img]http://www.rimtuck.com/photos/1228410692.jpg[/img]
flexinsteelzJanuary 8, 2009
#218626
oh ur rite, it is 245.. i got mixed up with my other wheels...
View original BBCode
oh ur rite, it is 245.. i got mixed up with my other wheels...
implayaz_9February 20, 2009
#230437
flexinsteelz;218285 wrote:

Forum image

what are the specs on these wheels?
View original BBCode
[quote=flexinsteelz;218285]
 
[IMG]http://i41.tinypic.com/2mpfmgx.jpg[/IMG][/quote]
what are the specs on these wheels?
flexinsteelzFebruary 21, 2009
#230507
specs r 8.5/9.5 +29 all around...
View original BBCode
specs r 8.5/9.5 +29 all around...
flexinsteelzMarch 14, 2009
#235316
here we go with some new pics... bout to finish up this car once i get on it..

Forum image

Forum image
View original BBCode
here we go with some new pics... bout to finish up this car once i get on it..
 
[IMG]http://i42.tinypic.com/afiuzq.jpg[/IMG]
 
[IMG]http://i43.tinypic.com/34osrk0.jpg[/IMG]
excluesiveonezMarch 14, 2009
#235334
wait, so they arent going on the silver ls?
View original BBCode
wait, so they arent going on the silver ls?
flexinsteelzMarch 14, 2009
#235346
nope... im bout to hack up this one with no regrets...
View original BBCode
nope... im bout to hack up this one with no regrets...
urmyhero4nowMarch 14, 2009
#235382
now thats gangsta..i wish i would have swooped on these when i had them sitting in my garage.
View original BBCode
now thats gangsta..i wish i would have swooped on these when i had them sitting in my garage.
20sburningMarch 14, 2009
#235387
that is fucking sweeettt
View original BBCode
that is fucking sweeettt
flexinsteelzMarch 14, 2009
#235415
thanks yall... so far i only worked on the rear fenders... did a max pull on it... these should fit with no problems...

anyone seen any sick single stage black? im think either single stage black or darkest black i can find with 5 layers of clear and block it down to glass...

this pic rite here is my OG homies car... blocked down 8 times with a single stage black... this fucken car is hellllllla straight and black.... look at the reflection on that car..
Forum image
View original BBCode
thanks yall... so far i only worked on the rear fenders... did a max pull on it... these should fit with no problems... 
 
anyone seen any sick single stage black? im think either single stage black or darkest black i can find with 5 layers of clear and block it down to glass...
 
this pic rite here is my OG homies car... blocked down 8 times with a single stage black... this fucken car is hellllllla straight and black.... look at the reflection on that car..
[IMG]http://i43.tinypic.com/2nvvx3l.jpg[/IMG]
chrispyMarch 14, 2009
#235416
Hey sell those to me. Or trade me for my Scaras. :)
View original BBCode
Hey sell those to me. Or trade me for my Scaras. :)
flexinsteelzMarch 14, 2009
#235419
chrispy;235416 wrote:Hey sell those to me. Or trade me for my Scaras. :)



i dont think im ever sellin these..... i'll be lookin for some 18x12's soon, and if it comes down to it, they might be for sale.... or i'll trade for 2 sets of 18's plus cash on my end... hint hint.. emitz...
View original BBCode
[quote=chrispy;235416]Hey sell those to me. Or trade me for my Scaras. :)[/quote]
 
 
i dont think im ever sellin these.....  i'll be lookin for some 18x12's  soon,  and if it comes down to it, they might be for sale.... or i'll trade for 2 sets of 18's plus cash on my end... hint hint.. emitz...
chrispyMarch 14, 2009
#235427
flexinsteelz;235419 wrote:i dont think im ever sellin these..... i'll be lookin for some 18x12's soon, and if it comes down to it, they might be for sale.... or i'll trade for 2 sets of 18's plus cash on my end... hint hint.. emitz...


http://www.clublexus.com/forums/wheels-classifieds/415053-fs-work-emitz-1500-a.html

?
View original BBCode
[QUOTE=flexinsteelz;235419]i dont think im ever sellin these.....  i'll be lookin for some 18x12's  soon,  and if it comes down to it, they might be for sale.... or i'll trade for 2 sets of 18's plus cash on my end... hint hint.. emitz...[/QUOTE]

[url]http://www.clublexus.com/forums/wheels-classifieds/415053-fs-work-emitz-1500-a.html[/url]

?
flexinsteelzMarch 15, 2009
#235452
yea my eyes been on those set... once i get my money rite, imma hit him up...

but for now, i needa complete the car asap n rock the ordens

fuckin dennis if u read this, come by the house sometimes and block my shit down when its ready for it...
View original BBCode
yea my eyes been on those set... once i get my money rite, imma hit him up... 
 
but for now, i needa complete the car asap n rock the ordens 
 
fuckin dennis if u read this, come by the house sometimes and block my shit down when its ready for it...
chrispyMarch 15, 2009
#235458
Sell Ordens to me, buy Emitz, everybody wins.
View original BBCode
Sell Ordens to me, buy Emitz, everybody wins.
BIG TYMarch 15, 2009
#235477
chrispy;235458 wrote:Sell Ordens to me, buy Emitz, everybody wins.


and then i will take yours chrispy and everyone wins lol
View original BBCode
[quote=chrispy;235458]Sell Ordens to me, buy Emitz, everybody wins.[/quote]

and then i will take yours chrispy and everyone wins lol
siphanracingMarch 17, 2009
#235947
Looks good! I think I've seen you driving around on Norwood one time..though, i might be wrong.
View original BBCode
Looks good! I think I've seen you driving around on Norwood one time..though, i might be wrong.
flexinsteelzMarch 17, 2009
#236059
thanks..nah im never over there on norwood... im mainly cruising in south sac... you'll find me all day on stockton blvd...
View original BBCode
thanks..nah im never over there on norwood... im mainly cruising in south sac... you'll find me all day on stockton blvd...
VIP-UCFMarch 18, 2009
#236169
or at sharky's...
View original BBCode
or at sharky's...
flexinsteelzMarch 18, 2009
#236200
VIP-UCF;236169 wrote:or at sharky's...



hahaha... or you can catch me out of the garage.... any of u guys watch livin the low life, on speed channel? its the episode of Uce car club.... theres a part that they interviewed a guy and he talks about "backyard boogie" that shit was gangsta..... you can watch it on youtube, http://www.youtube.com/watch?v=mxrK8LlIHF0
View original BBCode
[quote=VIP-UCF;236169]or at sharky's...[/quote]
 
 
hahaha... or you can catch me out of the garage....  any of u guys watch livin the low life,  on speed channel?  its the episode of Uce car club....  theres a part that they interviewed a guy and he talks about "backyard boogie"  that shit was gangsta.....    you can watch it on youtube,  [URL]http://www.youtube.com/watch?v=mxrK8LlIHF0[/URL]