wheel fitment question!

Hey Guys,
I have been looking for a set of wheel of my 02 ls430, i found a set of wheel that I really like 20 by 9 +26 in the front, rear is by 10 +39, and the car is going to be lowered with coilover, I won't need any fender work to fit right? thank you

Depends on tire size.

What's the disk height for the front rims? You might have to flatten the lip in the rear...

Oops, sorry guys they are actually 21" I am not sure what's the disk height in the front rims,  they are the work LS105, and mista808 what do you mean flatten the lip in the rear? here is a link [url]http://www.rbwheels.com/index.php?main_page=product_info&cPath=78&products_id=864[/url]..

[URL]http://www.work-wheels.net/products/detail/download_pdf.php?a_down=Catalog_5.pdf[/URL]

According to that the fronts are A disk and the rears are O. Im not sure whether A disk for these wheels clear the front calipers but I have a feeling they will cause they dont even come in R disk.

BTW, hes talking about rolling the fenders.

Got you, so you think I will need to roll the fender for the rear? 21x10 +39? I will sure the front wheel on to see if they clear the caliper, hopefully no spacers are needed in the front. thanks guys!!

the fronts will definitely need to be rolled unless you run a super stretch, which imho is stupid since you won't need to after rolling the fenders.

the rears will be close, but will depends on tire size.

hmm, thanks for all your guys help, what size of tires would you guys recommend? 235/35/21 in the front, 285/35/21 for the rear?

damm too much bling on them wheels.. look like some rims you can buy from the hindus for $1000 rims and tires