JZS_RCTSJanuary 14, 2009
#220271Building a USDM 147
Name is Jimmy, i work for a shop in Canada called RCTS Research and Development, I am currently building a JZS147. Car is a 1993 GS300.Currently the car has;
Exterior:
-5000K 50w HID's low beam
-6000K 35w HID's high beam
-Stock USDM corner fogs with yellow H3 lamps (soon to be HID)
3 sets of rims
-SSR Koenig 18x10 (+9) - 18x11 (-4) (summer)
-Stock Supra MK4 wheels (what i use when my rubber is worn out from too much camber :P)
-Stock Lexus GS rims with snow tires (winter)
Looking to toss on a Junction Produce kit next, and of course PAINT! :)
Engine:
-Custom HKS Intake with intake muffler eliminated
-Upgraded ignition coil / wires / plugs
-HKS downpipe
-HKS Hi-Power exhaust system (120mm x 2)
-Greddy oil filter relocate kit
Just bought an Aristo front cut, so i will be swapping to a GTE motor, with USDM steel turbo's, USDM injectors, with F Con V pro for management. Other parts include MK4 Supra Koyo Rad, HKS intercooler kit.
Brakes and Suspension:
-K-Sport Kontrol fully adjustable coilovers
-OEM discs with Endless CC-X pads
-New OEM upper arms (front)
Just bought a set of MK4 twin turbo Supra Calipers, just in the process of rebuilding them, those will go on there with a Stop-Tech STG2 kit (stainless lines, powerslot rotors, RBF600 fluid)
Other:
-Odyssey 1500DT
-Monster 4g wiring kit
-US Amps 1600.4XT
-2 x Hertz HX600 subs
-Focal 100KRS front speakers
Nothing special as of yet but i have big plans for her.
This seemed like a good forum with some knowledgeable users on these builds, so i figured i would join.
I look forward to being part of the community!
View original BBCode
Name is Jimmy, i work for a shop in Canada called RCTS Research and Development, I am currently building a JZS147. Car is a 1993 GS300. Currently the car has; Exterior: -5000K 50w HID's low beam -6000K 35w HID's high beam -Stock USDM corner fogs with yellow H3 lamps (soon to be HID) 3 sets of rims -SSR Koenig 18x10 (+9) - 18x11 (-4) (summer) -Stock Supra MK4 wheels (what i use when my rubber is worn out from too much camber :P) -Stock Lexus GS rims with snow tires (winter) Looking to toss on a Junction Produce kit next, and of course PAINT! :) Engine: -Custom HKS Intake with intake muffler eliminated -Upgraded ignition coil / wires / plugs -HKS downpipe -HKS Hi-Power exhaust system (120mm x 2) -Greddy oil filter relocate kit Just bought an Aristo front cut, so i will be swapping to a GTE motor, with USDM steel turbo's, USDM injectors, with F Con V pro for management. Other parts include MK4 Supra Koyo Rad, HKS intercooler kit. Brakes and Suspension: -K-Sport Kontrol fully adjustable coilovers -OEM discs with Endless CC-X pads -New OEM upper arms (front) Just bought a set of MK4 twin turbo Supra Calipers, just in the process of rebuilding them, those will go on there with a Stop-Tech STG2 kit (stainless lines, powerslot rotors, RBF600 fluid) Other: -Odyssey 1500DT -Monster 4g wiring kit -US Amps 1600.4XT -2 x Hertz HX600 subs -Focal 100KRS front speakers Nothing special as of yet but i have big plans for her. This seemed like a good forum with some knowledgeable users on these builds, so i figured i would join. I look forward to being part of the community!
