G50 Spoiler

Whats up everyone, 

I bought a spoiler for my Q, Its just the stock Q45t spoiler. But i was wondering if anyone has any tips on how I should go about installing it. It looks pretty tough to measure out the holes and do it straight, but im sure it can be done. anyways let me know if you have done it before and how you did it. thanks yall

Make a template off the base of the spoiler and mark the holes..with paper this should be pretty easy. Then lay it out where you'd like it on the car and mark where you need to drill the holes. Pretty simple and not far off from how most companies do things when they send you a wing that requires drilling. All you need is a template. The rest is straight forward.

Make sure you double check youir measurement first b4 drilling. Also make sure where you are going to dril, that there is no "unseen" wire harness or other improtant pieces that you don't want to be drilling through..

[quote=tech126 ]
Make sure you double check youir measurement first b4 drilling. Also make sure where you are going to dril, that there is no "unseen" wire harness or other improtant pieces that you don't want to be drilling through..
[/quote]
Yep measure twice cut once...or drill.

Ahh cool, i think ill probably make a template. that seems to be a good idea. as for measuring, i will do that also to double check my templet once its layed out on the trunk.