y33 19" rim fitment

It's kinda hard to search and sift thru the forum on my phone so all I wanna know is what it'll take to fit 19x9.5 -8 19x10 -14 on my 97 q45. Tires are 225 in the front and 235 in the rear. The car has coilovers but I wanna know if I'm gonna need to camber the back, roll all around, or pull etc... to fit the rims. Thanks in advance.

you should use the search.. there's plenty of threads that talk about this topic. as for those being able to fit.. coilovers really dumped, with camber, stretch tires, and cut fender tabs should be golden. if you're gonna need more camber just cop some s14 rucas.
anything more agressive than 10/ -20 offset or more you're gonna have to do all of the above plus a light to medium pull on the rear fenders. and anything more agressive than that you obviously have to make them fit and take your rear quarters to a body shop.

I believe the answer to your questions would be yes to all.  On my y33 my rears are 10.5 +10 with a 265/30 stretched and i needed to trim my fenders and i still need to camber a little.  So again yes to all questions.

i did something similar to the rears... iirc my fitment was 19x10 -11. with a wider 245/35/19 (the federal ss595) i was running -7* camber, rolled and slightly newpaper pulled fenders, and that was about it. i was tucking maybe 1/4 of the sidewall. wasn't terribly hard to do.

a lot of guys are running wheels with crazier offsets/widths than i was and it seems like there aren't really any issues.

good luck!

damn y33 just suck wheels in those wheel wells like nothing..i was having troubles on my g50 with 10+7 and that was with custom rear arms.

Yeah can't search it overloads my phone. Thanks for the answers. My car had rims on it before and has been pulled and rolled in the rear. I just didn't know the specs on the previous set. Is there any way I could get away with fitting these wo the s14 rucas? Wanna throw them on but don't wanna pull off the rims for nothing...

[QUOTE=sikn3s;233817]Yeah can't search it overloads my phone. Thanks for the answers. My car had rims on it before and has been pulled and rolled in the rear. I just didn't know the specs on the previous set. Is there any way I could get away with fitting these wo the s14 rucas? Wanna throw them on but don't wanna pull off the rims for nothing...[/QUOTE]

i'm unsure whether you can pull off the camber you might need with stock arms, but even with the s14 rucas, i couldn't get enough camber. my peak ones maxed out at -6.5* at the ride height i wanted, so i had to get them modified at a machine shop. they now go to -9*+, hahaha. but either way, the ruca install isn't terrible, nor are the parts super expensive (obviously, this doesn't apply if you buy ikeya formula or nams)

[QUOTE=clean9945;233590]I believe the answer to your questions would be yes to all.  On my y33 my rears are 10.5 +10 with a 265/30 stretched and i needed to trim my fenders and i still need to camber a little.  So again yes to all questions.[/QUOTE]

265/30 is not stretch on 10.5:innoutrofl2::pat:

my 255's on my 11's aren't stretched. i'm gonna go back down to 245's soon!

the real answer is:

are you a bitch? your answer determines mine.

[QUOTE=ALEXTHESUS*PECT;233914]265/30 is not stretch on 10.5:innoutrofl2::pat:

my 255's on my 11's aren't stretched. i'm gonna go back down to 245's soon![/QUOTE]

Its not a crazy stretch but general tires run a little small.
[IMG]http://i256.photobucket.com/albums/hh175/theotherguy300/012-1.jpg[/IMG]

roll fenders flat out back and roll fenders flat out front and you will be good 10j -14 is not that hard to fit...