how many miliimeters would you say this is ?

by lookin at the rear wheel picture, would you say the distance between the rim and the quarter panel is sticking out about 25mm ? about an inch ? what would u say ?

[img]http://memimage.cardomain.net/member_images/7/web/2107000-2107999/2107698_30_full.jpg[/img]

and what about this picture below ? about 1 inch ? 1.5" inch ?

[img]http://www.betacreate.com/Automotive_Photography/Q45/SL_ON/05.jpg[/img]

25.29mm

[quote=CarlssonRL ]
by lookin at the rear wheel picture, would you say the distance between the rim and the quarter panel is sticking out about 25mm ? about an inch ? what would u say ?

[img]http://memimage.cardomain.net/member_images/7/web/2107000-2107999/2107698_30_full.jpg[/img]

and what about this picture below ? about 1 inch ? 1.5" inch ?

[img]http://www.betacreate.com/Automotive_Photography/Q45/SL_ON/05.jpg[/img]
[/quote]

just dump it and run the bitch like a gangsta ;D

You also gotta consider your camber curve and how much it brings the top of the wheel in as the car is lowered, or the suspension is compressed through normal use... something can stick out 20mm on one car at ride height, but clear the fender when it is moving, but not clear on another car with a suspension of a different design

word.

god bless nissan camber curve, haha. -3 on the highway, -7 going up a driveway. 

what does that car have suspension wise? looks pretty nice in the first pic

2 different cars.

the first one is dorimon, the second is me. The second pic is before fitteng the teins