Thread #17762

F/S: D2Forged 21" VS4 brushed/chrome, Lexus GS/SC/LS430

9 archived posts · 2,898 historical views

SoCalSC4June 16, 2009
#252717

F/S: D2Forged 21" VS4 brushed/chrome, Lexus GS/SC/LS430

Some of you know I had these awesome D2FORGED wheels on my GS; They were actually used as a "placeholder" of sorts while I was working on another wheel project.
This is a fantastic opportunity to own basically a NEW set of D2FORGED 3-piece wheels. They were on the car for month or two but it was never driven in that time.

I've re-configured the lips on these wheels to make them an easier fit for 1GS/2GS/3GS, SC430, or LS430 applications. The way the wheels are now configured they should require little (if any) vehicle modifications. If the vehicle is extremely low you may experience minor rubbing of the plastic fender liners up front when turning, due to the overall diameter of the tires (the 255/30-21s are the same height as 255/35-20, for reference).

The wheels are 5x114.3 with the hubs cut to 60.1mm, hub-centric for Lexus/Toyota vehicles.
Also, they were built to accept big brake kits; the fronts cleared my StopTechs with room to spare and the rears will clear any BBK I can think of.

Specifications:

D2FORGED VS4 5-spoke design
Centers: "BBC" finish, brushed spokes with polished windows & clear coat
Outers: Chrome plated
Inner rims: Charcoal metallic (gloss) powder coat
Center caps: billet aluminum, brushed with clear coat

Front: 21x9.0 +37 with 2.5" lip
Rear: 21x11.0 +49 with 3.5" lip
These would work great with 255/30-21 + 295/25-21 tires. These offsets would look okay on a GS or an LS430 but would be weak on the SC430.

BTW, D2Forged has the Falken FK-452s available on special in these sizes (one set only) for $1000.00 These are the exact tires I had on my car. 100 feet of street use!

When I had these wheels on my car, they were 1/2" wider front & rear with the additional 1/2" at the outside, giving a 3" front and 4" rear lip. This is what is shown in the pics, below. I could easily rebuild the wheels this way at no additional charge. This is quite a strong fitment, especially with the Falken Fk-452s which run very wide in their 21" offerings. A different tire would offer more stretch and make the fitment easier, such as Pirelli NERO in 255/30-21 and 295/25-21. This more aggressive set-up would fit the SC430 quite well.

Keep in mind, my car has trimmed fender lips on all four and all quarters/fenders were pulled before the car was painted. The more conservative set-up would be better for more "Club Lexus-type" wheel guys.

List price for this set is $7100 ($1775 each with BBC centers & powder coated inners).
BTW, I'm in SoCal but would ship them anywhere in the continental US at no charge.

I'll let these go for $4000/set for the wheels only. If you take advantage of the set of Falken rubber from D2-Autosport, the wheels AND tires are $5000/set.

Questions? Get me at [email]bigaudiobob@gmail.com[/email]

A couple VSC members know me and would likely vouch (including John aka VIPStyleCars), and a bunch of ClubLexus guys have dealt with me throughout the years, including the Admin (DaveGS4) and several mods (RICHIE, rominl, RMMGS4, Neo, etc.), and a few other regulars (Joe Z, TTurboPimp, R.U.IN.AW, AlSilverBullet, etc.)

Cheers,
Bob

Pics:
Forum image
Forum image
Forum image
Forum image

Pics:
View original BBCode
Some of you know I had these awesome D2FORGED wheels on my GS; They were actually used as a "placeholder" of sorts while I was working on another wheel project.
This is a fantastic opportunity to own basically a NEW set of D2FORGED 3-piece wheels. They were on the car for month or two but it was never driven in that time.

I've re-configured the lips on these wheels to make them an easier fit for 1GS/2GS/3GS, SC430, or LS430 applications. The way the wheels are now configured they should require little (if any) vehicle modifications. If the vehicle is extremely low you may experience minor rubbing of the plastic fender liners up front when turning, due to the overall diameter of the tires (the 255/30-21s are the same height as 255/35-20, for reference).

The wheels are 5x114.3 with the hubs cut to 60.1mm, hub-centric for Lexus/Toyota vehicles.
Also, they were built to accept big brake kits; the fronts cleared my StopTechs with room to spare and the rears will clear any BBK I can think of.

Specifications:

D2FORGED VS4 5-spoke design
Centers: "BBC" finish, brushed spokes with polished windows & clear coat
Outers: Chrome plated
Inner rims: Charcoal metallic (gloss) powder coat
Center caps: billet aluminum, brushed with clear coat

Front: 21x9.0 +37 with 2.5" lip
Rear: 21x11.0 +49 with 3.5" lip
These would work great with 255/30-21 + 295/25-21 tires. These offsets would look okay on a GS or an LS430 but would be weak on the SC430.

BTW, D2Forged has the Falken FK-452s available on special in these sizes (one set only) for $1000.00 These are the exact tires I had on my car. 100 feet of street use!

When I had these wheels on my car, they were 1/2" wider front & rear with the additional 1/2" at the outside, giving a 3" front and 4" rear lip. This is what is shown in the pics, below. I could easily rebuild the wheels this way at no additional charge. This is quite a strong fitment, especially with the Falken Fk-452s which run very wide in their 21" offerings. A different tire would offer more stretch and make the fitment easier, such as Pirelli NERO in 255/30-21 and 295/25-21. This more aggressive set-up would fit the SC430 quite well.

Keep in mind, my car has trimmed fender lips on all four and all quarters/fenders were pulled before the car was painted. The more conservative set-up would be better for more "Club Lexus-type" wheel guys.

List price for this set is $7100 ($1775 each with BBC centers & powder coated inners).
BTW, I'm in SoCal but would ship them anywhere in the continental US at no charge.

I'll let these go for $4000/set for the wheels only. If you take advantage of the set of Falken rubber from D2-Autosport, the wheels AND tires are $5000/set.

Questions? Get me at [email]bigaudiobob@gmail.com[/email]

A couple VSC members know me and would likely vouch (including John aka VIPStyleCars), and a bunch of ClubLexus guys have dealt with me throughout the years, including the Admin (DaveGS4) and several mods (RICHIE, rominl, RMMGS4, Neo, etc.), and a few other regulars (Joe Z, TTurboPimp, R.U.IN.AW, AlSilverBullet, etc.)

Cheers,
Bob

Pics:
[IMG]http://lh4.ggpht.com/_rnj4PRHtx6M/Sjb6ZKlVVII/AAAAAAAAPFg/22MVngDeO4U/s512/DSC08797.JPG[/IMG]
[IMG]http://lh6.ggpht.com/_rnj4PRHtx6M/Sjb68dPaa1I/AAAAAAAAPGE/_SKdIIBxMiQ/s576/DSC08855.JPG[/IMG]
[IMG]http://lh5.ggpht.com/_rnj4PRHtx6M/Sjb7SK22u1I/AAAAAAAAPGM/UpTyZGEIUzU/s512/DSC08874.JPG[/IMG]
[IMG]http://lh3.ggpht.com/_rnj4PRHtx6M/Sjb6PKi8URI/AAAAAAAAPFY/HTrO6bE8Jw4/s512/DSC08892.JPG[/IMG]

Pics:
SoCalSC4June 16, 2009
#252718
By the way, there are NO issues with these wheels. They aren't bent, curbed, or otherwise have any "skeletons." Like I said, I actually never drove the car on them more than in my condo complex.

This was the first set of 21" VS4s D2FORGED ever made. I ordered them NEW.

Center caps and lug nuts are included at no charge, of course.

And if you have an SC 430 or 3GS I can drill the inner rims to accommodate the Tire Pressure Sensors - again, at no charge.
View original BBCode
By the way, there are NO issues with these wheels. They aren't bent, curbed, or otherwise have any "skeletons." Like I said, I actually never drove the car on them more than in my condo complex.

This was the first set of 21" VS4s D2FORGED ever made. I ordered them NEW.

Center caps and lug nuts are included at no charge, of course.

And if you have an SC 430 or 3GS I can drill the inner rims to accommodate the Tire Pressure Sensors - again, at no charge.
jaynick808June 16, 2009
#252737
niiice. list price of 7100! :goyou:
high offsets but damn looks like a hell of a deal for cherry 21"s
View original BBCode
niiice. list price of 7100! :goyou: 
high offsets but damn looks like a hell of a deal for cherry 21"s
junjdmJune 16, 2009
#252741
wow.....nice wheels....GLWS
View original BBCode
wow.....nice wheels....GLWS
SoCalSC4June 16, 2009
#252746
jaynick808;252737 wrote:niiice. list price of 7100! :goyou:
high offsets but damn looks like a hell of a deal for cherry 21"s


Keep in mind, the way they are shown on the car, the offsets aren't that high!
Also, my camber adjusters are set as POSITIVE as possible (this works out to -2.3 degrees)
they would be an easier fit with the camber adjusted more negatively.

The old way (photos), they would sit the same as 20x9 +24 and 20x10 +24.
Pretty stout without any tire stretch.

If I had it to do over, I'd run 245/30-21 and 255/30-21 on 9.5" & 11.5"

Thanks for the kind words and well wishes!

Forum image
View original BBCode
[QUOTE=jaynick808;252737]niiice. list price of 7100! :goyou: 
high offsets but damn looks like a hell of a deal for cherry 21"s[/QUOTE]

Keep in mind, the way they are shown on the car, the offsets aren't that high!
Also, my camber adjusters are set as POSITIVE as possible (this works out to -2.3 degrees)
they would be an easier fit with the camber adjusted more negatively.

The old way (photos), they would sit the same as 20x9 +24 and 20x10 +24.
Pretty stout without any tire stretch.

If I had it to do over, I'd run 245/30-21 and 255/30-21 on 9.5" & 11.5"

Thanks for the kind words and well wishes!

[IMG]http://lh3.ggpht.com/_rnj4PRHtx6M/Sjb6ikN2mPI/AAAAAAAAPFo/pEL9_fpHtVE/s400/DSC08809.JPG[/IMG]
VIPStyleCarsJune 16, 2009
#252849
Bob is a great guy. Been an extremely easy guy to work with. Good luck on the sale buddy!
View original BBCode
Bob is a great guy.  Been an extremely easy guy to work with.  Good luck on the sale buddy!
mdenogaJune 16, 2009
#252854
There is no need to vouch for this guy. He has been very helpful and supportive to this forum. These wheels and the car are fucken awesome. Good luck with the sale.

John, I think these wheels are calling you. lol
View original BBCode
There is no need to vouch for this guy. He has been very helpful and supportive to this forum. These wheels and the car are fucken awesome. Good luck with the sale.

John, I think these wheels are calling you. lol
VIPStyleCarsJune 16, 2009
#252862
mdenoga;252854 wrote:There is no need to vouch for this guy. He has been very helpful and supportive to this forum. These wheels and the car are fucken awesome. Good luck with the sale.

John, I think these wheels are calling you. lol


Why do think I chime'd in on this thread.. they are calling me.. too bad my car isn't 100% up and running :P
View original BBCode
[QUOTE=mdenoga;252854]There is no need to vouch for this guy. He has been very helpful and supportive to this forum. These wheels and the car are fucken awesome. Good luck with the sale.

John, I think these wheels are calling you. lol[/QUOTE]

Why do think I chime'd in on this thread.. they are calling me..  too bad my car isn't 100% up and running :P
SoCalSC4June 17, 2009
#252968
Thanks for the kind words, guys.

The only reason I'm really selling these: I started my own wheel company!

I'd make a special deal for automotive website admins....

:)
View original BBCode
Thanks for the kind words, guys.

The only reason I'm really selling these: I started my own wheel company!

I'd make a special deal for automotive website admins.... 

:)