A couple different rims choices.

Trying to decide on some rims.  The first two are the same design, one is silver and the other is hyperblack.  The third rim is a Fusion Flex.  All the rims are 20x9.5 all around.  They are all 25mm offset.
[IMG]http://i78.photobucket.com/albums/j101/immacuminu/ST-5%20HYPER%20SILVER/DSCN7185.jpg[/IMG]
[IMG]http://i78.photobucket.com/albums/j101/immacuminu/ST-5%20HYPER%20BLACK/DSCN7176.jpg[/IMG]
[IMG]http://theautomotiveworks.startlogic.com//Fusion/FlexChrome/water/eBaySearch_water2.jpg[/IMG]
They will be going on this car, and yes it is getting a drop over the winter cause I don't have time to do it now between working full time and going to school full time.
[URL]http://i244.photobucket.com/albums/gg17/focused0708/2007SaturnAura009-1.jpg[/URL]

Oh and I forgot to mention that I am trying to keep a clean look, something that will look like it came from the factory.

and this is going on ....

I would keep searching

It is going on the car in the link at the end of the first post.

It's too bad your bolt pattern is so unusual (5x110). If you consider wheel adapters you're choices increase immensely.
If you won't consider adapters then I'd go with the 3rd chrome choice. Problem with that is I know you're going for a VIP look and none of the options scream VIP IMHO.
It depends how dedicated you are to this. If it were me I'd get a conservative offset 5x114 wheel and use adapters. Then you can roll the fenders and use adapters and acheive the look I think you're going for (read your intro thread too).
You can get used wheel/tire combos off this site for around the same budget as the wheels you posted.

keep searching for rims.

I plan on running spacers with a different bolt pattern, prolly 5x112 so I can put these on.....
[IMG]http://i.ebayimg.com/17/!BcyjM!g!Wk~$(KGrHqYH-CQEq)un6mUlBK2BHNwoWw~~_12.JPG[/IMG]
I just don't know if the 20x10's will fit in the back of my car.  I will do some measuring once I lower it more.  If you have any suggestions on other wheels just put up the name or pics of them so I can check them out.

Do you own those as of right now? If not, I say forget'em. They are nice looking wheels but they are not anywhere near the quality of wheel to be considered VIP.
You'll find a good set of used 'quality' (Work, Weds, AME etc..) if you give it some time.

Ha! Yeah stay away from Axis wheels! Not vip at all... I use to run em and hated them after a week....

[QUOTE=SinisterXR;279108]I plan on running spacers with a different bolt pattern, prolly 5x112 so I can put these on.....
[IMG]http://i.ebayimg.com/17/!BcyjM!g!Wk~$(KGrHqYH-CQEq)un6mUlBK2BHNwoWw~~_12.JPG[/IMG]
I just don't know if the 20x10's will fit in the back of my car. I will do some measuring once I lower it more. If you have any suggestions on other wheels just put up the name or pics of them so I can check them out.[/QUOTE]
 
these ones are much nicer, just gotta get the original ones that this brand copied from!

[QUOTE=GEE702;279087]I would keep searching[/QUOTE]

:thumbsup:

Can anyone photoshop my car with the d3s's or the euroline DH's on it? and with a nice conservative drop?
 
any help would be much appreciated.  Thank you for all the comments thus far.

As you can tell I have very very limited PS skills.
 
[IMG]http://i38.photobucket.com/albums/e117/Schnitz9/2007SaturnAura009_DH.jpg[/IMG]
[IMG]http://i38.photobucket.com/albums/e117/Schnitz9/2007SaturnAura009_D3S.jpg[/IMG]

I like it with your wheels on it Schnitz

I have been searching some more and have come across some wheels that I like.  What about the Lexion 401's?

there are the 401's and the d3s in the black market right now for good prices.  cant go wrong with either one.

Pretty much every european wheel maker has TONS ofwheels in this bolt pattern. Schmidt, borbet, keskin, ats, so on, so on.