tire size for 18x8.5 on a previa??
I need some help guys!! i just bought some rims for my 91 previa. the sizes are 18X8.5 +38 offset all around. what will the best tire size for these? or maybe even pictures?
thanks
View original BBCode
I need some help guys!! i just bought some rims for my 91 previa. the sizes are 18X8.5 +38 offset all around. what will the best tire size for these? or maybe even pictures?
thanks
just test fit em when they come in, check how much clearance you have, and get a tire accordingly....215/35 if its a tight fit.
View original BBCode
just test fit em when they come in, check how much clearance you have, and get a tire accordingly....215/35 if its a tight fit.
Is your Egg already dropped? Or is it still stock height? This would highly determine how tall of a side wall that you will need to run (also to kill the wheel gap). Looking at those offsets you should not have any rubbing or clearance issues. Maybe might even want to run spacers. As BAHC wrote, do a test fit and you will know where to go from there.
Sukoshiyoshi
View original BBCode
Is your Egg already dropped? Or is it still stock height? This would highly determine how tall of a side wall that you will need to run (also to kill the wheel gap). Looking at those offsets you should not have any rubbing or clearance issues. Maybe might even want to run spacers. As BAHC wrote, do a test fit and you will know where to go from there.
Sukoshiyoshi
thanks for the replies guys... the egg is currently at stock ride height because i can't find anybody selling springs or coilovers in the US!!!! anyways... i was looking at Mdenoga's egg with the sc430 oem rims on his egg and it looked to be flushed with the fenders. and the size for the sc430 wheels are:
* sc430 wheels: 18x8 +45 offset all around
* my new wheels: 18x8.5 +38 offset all around
so with my offset being 7 digits lower then the sc430 and .5 inches wider what will be the best setup?
steve
View original BBCode
thanks for the replies guys... the egg is currently at stock ride height because i can't find anybody selling springs or coilovers in the US!!!! anyways... i was looking at Mdenoga's egg with the sc430 oem rims on his egg and it looked to be flushed with the fenders. and the size for the sc430 wheels are:
* sc430 wheels: 18x8 +45 offset all around
* my new wheels: 18x8.5 +38 offset all around
so with my offset being 7 digits lower then the sc430 and .5 inches wider what will be the best setup?
steve
well that depends on what size tires mike is running on those sc430 wheels...he also used to run Weds with good fitment, so you might want to PM him about that if he doesn't chime in here. You're wheels are gonna stick out 13mm more than his sc430's but you also have to consider that he's on air..iirc
View original BBCode
well that depends on what size tires mike is running on those sc430 wheels...he also used to run Weds with good fitment, so you might want to PM him about that if he doesn't chime in here. You're wheels are gonna stick out 13mm more than his sc430's but you also have to consider that he's on air..iirc
im running 19x9 +20 with 215/35 in the front and slammed. coilover max out. so youll be fine with 18
View original BBCode
im running 19x9 +20 with 215/35 in the front and slammed. coilover max out. so youll be fine with 18
215/35's the only way to roll on 18's
View original BBCode
215/35's the only way to roll on 18's
18x8 Lexus SC430 wheels: I was running 225/45R18
19x8.5 Weds Kranze Bazreia 225/35R19
Daily driving.
View original BBCode
18x8 Lexus SC430 wheels: I was running 225/45R18
19x8.5 Weds Kranze Bazreia 225/35R19
Daily driving.