Camber kit + air suspension 92 Aristo/gs300

Hi, I've seen a few gs300 with a load of negative camber. How do they do it. Stock does not have much adjustment. Is there a kit I can buy ? Saw the cars platinum VIP did.
Car is currently lowered on tanabe Springs and on kyb shocks. Thinking about putting an air setup in. Not sure how difficult this is and if possible.
If anyone can point me in the direction of where to buy parts and advice it would be greatly appreciated.
Thanks

clublexus.com has a load of info on this...Vipdaily, Vipin626 and pingpong89. search that and should get u going

AIRRUNNER.
camber arms.
low offset wheels.
done.

Cool thanks guys I'll check it out

Hmm not found a definitive answer on where to source camber arms from. Anyone know ?

[url]http://www.nagisa-auto.com/products/spa_toyota/index.html[/url]

I know it says aristo but I don't know your chassis code.

for the fronts,some 1GS owners used 2GS upper control arms.as for the rear I don't know.

Didn't realise you could swap the front upper control arms. betwwen mk1 and mk2. 
Interesting......
You know anyone running this setup ?

check out these links for more info on the 2GS UCA's.
[url]http://www.clublexus.com/forums/gs-first-generation/384142-2gs-front-upper-control-arms-really-do-fit.html[/url]
[url]http://www.clublexus.com/forums/gs-first-generation/451149-adjustable-control-arms-anyone.html[/url]
[url]http://www.clublexus.com/forums/gs-first-generation/458487-its-official-1st-generation-gs300-aristo-adjustable-upper-control-arms.html[/url]

THE SPC Upper control arms i had were great and had tones of adjustability. they also offered replacement Ball joints for around $30 so if anything ever deteriorated on you it would be a cheap fix.

Cool thanks guys I'll take a look. For info the standard upper arms are the same part number between mk1 and mk2. So no mod required

magic!