Thread #2060
i need alot of utility factor to carry my art supplies when i transfer colleges. anyways something i was considering. input from the vip hommies please.
Looks surprisingly good! I had been wondering what Eurolines would look like on an older Sdime, definitely works much better on the newer model.
i like it.. thats gangster!
Im diggin it Im a former S10 owner so Im partial I guess I also love Eurolines so.....
i like it. one of the nicest S10s ive seen around
doesnt look bad but it might be trying too hard IMO
its just wheels
Leave the headlights clear, but chrome the grille (but black out the bow tie), and remove the fog lights = world of difference
Daaaaaaaaaaaaaaaannnng :smitten:
does work make a 5 x 120 bolt pattern? or can that be customed drilled by work?
dont forget a tonneau cover if you put art material in the bed like i do.. some of my light weight materials flew from my bed. and make sure you drain the air tank if you go air.
dont see to many mini's with nice wheels
Whats your wheel setup, looks like a very nice stretch on that back. Very very nice truck, don't dig mini trucks or that matter any trucks but this one :smitten:
One Ton VIP wrote:
Leave the headlights clear, but chrome the grille (but black out the bow tie), and remove the fog lights = world of difference
[quote=One Ton VIP ] Leave the headlights clear, but chrome the grille (but black out the bow tie), and remove the fog lights = world of difference [/quote] Photoshop that concept... btw, it looks better than most of the cars we normally see.
this is only a chop but thanks for flattering my photo shop skills ;D. the new dime all weighs on my acceptance to the art center. i am quite nervous. the dime i am looking at is already equipped with air-ride (10-switches), and some other goodies, but the dude wants a hefty 15k for it, i am hoping he will go down on the price. i've been getting a lot of flack from other people for even considering an s-10 and "abandoning" imports but i am not partial to where a car comes from. i am happy to see mostly positive responses here (shows how much more open-minded you guys are). btw, hardtop tonneau would be included so my crap wont fly around lol. on wheels spec, id probably go 20x10, +6mm offset all-around. there are issues with clearing the nut for screw that holds the gas tank so i might end up using spacers also...or if any of you formal mini-truckers or fitment gurus have any other suggestions im all open ears. thanks for the suggestion, oneton...it looks so much better.
now that is a truck i would definitely want :smitten: :smitten: :smitten:
That's more like it... kinda cool!
nice truck!!! Now I wanna have one in my garage...hehe
ever considered a Toyota Tacoma? found this pic on a quick google search: [img]http://img.sportruck.com/feature/pharcyde/matt2.jpg[/img] that's an older model, but this is a 99 that looks a TON better in my opinion (not nearly as plain styling similar to the Nissan Hardbody pickups) [img]http://4wheeldrive.about.com/library/uc/ucgraphics/justin_shankThumb.jpg[/img] I mean, I'm sure you're evaluating your options and stuff, but I've had a few friends w/ Tacoma's that offroaded them (don't really have any minitrucker friends) with alot of luck. even the 2wd models can go alot of places bigger trucks struggle with, with just a slight lift and bigger tires. just my $.02
do it..do it.. ;D
gmckey wrote:
ever considered a Toyota Tacoma?
[quote=gmckey ] ever considered a Toyota Tacoma? [/quote] already have one. 98 pre-runner edition 2wd with 31 inch knobbys. haha, now its time to go low as possible with the chevy.
matt is legit wrote:
already have one. 98 pre-runner edition 2wd with 31 inch knobbys. haha, now its time to go low as possible with the chevy.
[quote=matt is legit ] already have one. 98 pre-runner edition 2wd with 31 inch knobbys. haha, now its time to go low as possible with the chevy. [/quote] haha then you know exactly what I'm talking about! I've never been big into off roading, but I live in Texas so I've got plenty of friends who are... all I remember is being in a 4x4 K5 Blazer w/ 4" suspension lift/4" body lift on 36" tires not being able to make it up some hill some guy in a T100 2wd went up not 10 minutes earlier... then again it was all muddy and that trucks probably 1/2 the weight of the blazer.
i didn't want to start a new thread because i know most of you are pretty pissed with the heavy influx of non-vip cars being posted recently. anyways i finally purchased my new ride. [img]http://i47.photobucket.com/albums/f194/legitamatt867/Picture069.jpg[/img] too bad it doesn't lay frame. plans for some new wheels later as soon as i recover some money. any suggestions for 19s? i was looking at these- [img]http://memoryfab.com/wheels/used/imgmed_20060203185412_1.jpg[/img] not sure if they will fit but specs are F 19x10 +18 R 19x11 +18. don't forget i still need to run pcd adapters. again, suggestions welcomed.
Nice... is that on bags, or is it just quite low at the front... Should look sick with those MAEs on it!
If you want utility, you shoulda went with an Astro :D [url=http://img211.imageshack.us/my.php?image=a73dg8.jpg][img]http://img211.imageshack.us/img211/8263/a73dg8.th.jpg[/img][/url]
Dominik wrote:
Nice... is that on bags, or is it just quite low at the front... Should look sick with those MAEs on it!
the_saint wrote:
If you want utility, you shoulda went with an Astro :D
[quote=Dominik ] Nice... is that on bags, or is it just quite low at the front... Should look sick with those MAEs on it! [/quote] yes sir it is on bags, but i would like to get the back to sit lower. [quote=the_saint ] If you want utility, you shoulda went with an Astro :D [url=http://img211.imageshack.us/my.php?image=a73dg8.jpg][img]http://img211.imageshack.us/img211/8263/a73dg8.th.jpg[/img][/url] [/quote] haha i heard astros are pretty big in japan. that white one looks NICE! any close ups?
Sorry, no closeups, I found that pic a while back just fartin around on the net. I went through a short I want a JDM styled Astro phase, but 'the boss' put the brakes on that one pretty quick. :knuppel2:
Cool now slap on the MAE's and start cutting.
the MAE's will work work, the 11's will probably have clearancing issues so you may have to run spacers rear. hell, you may have to run spacers on the front too! but I think they should both clear... ;) edit: sorry, remembered you HAVE to run adapters, anything 20mm or more of an adapter should clear clearancing issues but might be a problem over 40mm. Just from the looks of it though, I haven't measured anything, I'm going off of pictures other peoples measurements and sizing.
black grille.
matt is legit wrote:
i didn't want to start a new thread because i know most of you are pretty pissed with the heavy influx of non-vip cars being posted recently. anyways i finally purchased my new ride.
too bad it doesn't lay frame.
[quote=matt is legit ] i didn't want to start a new thread because i know most of you are pretty pissed with the heavy influx of non-vip cars being posted recently. anyways i finally purchased my new ride. [img]http://i47.photobucket.com/albums/f194/legitamatt867/Picture069.jpg[/img] too bad it doesn't lay frame. [/quote] Are those iRocs? What Size? & if you plan on Selling them, Pm me i have a friend thats intrested in them.
notch the rear frame and get 4 link.
username wrote:
notch the rear frame and get 4 link.
BoOsty wrote:
Are those iRocs?
What Size?
& if you plan on Selling them,
Pm me i have a friend thats intrested in them.
[quote=username ] notch the rear frame and get 4 link. [/quote] yeap yeap i was looking at a 4 link, but i think im gonna throw in money for some new rims first which brings me to... [quote=BoOsty ] Are those iRocs? What Size? & if you plan on Selling them, Pm me i have a friend thats intrested in them. [/quote] yes they are irocs. i know the diameter is 18 but not to sure about width and offset. im pretty sure you can find out on ebay because i dont think they offer custom width or offset. but yes i may be selling them. how much is your friend looking to spend? PM me a price, boosty. thanks.
yay matt, let me spring for some sort of air sus and we can hit switches together =P
