Oh, Hello there!

[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/IMG_7657.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/IMG_7645.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/IMG_7641.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/IMG_7654.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/IMG_7655.jpg[/IMG]

And the presidents status.....
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/IMG_7643.jpg[/IMG]
None.

gotta luv black on black crime

Sweet, those jaf badges is the shit, :signdammit: i wish i had motivation to start my president project right now, maybe after i get the ls430 =)

Took me quite a bit of time to find it and 124k miles. Had to swipe from SD. 
I am sure I over paid abit but finally got the combo i was looking for.

[QUOTE=Damicci;306810]Took me quite a bit of time to find it and 124k miles. Had to swipe from SD. 
I am sure I over paid abit but finally got the combo i was looking for.[/QUOTE]
 
As long as u r happy n u got wat ur looking for that's all that matters, wish I had black on black but I'm still happy with mine, can't Wait to c what u do with it

Looks like a beauty in my book, try some scratch-x to take away the residue of the Infiniti logo. It worked great for me!!

Kidzik is going to buff up the paint and take care of the inifniti logo residue. Just looking for maintenance things that need to be done right now. trans flush, got the dealer to replace knock sensor and valve cover gaskets and new plugs. So while I am upping the maintenance I will be scouring Upgarage and YAJ for some coils

that interior is clean... literally. sweet ride... more updates... on both rides please. :biggthumpup:

nice pick up

Thanks got a line on some s14 coilovers for the rear so if i can get my hands on some y33 fronts or maybe s14 convert it'll be sitting low soon.

The interior is probably 8/10 few wounds in the leather in places you wouldn't normally look and the arm rest on the driver door was worn down bad. Looks like someone tried to buff the leather/vinyl and burned it bad. So I am having the wife redo it. found some decent fabric to use at a local shop here.

why does it have the light wood on the door trim and then the dark wood trim everywhere else??

Its the lighting in the pics they are the same color.

Gotcha..haha my bad

LOOKEY LOOKEY

[IMG]http://img237.auctions.yahoo.co.jp/users/5/1/8/3/missile7jp-img600x450-1265530258hpvlwx38324.jpg[/IMG]

[URL]http://page18.auctions.yahoo.co.jp/jp/auction/w47906871[/URL]

That is not bad but doesn't show if it comes with everything. says it does but doesn't say the compressor type.

Still out of my price range. Will still get this car low one way or another.

yo nice job damicci....i see u traveling at ur own pace now....im still looking for a reasonable 
Q to get back into

Yeah I was getting tired of having an older car. So moved 3 years fwd. haha :(
It was either dump the tax return into the president or get that Y I always wanted.

GL finding that G50. Not alot of nice ones for sale recently lots of abused garbage out there.
Just have be patient.

Oh nice. I have always wanted a y33. I always tell myself thought that I need to finish one project before I move onto another one.

Good find! Congrats!

[QUOTE=Benji;309286]Good find! Congrats![/QUOTE]
Thanks, your car was one of my 1st inspirations for finding a Y.

@Ron
I know I really wanted to finish the Pres but it would be easier for the family to just sell it and let the wife buy an SUV. Then maybe she'll get off my back about modding the Y. :pat:

[QUOTE=Damicci;309549]Thanks, your car was one of my 1st inspirations for finding a Y.[/QUOTE]Thanks! I'm looking forward to your build. I'm sure it's gonna be dope. :)

And yes it will be going lower after i roll and pull the fenders
[IMG]http://i15.photobucket.com/albums/a376/Damicci/3add9ab6.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/eed5ac96.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/0640b084.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/1f32ca92.jpg[/IMG]

can't wait to see it dropped with those wheels! gonna be sick!!!

once coils are on its gonna be sweet!

gonna look dope!!

Coils are on actually I just left it at a lil lower than normal ride height to make sure I clear the wheels.

Cell phone pics. Working on getting a small shoot done with JunJun.
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/c625df1f.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/ecada4cf.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/be04e7e7.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/2efd299a.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/Cima/665c1bf4.jpg[/IMG]

That looks so sick.  I wanted to rock the 7 series wheels on mine too oh well you beat me.

wheels look good. nice concave face

Thought you sold those wheels and adapters...looks sweet!

Doesn't matter who beats who. Just do it if you like it.

Yeah I think the wheels suit the car very well. Hell look better on this car then on the 7 series if you ask me.

Thanks for the compliments guys. Definitely need to touch up on the paint but the car was keyed before I bough tit so it will need to be repainted more than likely.

looks good dammici.  drop it a half in more, haha.

Damn, lookin fresh
Those wheels look huge up in there (no homo)
I agree with more lower too

I would go lower but i need arms and some type of camber adjustment for the rear.

Broke did you relocate your harness in the wheel well? Thinking I may need to do that if I go lower.
EDIT: Actually the rears do not go lower unless take off some of the pre-load.

Really?? Ya gotta take out preload to get it lowered. I had a gang of preload and still had abilitly to go lower. Now I've change the way things were. What coils are they again??
Yeah, doesn't look like you need a whle lot more camber. PBM's arms will get ya more than whatcha need. 

As for the harnesses, there like a lil crevis up in the frame that I tucked mine up into. Straight ziptied and that'll do it =)

Yeah as for camber my main concern was if i go with a different tire setup. When we were rolling the fenders, I disconnected the lower perch and jacked the wheel up into the fenders and there was just enough clearance to slide a card through. Plus the Nankangs have this lip on the side wall (protects wheel from rash probably) that hits the fender as it sits now. I don't want to pull anymore so I would need a tad more camber.

I yeah saw the crevice that harness is in now and looks ok just may need to tuck that harness up in there a lil more.

Also the rears are K-sport and Buddy Clubs in the front. (K-Clubs) hahaha

Card clearances are all ya need 

Gonna look dope when ya get that lil bit of camber and get it lower =)

DIY Y33 pillowball mount 

First step was to remove the pillowball from the S-chassi suspension. Typically this is done by removing the 4(6) hex screws securing the pillowball to the top hat(camber plate)
The pre-drilled Y33 top hat is at the top and the S-chassi camber plate is at the bottom with the pillowball mount.
[IMG]http://i15.photobucket.com/albums/a376/Damicci/011ac22e.jpg[/IMG]

Next here is the pillow ball mount separated.
[IMG]http://i15.photobucket.com/albums/a376/Damicci/29c1a744.jpg[/IMG]

and here is the new home of the pillowball mount set in with the Y33 top hat.
[IMG]http://i15.photobucket.com/albums/a376/Damicci/0ef1d901.jpg[/IMG]

Really simple, so no serious DIY would be needed but just wanted to show some pics of what I did.
The hardest part was lining up the holes. But this is so worth the effort as I got rid of my binding problem and now no longer need camber plates until I am ready to add more camber.

Good find, looks clean.

Small Impromptu shoot. This was mainly for me and my buddy to determine angles for next time.
[IMG]http://chrissummitt.com/car/content/bin/images/large/Car_Shots_7_8_2010_13.jpg[/IMG]
[IMG]http://chrissummitt.com/car/content/bin/images/large/Car_Shots_7_8_2010_18.jpg[/IMG]
[IMG]http://chrissummitt.com/car/content/bin/images/large/Car_Shots_7_8_2010_50.jpg[/IMG]
[IMG]http://chrissummitt.com/car/content/bin/images/large/Car_Shots_7_8_2010_66.jpg[/IMG]

[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8275.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8264.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8278.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8288.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8286.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8284.jpg[/IMG]

[IMG]http://i15.photobucket.com/albums/a376/Damicci/Auto/VIP/20100709-IMG_8252.jpg[/IMG]

wow, that hot

Looks really good man. 


-Smitty

Looks nice.  Isnt that where Rich went to shoot his white Y33 back in the day?  If so did you get harassed like he said he did?  Thats a vip magazine type location

@Soda Thanks man.

@Smitty Pfft Nothing compared to your M.

@Agi I am not sure, I remember telling him about this location but not sure if he already knew about it or what. He told me where he took the night shots of his car but I haven't found that location yet. need to look up his old posts and see.
[url]http://www.vipstylecars.com/forums/showthread.php?t=5817&highlight=Broadway[/url]
EDIT Found it. Looks like I will need to hit up that place. Next time I may check otu the back area there is a water fountain. Tucson has alot of nice places besides commercial buildings and desert roads that you normally see pictures being taken at.

Lookin good man!!!

Looks great!  Now we have to make plan for meet.
btw, where did you do photo shoot, its cool place...

Thanks Chris, Jin. I just got my VIP World Cup Issue. Nice coverage.

The location is in Tucson. It's a private club but seems to be open at night. So far so good.
Planning on heading out that way again tomorrow night with Junior.

Great lookin car dam!
 
Nice shoot location too.  Where is that?

The Q's comin together nicely
And great spot for snappin them pics. 

Ever get your RUCA's to get it lower??

Not yet. the rear brakes have started to stick on the pass side so I will be replacing those soon. and trying to finish up my interior before this car show next month. Was asked to use my car as a exhibition car. Paint looks like shit though but oh well.

Handle.
I'm the same way about my paint. Its disgusting, no lie. But I can spend half a day detailin it, and it'll look presentable. You'll be so impressed once ya do it

Not with the key marks. HATERS!

:madgo:
Damn, nevermind. Sucks they did that

[QUOTE=Damicci;331969][IMG]http://chrissummitt.com/car/content/bin/images/large/Car_Shots_7_8_2010_66.jpg[/IMG][/QUOTE]
 
This picture reminds of an add for infiniti when the car first came out.
:biggthumpup:

those pictures are money :biggthumpup:

Thanks guys. Still working out the interior right now as well.

Vicious! Welcome back Damicci... I dont think world will be ready to handle you when this is done.

Thanks, I have some random things I am trying to accomplish all at one time which not a good idea but meh.

I asked Jin if you guys were going to the Firebird show Aug 28th. Hopefully we will see you guys out there.

Finished the roof handles:
[IMG]http://i15.photobucket.com/albums/a376/Damicci/8727c630.jpg[/IMG]
[IMG]http://i15.photobucket.com/albums/a376/Damicci/9e80b4ef.jpg[/IMG]

And got bored with the center caps so hooked them up a little.
[IMG]http://i15.photobucket.com/albums/a376/Damicci/7bc689bd.jpg[/IMG] :shrug: