y33 coilover caliper bracket bolt

im installing my coilovers noticed that my caliper bracket bolts do not fit. do i have to drill them out use s14 bolts or what??????

y33 bolts are thicker diameter than s14, what coilovers are you running? Prob Y32 coilovers

y33 cima algernons

as far as I know if you run Y32 coils you need to enlarge the caliper mounting holes, if they are Y33 then they should bolt up. In my Y33 I'm running s chassis conversion and had to enlarge the caliper mounting holes just the same as you do with Y32 coils on a y33

Yup, just what he said

+1 one. Odd that you have Y33 suspension but the holes don't line up. you also mention using S14 bolts. If your using Y33 you shouldn't need S14 bolts. 

Are they Y33 Gloria/Ced coils? <--- haha dumbass I just reread the second post from OP.

Question? Is it the stock caliper on the R32 caliper?

[LEFT]i have y33 jic tar vip coilovers and my holes were just a a little bit to small.i had to dremel it out tiny bit.like a little lower then the paint inside the hole.till the bolt was snug[/LEFT]