Thread #21377
bout to order some Ordens for my 2nd gen gs... came up with 19x9 +10 , 19x10 +17 the car is on air.. do u guys think thatll be pretty flush? probally would jsut need a roll?
That sounds like it will be fine to me. Your most deff gonna need to roll in the rear
yeah that should fit pretty good. Run a 235/35 in the rear and you'll only need a slight shave in the rear.
I think you can go a few mm lower all around. Sounds pretty good though.
chrispy;314157 wrote:I think you can go a few mm lower all around. Sounds pretty good though.
[QUOTE=chrispy;314157]I think you can go a few mm lower all around. Sounds pretty good though.[/QUOTE] what were you suggestion, im buying new so i wanna make sure everythings right
^^^He meant go more aggressive on the offsets
pretty close to the one i have 4 sale on this forum
Mattbeeezy;314222 wrote:^^^He meant go more aggressive on the offsets
REV-01;314224 wrote:pretty close to the one i have 4 sale on this forum
[QUOTE=Mattbeeezy;314222]^^^He meant go more aggressive on the offsets[/QUOTE] yeah i know that, but i was wondering what he had in mind regaridng the offset [QUOTE=REV-01;314224]pretty close to the one i have 4 sale on this forum[/QUOTE] yeahh only if urs were polished
do +10 all around thats what i had on my 2gs before i sold it
Mattbeeezy;314346 wrote:do +10 all around thats what i had on my 2gs before i sold it
[QUOTE=Mattbeeezy;314346]do +10 all around thats what i had on my 2gs before i sold it[/QUOTE] got any pics?
Mattbeeezy;314346 wrote:do +10 all around thats what i had on my 2gs before i sold it
[QUOTE=Mattbeeezy;314346]do +10 all around thats what i had on my 2gs before i sold it[/QUOTE] I like this! :biggthumpup:
LiLS;314380 wrote:got any pics?
[QUOTE=LiLS;314380]got any pics?[/QUOTE] I dont right now since I'm at work but heres some pics I found on rimtuck.com fits perfectly. 19x9 +10 19x10 +10 [URL]http://rimtuck.com/photos.php?photo=1227467530.jpg&id=168&h=2[/URL] [URL]http://rimtuck.com/photos.php?photo=1227467545.jpg&id=168&h=3[/URL]
wow ive seen that car very niceee.... is it jsut tucked in cuase ur dumpt to the ground? what if i kept the +17 and went 10.5?
Did you check if that's available? I thought leons went by a chart and you can't choose a custom offset? Maybe Im wrong. 10 +20 on my ls was not flush by a long shot when aired down, but I think the ls can handle a lower offset wheel than a gs so maybe you'll be ok. +10 sounds better though.
Yeap. I don't even see the size you posted on the chart so you may want to double check. I do see 19x9 +6 low disk and 19x10 +6 low disk as well. I see a 19x10.5 +13 which should sit close enough to a 19x10 +10
thanks to jeebus! ive finally found the specs ima go with, what do you guys think? 19x9.5 +12 and 19x10.5 +13 also can i do low disk all around or i heard it wont clear my brakes?
have the shop who you are going with figure out for you...don't make it easy for them...shit every sets of wheels i do i gotta figure their bbk or stock brakes. alignment settings, type of fender mod, their ride height, what brand of tire to stretch etc.
REV-01;315244 wrote:have the shop who you are going with figure out for you...don't make it easy for them...shit every sets of wheels i do i gotta figure their bbk or stock brakes. alignment settings, type of fender mod, their ride height, what brand of tire to stretch etc.
[QUOTE=REV-01;315244]have the shop who you are going with figure out for you...don't make it easy for them...shit every sets of wheels i do i gotta figure their bbk or stock brakes. alignment settings, type of fender mod, their ride height, what brand of tire to stretch etc.[/QUOTE] i was gonna go with pgmotoring, hmm ill ask them
well i talked to some1 and looks like i gott ago with standard disk upfront and low disk up back to fit it but my offsets should be good
Your gonna need to roll the fronts and shave a lil off the rear and you can adjust camber acordingly to be flush
