Thread #21420

My DEBUT in VSC --- PICTURES few phases

27 archived posts · 3,277 historical views

dubyGS3April 18, 2010
#314812

My DEBUT in VSC --- PICTURES few phases

Hello,

I've been a member on VSC for awhile now. (near a year now) My car has been in different phases...
For those of you clublexus members... You probably seen these already.

this was during the summer of last year.
-simple drop with Tein SS
Forum image



Then... got small stuff - chrome trunk bar and handles. I was switching from LEDs tails to 01+ taillights a lot. I couldn't make up my mind.
no pictures of that...


Here's another phase... this past winter
new set of rims, VIP Modular VR05 with custom finishing 20x8.5 - 20x10 (don't remember offsets). In this picture i haven't shave/rolled my fenders yet. SO couldn't drop it so much. with stretch tires.
Forum image
Forum image
Forum image

and about last month i got some new toys in
-R1 concept hooked me up with a new set of rotors for free.
Got some new insurance LEDs taillights (love it)
Forum image
Forum image


Few weeks ago, I had to let go of my suspensions to get UAS air bags in.

Car is currently on jacks (3/24/10-4/17/10 current) Took some time to get the suspensions but i got it now.
Forum image



By next week 4/24/10 my car would be sitting on UAS bags :dance: finally!

I will post more of you guys that are interested... :runcoold:
View original BBCode
Hello,

I've been a member on VSC for awhile now. (near a year now) My car has been in different phases...
For those of you clublexus members... You probably seen these already. 

this was during the summer of last year.
-simple drop with Tein SS 
[img]http://i2.photobucket.com/albums/y16/youngzter/CLUB%20LEXUS/photo.jpg[/img]



Then... got small stuff - chrome trunk bar and handles. I was switching from LEDs tails to 01+ taillights a lot. I couldn't make up my mind.
no pictures of that... 


Here's another phase... this past winter 
new set of rims, [B]VIP Modular VR05 with custom finishing[/B] 20x8.5 - 20x10 (don't remember offsets). In this picture i haven't shave/rolled my fenders yet. SO couldn't drop it so much. with stretch tires.
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8806.jpg[/IMG]
[img]http://i2.photobucket.com/albums/y16/youngzter/IMG_9136.jpg[/img]
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_9139.jpg[/IMG]

and about last month  i got some new toys in
-R1 concept hooked me up with a new set of rotors for free. 
Got some new insurance LEDs taillights (love it) 
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8808.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8810.jpg[/IMG]


Few weeks ago, I had to let go of my suspensions to get UAS air bags in.

Car is currently on jacks (3/24/10-4/17/10 current) Took some time to get the suspensions but i got it now. 
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8803.jpg[/IMG]



By next week 4/24/10 my car would be sitting on UAS bags :dance: finally!

I will post more of you guys that are interested... :runcoold:
romeo291April 18, 2010
#314817
Dope dude! How did you get free rotors from R1? Looking forward to seeing it laid out.
View original BBCode
Dope dude!  How did you get free rotors from R1?  Looking forward to seeing it laid out.
JN.FYCApril 18, 2010
#314818
nice a local, i'm excited to see how this is gonna turn out. Hopefully i'll see your cruisin around town.
View original BBCode
nice a local, i'm excited to see how this is gonna turn out. Hopefully i'll see your cruisin around town.
nokcy21April 18, 2010
#314916
thats gonna look sick with the bags... good job
View original BBCode
thats gonna look sick with the bags... good job
d1deuceApril 18, 2010
#314918
Lookin good so far!! Wanna see it when the bags are on!!
View original BBCode
Lookin good so far!!  Wanna see it when the bags are on!!
MR.JApril 19, 2010
#314964
looks good!

keep it up.
View original BBCode
looks good!
 
keep it up.
dubyGS3April 19, 2010
#314979
romeo291;314817 wrote:Dope dude! How did you get free rotors from R1? Looking forward to seeing it laid out.


A homie of mine knows the owners and stoptech too. so they hook me up with tihs and in the future i will be getting a BBK from them.

bOosty.ViP;314818 wrote:nice a local, i'm excited to see how this is gonna turn out. Hopefully i'll see your cruisin around town.


yea, trying to get my car done by this upcoming weekend so i can cruise around.



thanks i will be posting more pictures soon.
View original BBCode
[QUOTE=romeo291;314817]Dope dude!  How did you get free rotors from R1?  Looking forward to seeing it laid out.[/QUOTE]

A homie of mine knows the owners and stoptech too. so they hook me up with tihs and in the future i will be getting a BBK from them. 

[QUOTE=bOosty.ViP;314818]nice a local, i'm excited to see how this is gonna turn out. Hopefully i'll see your cruisin around town.[/QUOTE]

yea, trying to get my car done by this upcoming weekend so i can cruise around.



thanks i will be posting more pictures soon.
JunctionVIPApril 19, 2010
#315064
Let's see those bags!
View original BBCode
Let's see those bags!
LiLSApril 20, 2010
#315317
whered u get the insurance tails bro?
View original BBCode
whered u get the insurance tails bro?
LudeNsolApril 27, 2010
#316880
Any updates??
View original BBCode
Any updates??
Bippu InsanityApril 28, 2010
#317151
Looking clean. Pics of it dumped on UAS?
View original BBCode
Looking clean. Pics of it dumped on UAS?
shanebApril 28, 2010
#317156
In it for the finished product so to speak. :biggthumpup:
View original BBCode
In it for the finished product so to speak. :biggthumpup:
aristo93April 28, 2010
#317161
nice! any updates with the sus?
View original BBCode
nice! any updates with the sus?
SmittyApril 28, 2010
#317177
Very nice start. After you get the suspension done its gonna look crazy hot.


-Smitty
View original BBCode
Very nice start. After you get the suspension done its gonna look crazy hot.


-Smitty
dubyGS3April 28, 2010
#317183
Forum image

here's a picture of the tank and compressor.

i will get the setup done by this week! Hopefully all goes well... i'm switching from 1/4 lines to 3/8. I want a slower lift...

sorry for the delay.... STAY TUNE till this weekend...
View original BBCode
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8883.jpg[/IMG]

here's a picture of the tank and compressor.

i will get the setup done by this week! Hopefully all goes well... i'm switching from 1/4 lines to 3/8. I want a slower lift...

sorry for the delay.... STAY TUNE till this weekend...
squadoneY33April 28, 2010
#317189
any updated pics and how long did it take you to install the air setup
View original BBCode
any updated pics and how long did it take you to install the air setup
Gravity430April 28, 2010
#317237
looking good so far. are you doing this on your own time?
View original BBCode
looking good so far. are you doing this on your own time?
dubyGS3April 28, 2010
#317260
yea, i'm doing this on my own time... been busy with work and this week i'm finally taking some time away from work so i can work on the air suspensions...

I miss driving it..

i'll take some pictures later on tonight. The inside of my car is stripped...
View original BBCode
yea, i'm doing this on my own time... been busy with work and this week i'm finally taking some time away from work so i can work on the air suspensions...

I miss driving it.. 

i'll take some pictures later on tonight. The inside of my car is stripped...
carlosApril 28, 2010
#317281
wouldn't 3/8 be faster than 1/4?
View original BBCode
wouldn't 3/8 be faster than 1/4?
KNEXXApril 30, 2010
#317740
Ur execution is on point so far...:biggthumpup:
View original BBCode
Ur execution is on point so far...:biggthumpup:
MR.JApril 30, 2010
#317759
agreed.
View original BBCode
agreed.
ALEXTHESUS*PECTApril 30, 2010
#317840
came to see the air setup.......

car is coming along!
View original BBCode
came to see the air setup.......

car is coming along!
LiCelsiorApril 30, 2010
#317875
always loved this car..dope!
View original BBCode
always loved this car..dope!
dubyGS3May 3, 2010
#318178
Forum image

Forum image

Forum image

Forum image

Forum image

Forum image



well here it is... its finished.... AND, my battery died. IT was an optima battery too. bad new for that. I'm going to get a new battery tomorrow and some spacers to make the wheels and everything flush.

I know the wood piece kind of killed it, but i was such in a rush to get it done so it put it on top of the rug. i'm going put it under the rug eventually.


there's some few things i still need to do. i'll post more within a few days.

-double din deck eclipse avn5500 [need to install]
-SUPRA TT BBK [need to install]
-R1 concept rotors [need to install]
-roof spoiler
-REPAINT surprise color
-Aristo interior
-Aimgain Muffler Tips
-new set of rims.... in-searching for a new set of rims at the moment. thinkin about VIP-Modular VR01
-some more work... will show them soon =]
View original BBCode
[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8885.jpg[/IMG]

[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8886.jpg[/IMG]

[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8915.jpg[/IMG]

[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8917.jpg[/IMG]

[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8919.jpg[/IMG]

[IMG]http://i2.photobucket.com/albums/y16/youngzter/IMG_8918.jpg[/IMG]



well here it is... its finished.... AND, my battery died. IT was an optima battery too. bad new for that. I'm going to get a new battery tomorrow and some spacers to make the wheels and everything flush.

I know the wood piece kind of killed it, but i was such in a rush to get it done so it put it on top of the rug. i'm going put it under the rug eventually. 


there's some few things i still need to do. i'll post more within a few days.

-double din deck eclipse avn5500 [need to install]
-SUPRA TT BBK [need to install]
-R1 concept rotors [need to install]
-roof spoiler
-[B]REPAINT surprise color[/B]
-Aristo interior
-Aimgain Muffler Tips
-new set of rims.... in-searching for a new set of rims at the moment. thinkin about VIP-Modular VR01
-some more work... will show them soon =]
5t341tHMay 3, 2010
#318186
install looks clean. i hope to get air soon. can i ask how much u spent on the kit?
View original BBCode
install looks clean. i hope to get air soon. can i ask how much u spent on the kit?
dubyGS3June 1, 2010
#324446
PM me... i'll give you the details and cost.


i got everything installed and done.


now, just waiting for spacers and smaller front tires...

i'll post pictures up soon.


next is paint job and maybe tte lip along with it.
View original BBCode
PM me... i'll give you the details and cost. 


i got everything installed and done. 


now, just waiting for spacers and smaller front tires... 

i'll post pictures up soon.


next is paint job and maybe tte lip along with it.