TCR 10 Previa offsets?

I guess this goes out to people with Previa's or the knowledge of what is the most "LIP" I can get and at what "offset" as well as what kind of "disk". I am looking for specs for 19 inch wheels. Thanks ahead of time.

Sukoshiyoshi

Hey Previa specialists...where you guys at?

Sukoshiyoshi

Hmm I think this has been covered many times before... 
depending on what wheels you get, expect no more than 2.5-3" MAX lip for a wheel that will actually fit well under the stock fenders. that's why it might actually be better in some cases to find a nice 1pc dished face wheel 

[quote=One Ton VIP]
it might actually be better in some cases to find a nice 1pc dished face wheel 
[/quote]

Thats the in thing right now even w/ the VIPcars.......... 5-7 yrs ago it was Carlsson and Wald now its the newer improved they LQQK HOT!!

Thanks for the replies.......actually don't mind doing some fender work.  Because stock fitment doesn't quite have enough lip for my liking.  I do believe that the 19 x 9 + 25 will give me a 3 inch lip all around.  19 x 9 (3 inch) and 19 x 10 (4 inch).  I would be satisfied with that kind of lippage.  Nothing against full faced design.....but for me I perfer a little lip instead.

Who ever picked up Shawnthemonster's old set.....can you post up with the specs? 

Sukoshiyoshi

full-faced wheels look great on the previa. why dont u just PM shawn about the specs? its easier that way. :D

I have the exact same wheels and fitment and i figured you might be interested in them. :) PM me. 

[img]http://static.flickr.com/96/250817889_22fd997068_b.jpg[/img]

SSR Kreis
18x9-10 +25

"Quote" why dont u just PM shawn about the specs? its easier that way.

I did....he said that he don't remember.  I am hoping that the guy who picked them up from him is on the boards and he can post up the info.  It never hurts to try right?  I figure I might just get lucky!

Sukoshiyoshi

bBOXD,

PM sent!  Disregard my 19's question.  I really got to improve my reading skills!  LOL  Forgot to ask in the PM what kind of rubber you running as well as the "weight rating". Also how much lip you got?

Sukoshiyoshi

I believe shawn's old set of SSR are 18x9 and 18x10 and the offset is like 25mm which stuck out the stock fender..

I have 17x8 and 17x9 with 38mm offset and the fronts just sticks out a little and the rears sticks out by like 0.5 inch. I have 235/45/17 tires all around. Oh, btw..I have a previa myself! :)

I kinda want to get bigger wheels..like 18's or 19's!

Yes Shawn's old wheels did stick out of the stock fenders.......but it was only by a little. With the offset that he was running all you would have to do is a minor pull and stretch and you can still get away with not having to get that "extended" sliding door hinge. I myself am looking to get a set of 19's as well. I currently am running on 18's(generic pieces of S^%$) and in the future "if" I do get around to a aero kit the 18's will scrape the S&^% out of the kit. With 19's I figure it should give me more clearance. 19 X 9 and 19 X 10 would be sweet. Or even a 19 X 9 +25 all around would be fine with me. Staggard set up is nice but if I went all around 19 X 9 I could get the most out of my tires by rotating. Yes, I can hear it now, "VIP on a budget...you can't do it" I agree but figure I'd just get the most bang for the buck. Plus have seen many VIP WAGON/TREND WAGON issues and the 19 X 9 + 25 set up all around looks very nice. That's just me though.......

Sukoshiyoshi

I was looking at this auction...but man! no money to even pay for it. I kinda wish I can sell the set I have right now and then get these..

If I didnt have a set yet, I would get these...these are my fav vip wheels!

[url]http://page8.auctions.yahoo.co.jp/jp/auction/h38535360[/url]

[quote=sukoshiyoshi ]
 Yes, I can hear it now, "VIP on a budget...you can't do it" I agree but figure I'd just get the most bang for the buck. 

Sukoshiyoshi
[/quote]

It can be done..My wagon is built on a budget the way I LIKE IT.. Screw what everyone says..Build what you like and not what others like..Hope your wagon turns out great..Good luck...

^^^^^Thanks for the luck......I'm going to need all the luck I can get! Figure I best do it while I can(actually I can't , shouldn't)......because in the near future I want to start investing in a House and "slow" down the modding.

Sukoshiyoshi

[quote=hondaboi ]
I believe shawn's old set of SSR are 18x9 and 18x10 and the offset is like 25mm which stuck out the stock fender..

[/quote]

they had an offset of +24...get 19's they look better on the previa's

[quote=shawnthemonster ]
they had an offset of +24...get 19's they look better on the previa's
[/quote]

kinda steering away..topic! but have you decided on which tires your gonna get?

THey actually had 19's on Japan Yahoo Auctions, for SSR Keris (same ones as what you had before), but too bad I had no funds to get it!!

Thanks for the heads up guys! I really appreciate it! But I found some "shoes" that I have always wanted. Hopefully all goes well and Robert can secure the deal for me. I will post pics if and when the deal is done. Much thanks to Robert........he is a great guy to deal with.....and he has a lot of patience! I suck on the computer.....he is walking through the steps. LOL It's like teaching an OLD dog new tricks! Hope that I didn't jump the gun.....I still have my WORK S2H's still for sale. LOL Its all good though....this is a set that I have always wanted.....figure best jump on it before I miss the opportunity.

Sukoshiyoshi