Interior Ideas!Help!

So v4.0 soon to come - i think i have a good grasp on the exterior - It's  time for me to think interior - My leather is great so im certainly going to do inserts with custom wood grain to match.

Anyone know some good sites to check out fabrics - I'm going for a clean look

I like the ostritch baby bird merlo - its almost black but all the wrinkles and ridges are red.  I'm going for  blended look or  preforated checkered or black red LV damier.  Where can I find or order custom fabrics.


Help?

I'll have to go back and check into the sites I got mine from.

midwestfabrics
miamicorp
jacobsupholstery

Most of the places we go to are local shops or are ordered from Japan. Wife likes certain fabrics from Japanese shops.

You're in the military I would have thought you had this part on lock?? HA

yeah, no trips to korea this year

urbansell.com for the LV/Gucci/Ect... quality is really good.  I bought some burberry to do my buddies car and it was so-so so we didn't use it.  Got some samples a while ago from them of their new stuff and its really good quality.

Wow nice find there GP. Will have to show that to the wife.

i found that website last night - thanks sam - whats been up dude?

^ Riding the crazy cluster fuck wave of life.  Poke around that Urbansell site.  Get some samples if you can.  The fabric is much nicer then you think.  May want to stray from ostrich in a Y33, Burgy has that on lock ;)

yeah i was thinking about that black and gray LV damier vinyl for the inserts, tastefully used of course and get diptech to do me some black on black checkered on everything thats wood grain - like it will look black until a certain light hits it and then ill get all the mats done in that black on black LV  damier fabric - i think it will be suttle enough because the seats are black  - the interior of cars in japan dont even match the  exterior - and of course abc pillars will be straight black but the headligner will be just an insert so it does not look gaudy

dont steal my idea you thieves

[QUOTE=33flavors;333197]dont steal my idea you thieves[/QUOTE] :smiley-rofl:

The idea of a custom interior on here is neck pillows and a set of curtains :runcoold:

[QUOTE=Green Poupon;333202]:smiley-rofl:
 
The idea of a custom interior on here is neck pillows and a set of curtains :runcoold:[/QUOTE]
 
 
Sam...be nice everyone has to learn somehow:smiley-rofl:.  I'll have to start putting together a build thread.
 
 
While we are on the topic, anyone know where I can get a single serve  Pod coffee machine that runs on 12V ???  Prefer stainless and black but all blk if fine too

Haha thread jack!

Hey some of us are trying to step our custom interior game up.

ha ha, well mine is in the making unless you can get you car in for interior this week - ill beat you to it

[QUOTE=burgy;333217]Sam...be nice everyone has to learn somehow:smiley-rofl:.  I'll have to start putting together a build thread.[/QUOTE]

Haha i'm just joking (eh sorta) I guess i'm one to talk my car looks like junk I gotta get on that one of these days :pat:

Here's your coffee maker:

[url]http://www.amazon.com/Cafe-Coffee-Maker-Lighter-Adapter/dp/B003IZ40QO[/url]

Not a pod system, but since they don't make them, that may work!  Wonder if it comes in black or stainless?

[QUOTE=33flavors;333514]ha ha, well mine is in the making unless you can get you car in for interior this week - ill beat you to it[/QUOTE]


Well definitely won't be as baller as yours since it's a DIY project but at least it will be different.

Ball till you fall is the way to go

I have a Q45 as well, and I've been thinking about getting all the woodgrain wrapped with a 3M vinyl.  3M has all that woodgrain vinyl, and the grey with black grain really pops out at me.  
 
Perforated leather looks really nice, IMO.

^^^

I'm really interested in that. Would love to wrap my aluminum pieces in wood grain.


Don't mean to thread jack but it's pretty relevant to this. Anyone know where I can find mink fabric? Wanna wrap my headliner in it. Would it even work you guys think?

Mink seems like it would be too heavy for Headliner. But I am no headliner expert.

There are ways around that but you have to be creative.  My headliner is way heavier than that...you'll all have to wait and see though.

burgy - stop teasing and post - i wanna see it

haha, Sam and I have to finish a few things at the begining of next month ( I have family in town from out of state so it's on hold again)  Once we get those done I will start to share.  There are a few finishing projects to it that will come secondary but I will share once we have the the first round complete.

[QUOTE=Damicci;333750]Mink seems like it would be too heavy for Headliner. But I am no headliner expert.[/QUOTE]

Nothing is too heavy for a headliner.  It's all in how you fasten it and how you do it (the way it looks in the end aka what goes where.)

If its waterproof vinyl you can lay the contact cement heavy on both sides and they will stick together.

[QUOTE=xseveredveganx;333660]I have a Q45 as well, and I've been thinking about getting all the woodgrain wrapped with a 3M vinyl. 3M has all that woodgrain vinyl, and the grey with black grain really pops out at me. 
 
Perforated leather looks really nice, IMO.[/QUOTE]
 
Where did u find that gray with black vinyl woodgrain? I have been looking for months!

[QUOTE=Green Poupon;334689]Nothing is too heavy for a headliner.  It's all in how you fasten it and how you do it (the way it looks in the end aka what goes where.)

If its waterproof vinyl you can lay the contact cement heavy on both sides and they will stick together.[/QUOTE]

Felt to drop by in this thread being that i'm revamping my interior completely.

GP remember the method we talked about fastening the vinyl to the headliner via buttons then do a 'quilted' pattern with thin silver chain? That worked nice. Unfortunately it was not what I was looking for and tore it down again. :pat:

I do have to say that indeed, material weight is a 'speed bump'when it comes down to what you really want and to match the picture in your mind. I had to compromise the look i wanted with the fastening method I had to go through (buttons) and even though it didn't look bad AT ALL, it was not what I was looking for.

Looking for nice red fabric for my seats and inserts....

Stop thread Jacking!!!!!

J, if you have or can get / borrow the 2009 July VIP Style, from page 213 to 229, it's nothing but interiors close ups, one after the other, some really nice ideas to take inspiration from.

most materials will be too heavy to do the headliner...it might last for a little while but over time it will separate from the headliner itself...

Here you go...sample time. Garson Vega material

[IMG]http://i870.photobucket.com/albums/ab269/jdmra1/Garson%20Luxury/185dafd4.jpg[/IMG]

[IMG]http://i870.photobucket.com/albums/ab269/jdmra1/Garson%20Luxury/cd3ba010.jpg[/IMG]

And my sub box done: to match all of my interior trim (in progress)

[IMG]http://i870.photobucket.com/albums/ab269/jdmra1/New%20Pics/706cd361.jpg[/IMG]

That sub box is whack as hell.




You should give it to me..........=)

[QUOTE=Infinitedrift03;335119]Where did u find that gray with black vinyl woodgrain? I have been looking for months![/QUOTE]
It's a 3M product. They make a dry carbon fiber vinyl in the same product line.

[QUOTE=Damicci;336384]That sub box is whack as hell.

You should give it to me..........=)[/QUOTE]


Took a long minute to build as well...make it worth the while :)

just throwin it out there but I have a xa and love the interior look of the 300c.  I have a kid so I don't want to go gucci stuff or anything crazy so I'm designing the interior of my xa to look like the 300.  Got the beige leather, tv and painting half the dash and accents are next.  That's prob it for my xa and it's not too expensive.  Just a thought for you.  See a OE style int you like and copy it.  It's pretty easy, cheap and a good way to not stay stock.

finally narrowed down my idea for interior - i pray that it comes out how i want it 2

If it comes out half as sick as we talked about your car needs be seen in Japan....

yeah i called and woke you up

It's all good man!  anytime I can help.  I will have a few pics for you soon.  we finished up about 90% of the headliner and got all of the grey plastic piece painted black. Clear goes on em tomorrow an dit all goes in the car.  The seats are partially sewn already an dteh visors are over half way done....too much going on to explain. I'll send you pics

33flavors,

If you are DIYing this project and need any help regarding execution, I'd be happy to offer any advice as I have plenty of experience doing custom interior stuff.