525iT_FeenAugust 27, 2010
#34010019x10 19x11 Schmidt VN-line.
I realize this is a bit different then most wheels listed here but I have yet to see a Japanese car on schmidts (unless it was a civic or integra on 16s) to date. I'd love to see it done and i'd love to see these gone.Price:
$1700 Firm
My VN-lines are up for sale but this time they need a little TLC. I picked these up again for $2500 and one of the barrels on the weld let go. The plan was to go 10.5 in front and 12 in back but instead I have scraped the wheels project to go with 20s. I had them on my 7 series for about 3 weeks before I took them off, removed the tires, and laid them in my basement. Now its time to sell.
The Bad:
- The 2 front barrels were cracked. The barrels need to be replaced. I can help you order the new barells from Schmidt in Germany for $650 shipped.
- One wheel has a scratch on the face from the tire shop hitting it with the air tool. It didn't bother me because I'm not a perfectionist but to be perfect the spot would need to be sanded down and touched up.
- One rear wheel has a tiny bend in it. All wheels balance out but it takes alot of weight in front due to the barrels. I did have them balanced perfectly and drove over 3k miles on them with no shakes. The bend is so small I couldn't even manage to take a picture of it but I like to be honest in my for sale ads.
The Good:
- For way less then half of what theses wheels cost new someone can have an amazing set of wheels. They fit e39s with a front fender pull and roll all around, e39 m5s with no body work, and e38s with zero body work. They require a 15mm to 17mm spacer to clear the front coilovers (If your on stock suspension I don't know what they require.
I really love these wheels but have an opportunity to do something very different so I'm going to have to get rid of them.
Offsets:
19x10 - ET10
19x11 - ET15
Centerbore is 74.1
Unedited pictures of how they look today:
http://photos.tobinhosting.com/ericstolz/album324/vnlines/
---------------------------------------------------------------------------------------
Picture on my e38:
Pictures from my e39:
Fitment pics on e39:
View original BBCode
I realize this is a bit different then most wheels listed here but I have yet to see a Japanese car on schmidts (unless it was a civic or integra on 16s) to date. I'd love to see it done and i'd love to see these gone. [SIZE="5"][COLOR="Red"]Price:[/COLOR] $1700 Firm [/SIZE] My VN-lines are up for sale but this time they need a little TLC. I picked these up again for $2500 and one of the barrels on the weld let go. The plan was to go 10.5 in front and 12 in back but instead I have scraped the wheels project to go with 20s. I had them on my 7 series for about 3 weeks before I took them off, removed the tires, and laid them in my basement. Now its time to sell. [COLOR="red"]The Bad:[/COLOR] - The 2 front barrels were cracked. The barrels need to be replaced. I can help you order the new barells from Schmidt in Germany for $650 shipped. - One wheel has a scratch on the face from the tire shop hitting it with the air tool. It didn't bother me because I'm not a perfectionist but to be perfect the spot would need to be sanded down and touched up. - One rear wheel has a tiny bend in it. All wheels balance out but it takes alot of weight in front due to the barrels. I did have them balanced perfectly and drove over 3k miles on them with no shakes. The bend is so small I couldn't even manage to take a picture of it but I like to be honest in my for sale ads. [COLOR="red"]The Good:[/COLOR] - For way less then half of what theses wheels cost new someone can have an amazing set of wheels. They fit e39s with a front fender pull and roll all around, e39 m5s with no body work, and e38s with zero body work. They require a 15mm to 17mm spacer to clear the front coilovers (If your on stock suspension I don't know what they require. I really love these wheels but have an opportunity to do something very different so I'm going to have to get rid of them. [COLOR="Red"]Offsets:[/COLOR] 19x10 - ET10 19x11 - ET15 Centerbore is 74.1 Unedited pictures of how they look today: [url]http://photos.tobinhosting.com/ericstolz/album324/vnlines/[/url] --------------------------------------------------------------------------------------- [COLOR="red"]Picture on my e38:[/COLOR] [IMG]http://www.2xdvisual.com/e38/SOUTHIE-BATCH/southie5.jpg[/IMG] [IMG]http://www.2xdvisual.com/e38/SOUTHIE-BATCH/southie4.jpg[/IMG] [IMG]http://www.2xdvisual.com/e38/SOUTHIE-BATCH/southie1.jpg[/IMG] [COLOR="red"]Pictures from my e39:[/COLOR] [IMG]http://photos-a.ak.fbcdn.net/photos-ak-sf2p/v140/206/121/74402616/n74402616_30417496_4082.jpg[/IMG] [IMG]http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v323/206/121/74402616/n74402616_30658708_3551.jpg[/IMG] [IMG]http://photos-c.ak.fbcdn.net/photos-ak-sf2p/v323/206/121/74402616/n74402616_30658722_5084.jpg[/IMG] [IMG]http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v323/206/121/74402616/n74402616_30658724_6355.jpg[/IMG] [COLOR="red"]Fitment pics on e39:[/COLOR] [IMG]http://photos-f.ak.fbcdn.net/photos-ak-sf2p/v323/206/121/74402616/n74402616_30658717_7026.jpg[/IMG] [IMG]http://photos-f.ak.fbcdn.net/photos-ak-sf2p/v323/206/121/74402616/n74402616_30658709_4162.jpg[/IMG] [IMG]http://photos-d.ak.fbcdn.net/photos-ak-sf2p/v323/206/121/74402616/n74402616_30658723_5729.jpg[/IMG]