Intro plus Bonneville?
Hey guys, I've been a lurker for a while and I figured I would introduce myself..
I don't own a VIP car, or anything close for that matter, but I really like the styling VIP brings.
A little over a year ago I got to go to Japan and it was just awesome seeing all the slammed properly stanced cars over there. That, and I flat out fell in love with the Y32 Gloria..
Here's my DD/project car I've been toying with for the past few years, a 1995 Pontiac Bonneville.. The goal if this is just to be subtle, clean, and proper.
Basic info: Black Onyx 202, molded in E39 headlights, Super RS', homemade front coilovers, air-assist in the rear.
Working on: trunk spoiler, front lip, puddle lights, and LED tails.
Let me know what you guys think.
View original BBCode
Hey guys, I've been a lurker for a while and I figured I would introduce myself..
I don't own a VIP car, or anything close for that matter, but I really like the styling VIP brings.
A little over a year ago I got to go to Japan and it was just awesome seeing all the slammed properly stanced cars over there. That, and I flat out fell in love with the Y32 Gloria..
Here's my DD/project car I've been toying with for the past few years, a 1995 Pontiac Bonneville.. The goal if this is just to be subtle, clean, and proper.
[IMG]http://lh3.ggpht.com/_j26UOMifp74/TB0zG702ayI/AAAAAAAAIDQ/COkxYW6a63c/s800/IMG_2419.JPG[/IMG]
[IMG]http://lh3.ggpht.com/_j26UOMifp74/TAG90aIUw4I/AAAAAAAAH18/1RAhFVGlLqk/s800/IMG_4234.JPG[/IMG]
[IMG]http://lh4.ggpht.com/_j26UOMifp74/THqXLPYhBfI/AAAAAAAAJPA/lyAmFuZ-xmY/s800/IMG_4896.JPG[/IMG]
[IMG]http://lh5.ggpht.com/_j26UOMifp74/THqXdTxN_SI/AAAAAAAAJPs/wHceE5NAk90/s800/IMG_4907.JPG[/IMG]
[IMG]http://lh5.ggpht.com/_j26UOMifp74/TF9LrbyQBEI/AAAAAAAAI7c/I3cUQ22lbGg/s800/IMG_4736.JPG[/IMG]
[IMG]http://lh6.ggpht.com/_j26UOMifp74/TBWELqQGweI/AAAAAAAAH8Q/bI8BuIiaddk/s800/IMG_4319.JPG[/IMG]
Basic info: Black Onyx 202, molded in E39 headlights, Super RS', homemade front coilovers, air-assist in the rear.
Working on: [URL="http://lh4.ggpht.com/_j26UOMifp74/TG7idj4_qiI/AAAAAAAAJFU/4iNnrh-fH4U/s800/IMG_4785.JPG"]trunk spoiler[/URL], [URL="http://lh4.ggpht.com/_j26UOMifp74/THlYVmwUABI/AAAAAAAAJMQ/IDEqjrKjPBI/s800/IMG_4856.JPG"]front lip[/URL], puddle lights, and LED tails.
Let me know what you guys think.
I think you did a real good job. Looks nice and should shock some of our members. Just go lower
View original BBCode
I think you did a real good job. Looks nice and should shock some of our members. Just go lower
I always liked that Bonneville and the one right before it, looks nice, like Agi suggested, just go a little lower and you're golden. Props.
View original BBCode
I always liked that Bonneville and the one right before it, looks nice, like Agi suggested, just go a little lower and you're golden. Props.
don't like the rear end, but everything else is proper!
View original BBCode
don't like the rear end, but everything else is proper!
Wow this bonneville is amazing, I agree with brain the rear is not my taste but it's the cars fault not yours. Props, if I saw this rolling I'd probably just stare for days =)
View original BBCode
Wow this bonneville is amazing, I agree with brain the rear is not my taste but it's the cars fault not yours. Props, if I saw this rolling I'd probably just stare for days =)
Coolest thing ive seen in a while.
View original BBCode
Coolest thing ive seen in a while.
Thanks guys.
Here's the front end and fitment when I bought it:
Here it is on my winter wheels with the front coilovers maxed out and some junk in the trunk :
I barely made it up the block like that though. It felt like I was driving on square wheels from the axles binding so bad.. And that's with my entire drivetrain raised up 1.5" already to help with that. Plus I can already bottom out my front struts to begin with.
I'll eventually get that low but I'm going to have to cut/weld the unibody above the front wheels, tub out the rear a little bit, longer front ball joints, find a short cartridge to gut and shorten my front strut with, etc. etc.
I guess there's not really much I can do with the rear. I'm hoping the window spoiler and LED tails will update it a bit. Do you guys have any suggestions?
View original BBCode
Thanks guys.
Here's the front end and fitment when I bought it:
[IMG]http://lh4.ggpht.com/_j26UOMifp74/SrrRqJJZAjI/AAAAAAAAENM/r3FzbAg6QG4/s800/1.JPG[/IMG][URL="http://lh4.ggpht.com/_j26UOMifp74/SrrRqJJZAjI/AAAAAAAAENM/r3FzbAg6QG4/s800/1.JPG"][/URL]
Here it is on my winter wheels with the front coilovers maxed out and some junk in the trunk :
[IMG]http://lh5.ggpht.com/_j26UOMifp74/S6ZMhhoEW2I/AAAAAAAAEro/B3nym-Ccc4k/s800/DSCN2561.JPG[/IMG]
I barely made it up the block like that though. It felt like I was driving on square wheels from the axles binding so bad.. And that's with my entire drivetrain raised up 1.5" already to help with that. Plus I can already bottom out my front struts to begin with.
I'll eventually get that low but I'm going to have to cut/weld the unibody above the front wheels, tub out the rear a little bit, longer front ball joints, find a short cartridge to gut and shorten my front strut with, etc. etc.
I guess there's not really much I can do with the rear. I'm hoping the window spoiler and LED tails will update it a bit. Do you guys have any suggestions?
I'm gonna add some width and camber come spring.
Just ordered another set of BBS Super RS' that are 18x9/10", and the lips are going to be chromed. Gonna do 245/45s up front, 275/40s in the rear, and add about a half a degree of camber all around. So, 1.5ish up front and 2 out back. Nothing real crazy but noticeable. ETs should be about 16mm up front and 24 out back. I would also like to notch my unibody rail up front and do a little surgery in the rear wheel wells to get lower without rubbing.
View original BBCode
I'm gonna add some width and camber come spring.
Just ordered another set of BBS Super RS' that are 18x9/10", and the lips are going to be chromed. Gonna do 245/45s up front, 275/40s in the rear, and add about a half a degree of camber all around. So, 1.5ish up front and 2 out back. Nothing real crazy but noticeable. ETs should be about 16mm up front and 24 out back. I would also like to notch my unibody rail up front and do a little surgery in the rear wheel wells to get lower without rubbing.
To be honest, I straight up groaned when I saw "Bonneville" because I was picturing some beige mommymobile (yeah, I know that's not fair, but hey..)
This is really nice man. I was a big fan of this car when I was a kid, yours looks refreshingly clean.
View original BBCode
To be honest, I straight up groaned when I saw "Bonneville" because I was picturing some beige mommymobile (yeah, I know that's not fair, but hey..)
This is really nice man. I was a big fan of this car when I was a kid, yours looks refreshingly clean.
Lol. Just imagine when I'm having a conversation about cars with someone I don't know and they ask what kind of car I drive/mod. Bonneville? Wtf?
I'm just glad other people like it when they see it.
View original BBCode
Lol. Just imagine when I'm having a conversation about cars with someone I don't know and they ask what kind of car I drive/mod. Bonneville? Wtf?
I'm just glad other people like it when they see it.
Looking through the pics first...then read the thread I kept thinking "that front looks like a 5 series!"
definitely not my grandmas bonneville!
View original BBCode
Looking through the pics first...then read the thread I kept thinking "that front looks like a 5 series!"
definitely not my grandmas bonneville!