Thread #23343

240sx coilover on a y33

Closed

7 archived posts · 1,227 historical views

khinelmooSeptember 27, 2010
#345637

240sx coilover on a y33

just wondering exactly what parts i need for my y33 if anybody could help me out thank you
View original BBCode
just wondering exactly what parts i need for  my y33 if anybody could help me out  thank you
cheez80September 27, 2010
#345648
there's an awesome thread in the suspension forum about this specific topic -- you'd do better if you searched next time. :)
View original BBCode
there's an awesome thread in the suspension forum about this specific topic -- you'd do better if you searched next time. :)
mad-assSeptember 27, 2010
#345652
if you really want to do this..

from S14...
front knuckles
ball joints x4[can not use Y33 Ball Joints on 240SX knuckles]
Rear Knuckles
J30 outter tie rods, so that you can bolt it on to Y33 inner tie rods and be able to bolt up to the 240SX knuckles. normal 240SX outter tie rods will not work on Y33 inner tie rods.

and I'd recommend you getting after market rear upper camber arms and rear toe rods and maybe rear traction rods.

and you'll loose your front sway bar as well.
View original BBCode
if you really want to do this..

from S14...
front knuckles
ball joints x4[can not use Y33 Ball Joints on 240SX knuckles]
Rear Knuckles
J30 outter tie rods, so that you can bolt it on to Y33 inner tie rods and be able to bolt up to the 240SX knuckles. normal 240SX outter tie rods will not work on Y33 inner tie rods.

and I'd recommend you getting after market rear upper camber arms and rear toe rods and maybe rear traction rods.

and you'll loose your front sway bar as well.
khinelmooSeptember 27, 2010
#345657
ok thank you guys
View original BBCode
ok thank you guys
xseveredveganxSeptember 28, 2010
#345828
I don't think you need the rear knuckles from a 240SX...
View original BBCode
I don't think you need the rear knuckles from a 240SX...
mad-assSeptember 29, 2010
#346055
I said rear knuckles because I don't know if the 240SX coilovers' bottom mount will be same size as Q45's.

I could have tried the 240SX rear shocks on Q45 knuckles but i didn't think to do that..but I do know that J30 rear shocks' bottom will mount to Q45's, so maybe it'll match up?

240's rear bottom mount's inner diameter is 20mm/0.79inches. on my calibrator reading.
View original BBCode
I said rear knuckles because I don't know if the 240SX coilovers' bottom mount will be same size as Q45's.

I could have tried the 240SX rear shocks on Q45 knuckles but i didn't think to do that..but I do know that J30 rear shocks' bottom will mount to Q45's, so maybe it'll match up?

240's rear bottom mount's inner diameter is 20mm/0.79inches. on my calibrator reading.