02 LS430: front camber question

Can you adjust the front camber to match the rear with stock parts or must you buy a specific camber part for the front in order to match front camber with rear?i I wont both rear and front to have camber and not sure how to achieve front camber. 

Thanks.

check out nagisa auto but $$$$$$$$$$$$$$$$$$$$$

I want  nagisa parts but soooooooo damn EXPENSIVE :sad::sad::sad::sad::sad:

[QUOTE=Dajap;346210]check out nagisa auto but $$$$$$$$$$$$$$$$$$$$$[/QUOTE]

I think he is the person who can give you full detail on nagisa and I'll be more than happy to get them for you :biggthumpup::biggthumpup:

jdm palace ill def be purchasing from you when the time comes. I wanted to know how far the front camber can be adjusted with the current stock parts.

It cant be. The stock arms are fixed and not adjustable. You can buy different length arms from Lexus but they adjustment is slim to none. You'll need the Nagisa arms, the same thing I am looking to get next but all 4 arms is going to run in the $2k plus range.

goddamn, 2k for some camber arms?  im sure you could go to a motorsports fab shop and have em design something custom for less at that point

[QUOTE=bWiLKINS;346513]It cant be. The stock arms are fixed and not adjustable. You can buy different length arms from Lexus but they adjustment is slim to none. You'll need the Nagisa arms, the same thing I am looking to get next but all 4 arms is going to run in the $2k plus range.[/QUOTE]

We are talking about the fronts right not the rear, because i know for a fact the fronts have an adjustment i just dont know how many degrees.

[QUOTE=BAHC;346538]goddamn, 2k for some camber arms?  im sure you could go to a motorsports fab shop and have em design something custom for less at that point[/QUOTE]

no way that is too cheap..

i spent at least 5 on the ls430 arms

Well, I'm sure you can always get them custom made. It might not be cheaper but it will be done correctly, but Nagisa Arms will run you a little under $5k for all 4 arms front and rear.

[QUOTE=BAHC;346538]goddamn, 2k for some camber arms? im sure you could go to a motorsports fab shop and have em design something custom for less at that point[/QUOTE]
 
Hahah welcome to owning a 430. I am sure these could be fabbed yourself as well if you have some experience but wou;d NOT suggest this being your first project. 
 
And I am sure you could have a shop do it for you but at the rate that most well expereinced fab shops will charge you, you'll only save a little bit of money anyway, plus the downtime of having the car's stock arms modified or leaving it at the shop torn apart so they have something to work with. I am sure that people buy the Nagisa arms for a reason.....

i should go buy these arms and have a fab copy them and sell them on the forums for half price id still make a killing

Man just use the gs spc adjustable ball joints. But will make the uca sit a little higher

[QUOTE=antbo;346687]Man just use the gs spc adjustable ball joints. But will make the uca sit a little higher[/QUOTE]

moar info!

^^go to ebay get the adjustable spc ball joint for the GS, get a ball joint press, press out the ball joint, press in the new one. im not 100 on this, but im pretty sure it will work. if you really want it, give it a try it dont hurt :shrug:. just buy one and try it

[QUOTE=biga27110;346680]i should go buy these arms and have a fab copy them and sell them on the forums for half price id still make a killing[/QUOTE]

say no to knock offs lol.

[QUOTE=REV-01;346801]say no to knock offs lol.[/QUOTE]

Its just a piece of metal, should be no difference.=)