r33 brakes

full set fronts been used, rear set not. so three calipers are a green color rotors pads and calipers, no lines sorry. can get you braided lines if you so desire. If i can find the paint, i will paint the fourth caliper.
650 firm

sorry this is the only pics i got right now 
[IMG]http://img.photobucket.com/albums/v223/DrifterXL01/s14%20build/SA400102.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v223/DrifterXL01/SA400086.jpg[/IMG]

bump

will this fit 96 Q45? price?

How many piston are they front and rear it might help your sale?
 
just an idea and you should be able to make them fit a Q it might require some custom brackets but it is most likely do-able
 
if nothing else heres a bump

im gonna go and guess 4piston front and 2 piston rear??? if i remember correctly z32-r33 are the same...had z32s on my s14.5

Yeah they will fit a Q cause Q brakes fit on 240s :D and yes 4piston front 2 rear these are bigger than z32 also. even rotor size.

Bump

interested in partial trades of 30mm Z set up plus cash??  what is the rotor size again?  I know I used to know all these by heart when I owned my s14.5...

haha, i will have to check the rotor size cause i dont know either :( pm me the offer

It will depend if these are R33 GTR or the regular R33 too I guess??  rotor size will should give me all the info I need to do the rest of the research.  Thanks

R33gts, the gtr ones are brembo.

gotcha..still gonna need the rotor size at this point.  Thanks.

i have to goto the shop to measure them but this is what i found
R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)

bump bump bump it up

same size as my rotors then...nice upgrade from stock but only a minor difference from what I currently have.  Thanks

k, i still have not gone to shop to measure them yet. but i know the rotors are bigger than z32, and the caliper is too.

cause i just pulled this up
R33 GTS-T (Type-M) This is a large sumutomo caliper with a 310mm rotor

bump

bump

must go.

Hi are the rotors warped at all or have they been resurfaced??? Where are you located??? Are the pads in good shape?? Thanks sorry for all the questions.

[QUOTE=Kouki Monster;350891]k, i still have not gone to shop to measure them yet. but i know the rotors are bigger than z32, and the caliper is too.

cause i just pulled this up
R33 GTS-T (Type-M) This is a large sumutomo caliper with a 310mm rotor[/QUOTE]

Turns out the stock  Q rotors are bigger than the Z32 rotors as well. When I first did this on my Q a few years back, I learned by trial and error. Ordered the Z32 rotors and after mounting it all up, the brake pads were off the edge of the rotors by almost 1/2".

[QUOTE=CJY33;377090]Hi are the rotors warped at all or have they been resurfaced??? Where are you located??? Are the pads in good shape?? Thanks sorry for all the questions.[/QUOTE]


haha no worries. the rotors are in great shape! they have been resurfaced with in the last 2 years but have been sitting around since then. they have a lil surface rust on them but do not need to be resurfaced cause of it. pads have 300 miles on them, and I am in washington

Oh ok sorry but I ended up buying some locally last night. I was inpatient :shrug:
Good luck with the sale though.

as most people are.

Damnit...I hadn't checked thi in awhile and didn't realize thesae are the larger ones that the R32GTS/300Z etc.....Now I want them again haha.  IF you have these in a few months still we may talk.  Direct bolt on to an S chassis with proper lines correct?

MONTHS!! this guy... haha yes they are a direct bolt on with 300zx lines

Not sure why that is funny since you have had them for sale for months already???

It is funny. And I probably will lol

Like I knew, i forgot about these haha so bump

bump

How wide are the calipers? Like would O disk (big lip) clear em?

hmm! That is a good question. They fit stock Skyline gts r33 wheels which are essentially s14 SE wheels

So how much for everything again??? I dont need the rear calipers.  But everything else??

you have the rear calipers as well as the rotors? or do you need just the front calipers and front rotors only?

Yeah I bought the whole setup a while back but all the rotors were so thin they couldnt even be resurfaced. So now I just need the rear rotors and front rotors, I have the calipers already. DAMN I made that way more confusing then it was. :pat:

Lol. I don't want seperate the rotors I can try and get you some new ones if you would like

So how much for just the front calipers pads and rotors?  I have conversion lines and the whole rear set up already.....Thanks

hmm.. I really dont want to separate them.. but 400 shipped.

Have we confirmed the size of the Rotors too?  From the pics they do look like R33GTs25-t but are they the Type-M that use the 310mm rotor or the others that use the 296mm rotor?  Thanks...

It could very well be Type M, but un sure. will measure. There was to many skyline clips to tell :shrug:

HAHA, understandable.  The 296 or 310mm sizes will obviously make a big difference.  Thanks

sold