Good source for Rivets/fasteners for 3p wheels?

I just broke down some wheels and sent the lips over to JDM palace to get repolished.

Some of the rivets that bolted the lip to the face need replacing.
Does anybody know of a good source for these?


They look just like these but they are not for work wheels

[img]http://i26.photobucket.com/albums/c105/jzz30tt/Photo%20Shoots/IMG_1434.jpg[/img]

If all else fails... [url]www.mcmaster.com[/url]
Or be like intro wheels and get some fasteners that look like they came from home depot >HAHA<

We get 150qty of 12pt 10mm or 12mm chrome bolts for $200. I do some dis/assembling from time to time. You can look up fasteners and bolts for metrics if you want to keep the metric feel :laugh:

[quote=memoryfab_dave ]
We get 150qty of 12pt 10mm or 12mm chrome bolts for $200. I do some dis/assembling from time to time. You can look up fasteners and bolts for metrics if you want to keep the metric feel :laugh:
[/quote]

hey do you have replacement ones for the work euroline dh's? i need some for my set :)

[quote=most_faded ]
hey do you have replacement ones for the work euroline dh's? i need some for my set :)
[/quote]

I don't know if it will be the same exact spec as euroline dh, you can always replace all the bolts for that particular wheel. I can only sell them by 150qty since they come in a box like that. Also make sure your DH isn't a welded 2 piece (americans still call them a 1pc). DHs are usually welded from my experience.

wooohoo..
i have vs-mx(vs series of work)..

how can i call u?

[quote=memoryfab_dave ]
We get 150qty of 12pt 10mm or 12mm chrome bolts for $200.  I do some dis/assembling from time to time.  You can look up fasteners and bolts for metrics if you want to keep the metric feel  :laugh:
[/quote]

I actually need 12pt 7mmx16 standard thread (1.0)
Can you get these?