19" 750li wheels on g50 questions

Hey everyone, 
Been lurking on n off since the wallet's been kinda thin lately but now am ready for the next step. I've seen folks like damicci run this setup a d was curious about the spacers. I read I  one thread that someone was using 16mm adapters but the lowest I can find right now is 20mm adapter for $180 for all 4. eBay has an adapter set for $120 but it's 1.25 inches thick. What are your thoughts. I've got a set of espilir lowering springs and want a decent camber but not overly aggressive. A point in the right direction would be great. Thanks for any help folks.

When I did this on my g50. I bought 25mm spacer and had them machined down to 16mm. The machine shop I took them to said 16mm is the safest thickness you can mil them down to. I don't think those springs are gonna be enough of a drop to flush your wheels. You might have some poke. 


[IMG]http://farm3.static.flickr.com/2796/4227140927_15448888cf_b.jpg[/IMG]

you're doing it wrong.

suspension before wheels. if for some reason you have the wheels beforehand, wait until you get your suspension dialed in.

thanks! I just sold the springs to a friend and am going to run a z32 setup in the meantime until I can pick up a nice set of coilovers. Probably going to start the install mid jan. thanks again.