Work Euroline

Hi, I am thinking about purchasing a used set of 19'' Work Euroline DH wheels locally. The owner had them powder coated black. I have a 03 M45 black/black. Would these wheels look good on it? Should I strip the black powder coat off? Want to get some opinions before i do anything. Thanks
 
[IMG]http://img820.imageshack.us/img820/6348/3nd3o63p15v55w65x2b486f.jpg[/IMG]

only if it's the jdm 3pcs.  most of the work dh is 2pc welded. it's a little harder to strip the wheels if it's 2pc welded. it will look ok but 19's a little small for the M45. are you going for all black look?

Why would you do everything black?  Person must of hated color

You have black on black M, I think it would look sick as is. And 19's are perfect for Y34's IMO.

[img]http://www.dressupbolts.com/wp-content/gallery/q45-build/sl-blackout.jpg[/img]


I have mixed feelings with these on my car. I've had them on for about a week now, but I can't decide if I like them or not.

[QUOTE=sessions-usa1;382378]only if it's the jdm 3pcs. most of the work dh is 2pc welded. it's a little harder to strip the wheels if it's 2pc welded. it will look ok but 19's a little small for the M45. are you going for all black look?[/QUOTE]
 
 
I'm not going for the all black look. I think a machined face and polished lip would be perfect. I just never seen one with all black before so i dont know how that would turn out. If i strip the wheel, can I use paint stripper?

I vote for a machined face with black lips.

[QUOTE=808_M45;382415]I'm not going for the all black look. I think a machined face and polished lip would be perfect. I just never seen one with all black before so i dont know how that would turn out. If i strip the wheel, can I use paint stripper?[/QUOTE]
 
where you planning doing it yourself?

[QUOTE=sessions-usa1;382428]where you planning doing it yourself?[/QUOTE]
 
 
If i can, I will. Anything I should know or should I let a shop do it?

if its truly powdercoated and not just sprayed on, then it's going to be damn near impossible to diy it off.

[QUOTE=808_M45;382430]If i can, I will. Anything I should know or should I let a shop do it?[/QUOTE]

i was just about to say what "brainneeded" said. you should ask the seller where is got it powdercoated?

why not go try and do a test fit..jack up the car and mount it on while it's up in the air..and see if u like it...this may give u a general idea...

Those DH's are the welded 2 piece version.

Im gonna pass on the wheels. dont like it black and dont want to deal with stripping the powder coat. Ill just wait to find better wheels.