Trying to fine tune my UAS set up

What's up guys? I'm finally trying to fine tune my ride quality and I was just wondering at what PSI do you guys run on your set ups and if your running megans coilovers what is your dampening at. I know it's different for all cars but I just want to do a comparison and see what others are doin. Thanks a lot guys

I ride at 120~psi front, 50psi rear or so. My bags in the front are pretty small...

How's the ride right now?  I'm going back and forth with you and Wes's setup OR the Glenn and the other guys with airforce.  I want to ride in both first though.

Good luck and hopefully you get it to were you like it!!

Im not on megans but Im uas. About 90 psi up front and 50 rear seems to be comfortable.

I'm about running the same PSI as jeebus, and mine rides comfy (on UAS)

The ride is okay but I haven't really played with any of my adjustments. I want to just smoothen out the ride. Thanks a lot guys for ur input cus I'm running 60 in the front n 90 I'm the rear I'm goin to try ur set up out thanks guys

Why would you have more psi in the rear? Your engine in the front = more weight.

I beleive if your on coils ride is more stiff.. 

Did you use the forjworks Brackets??? if you did we want pics of your car !

depends on where your bag is sitting on the coilover right? It seems to make sense that you would want the coilovers on a softer setting ....Try the street setting.  I think its like 15 and below.

[QUOTE=eight08customs;384755]I beleive if your on coils ride is more stiff.. 

Did you use the forjworks Brackets??? if you did we want pics of your car ![/QUOTE]

What r the forjworks brackets? Sorry Im not sure what they r.





Thanks everyone for r the help m info.

[QUOTE=Mr.R;385136]What r the forjworks brackets? Sorry Im not sure what they r.





Thanks everyone for r the help m info.[/QUOTE]

its the brackets used to mount UAS bags to coilovers.   the vendor Forjworks sell them on this forum

[url]http://www.forjworks.com/Air-Over-Threaded-Brackets-One-Set-Left-and-Right-P125.aspx[/url]

this is the threaded brackets we are making.. for the megans and tiens.. 

[IMG]http://www.forjworks.com/Assets/ProductImages/LargeImages_AirOverThreadedBrackets2.jpg[/IMG]

[QUOTE=Mr.R;385136]What r the forjworks brackets? Sorry Im not sure what they r.





Thanks everyone for r the help m info.[/QUOTE]

O okay yeah I kno what ur talking about I was thinking bout buy them but money is pretty tight right now but I do want them. Some day :)