Thread #2674
will 285/30 fit? orr...? any suggestions? i wanna do fk452s buttt i wanna make sure it will at least have a good chance of mounting before i buy them.
I had 275/35 on mine when i got them but the lip didnt seem to be seated properly. They were bald anyway so i replaced them with 295/35... It was still a decent stretch. [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/07-01-06_2007.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/07-01-06_2008.jpg[/IMG] From what i have seen, 5% down in profile seems to have a similar effect on stretch as 10mm down in width, so the 285/30 would be the same as the 275/35 i had. I think it will fit, albeit quite stretched.
so in thoes pics, is that the 275 or the 295
Thats the 295/35s... Bridgestone Eagle F1
wow charlie u really out did me been meaning to ask the specs on ur equips i have a pair of 18x10.5 -39 ill be runnin 235/40 i had a chnace to get some 18x13 +1 equips and a time but the tire size had to be SOOO huge, they weren't practical u plannin on pushin big power or are these ur street shine?
street rice haha even if i could burn the tires id be broke if i had to buy more than a pair every 6 months 18x13 -7 with 295/30 pirelli somethings, has about a half inch of room on the inside
battleaxe;37703 wrote:i have a pair of 18x10.5 -39 ill be runnin 235/40
i had a chnace to get some 18x13 +1 equips and a time but the tire size had to be SOOO huge, they weren't practical
[QUOTE=battleaxe;37703]i have a pair of 18x10.5 -39 ill be runnin 235/40 i had a chnace to get some 18x13 +1 equips and a time but the tire size had to be SOOO huge, they weren't practical[/QUOTE] What could you possibly run those sizes on?
NYC03Alti;37746 wrote:What could you possibly run those sizes on?
[QUOTE=NYC03Alti;37746]What could you possibly run those sizes on?[/QUOTE] Anything if you got the balls to do it.
a 240 *hides under a table*
Dominik;37040 wrote:I had 275/35 on mine when i got them but the lip didnt seem to be seated properly. They were bald anyway so i replaced them with 295/35... It was still a decent stretch.
From what i have seen, 5% down in profile seems to have a similar effect on stretch as 10mm down in width, so the 285/30 would be the same as the 275/35 i had. I think it will fit, albeit quite stretched.
[QUOTE=Dominik;37040]I had 275/35 on mine when i got them but the lip didnt seem to be seated properly. They were bald anyway so i replaced them with 295/35... It was still a decent stretch. [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/07-01-06_2007.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/07-01-06_2008.jpg[/IMG] From what i have seen, 5% down in profile seems to have a similar effect on stretch as 10mm down in width, so the 285/30 would be the same as the 275/35 i had. I think it will fit, albeit quite stretched.[/QUOTE] Where are those wheels at?
They look like Work equips.
nizzan4u2nv;37747 wrote:Anything if you got the balls to do it.
[QUOTE=nizzan4u2nv;37747]Anything if you got the balls to do it.[/QUOTE] Considering that 19x8.5 +33 is pretty damn flush on my L31 Altima, an 18x10.5 -39 or 18x13 +1 would need one helluva widebody.
nizzan4u2nv;37771 wrote:They look like Work equips.
[QUOTE=nizzan4u2nv;37771]They look like Work equips.[/QUOTE] i said where not what.;)
i have a s13 with a bn sports blister kit 70mm wide rears and 50mm fronts january im putting tires on my 18s i have lying around 18x10 -12 with a 215/40 18x10.5 -39 with a 235/40 then in spring time i should have found some retarded sized 14s for my cressida (mx73) and then fit those on happy new years everybody
chmercer;37036 wrote:will 285/30 fit? orr...? any suggestions? i wanna do fk452s buttt i wanna make sure it will at least have a good chance of mounting before i buy them.
[QUOTE=chmercer;37036]will 285/30 fit? orr...? any suggestions? i wanna do fk452s buttt i wanna make sure it will at least have a good chance of mounting before i buy them.[/QUOTE] 18x13 w/275/35/18 trampo: [img]http://www.angrylife.com/temp/275.jpg[/img] es100: [img]http://www.angrylife.com/temp/beadpop_02.jpg[/img]
NYC03Alti;37776 wrote:Considering that 19x8.5 +33 is pretty damn flush on my L31 Altima, an 18x10.5 -39 or 18x13 +1 would need one helluva widebody.
[QUOTE=NYC03Alti;37776]Considering that 19x8.5 +33 is pretty damn flush on my L31 Altima, an 18x10.5 -39 or 18x13 +1 would need one helluva widebody.[/QUOTE] an extra 3-4in isnt a big deal to some people.
bOosty.ViP;37781 wrote:i said where not what.;)
[QUOTE=bOosty.ViP;37781]i said where not what.;)[/QUOTE] Whoops. I seriously have been meaning to get my eyes check.
They are 18x13 -4 Work Equips that are on my old Y31 Cima with a 22mm spacer (effective offset -26). Widebody vip car :) The actual car is somewhere in Perth, WA (Australia)
care to post pics of the car?
Well, that just sux... the thread containing my pics disappeared (lets hope VipStyleCars.com V3 doesnt have "pruning" of old threads!) When she came off the boat: [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/IMGP0365.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/IMGP0371.jpg[/IMG] Thats with [b]2[/b] sets of 22mm spacers in the rear for an effective offset of -48. I had to take one set off otherwise i couldnt get it registered After a few months, a new coat of paint and a wad of cash: [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/P9030225.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/P9030221.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v257/dbloemhard/VIP/P9030224.jpg[/IMG]
whoa Dom, where'd that car go? I guess I was still trying to skid around corners back then haha
LoL, i sold it in March last year to a guy who is going to put alot more work into it and turn it back into a showcar. Airbag susp. popped soon after taking those pics and it took me damn near 6 months of stuffing around with replacement bags; before i finally put coilovers in it... But by that time I had other commitments and lacked motivation to finish it. Funny thing is, that car could also be a drift car with some engine tweaks. I wasnt game, but the buyer showed me it has no problems lighting up both of those 295/35s thanks to a torquey VG30DET and LSD.