Work Euroline DH's - can i order wider outer lips for them?

While checking out my Eurolines I noticed that they were 2 piece. How exactly is it assembled? Is the face and inner barrell one piece and the outer lip the 2 piece? I would love to widen them from 9/10's to 10/11's. They are  roughly +30 offset. And im running a kicks spacer to bring them out to an effective offset of atleast 0 or less.

Thanks guys, i would love to order a set of 6" lips for the 9's and run the 10's in the front...

The eurolines I had were 2p also and it was 2p welded. So the barrel/lip was one piece and the face was welded onto the barrel. So you would need an entire new barrel or some places can do some cutting but I don't know too much about that process.

MY VSKF's were also welded I could tell... My Wed Kranze ER-M's how ever simply unbolted apart. Why does work wheels weld their barrels/faces together? Also can companies just widen my other lips then? Who do you guys recommend?

I knew I would use this link sooner rather than later:

[URL="http://www.vipstylecars.com/forums/showthread.php?t=27329&page=3"]http://www.vipstylecars.com/forums/showthread.php?t=27329&page=3[/URL]

Sounds like a lot of your Q's can be answered with a brief read.  Enjoy:biggthumpup: