Megan EZ custom spring rates

Hey I am currently lowered my UCF10 on megan EZ and at my slammed height my ride is a little too bouncy for my taste. I am looking at changing out the springs to ones with higher spring rates. My first question is what size springs should I be looking at? Like how big of a spring and the ID and OD sizes that would work for me. Also can you guys offer any insight on how high of a spring rate I should be looking at? 

PS: I am lowered enough to be flush with 19x8.5/9.5 's with -4 degree and -5 degree chamber. No tire showing on top running 225/35/19 all round

you are limited to a range of +/- a couple kg's before you will be out of spec for the damper.

yea +/- 2kg.  your best bet is to see if megan will rebuild em for you with matchin dampers

after the cost of rebuild and getting higher spring rates. You couldve just bought bc's or something with custom rates no?

pretty much, and have better ride quality as a bonus. boo for megan.

People just ask too much out of megans ez

no, megan just delivers sub par products. they ride like a**, don't go low, and even feel cheap. anybody who recommends megans, lp or ez, should be marked off your "who to take advice from" list. s**t's trash.

^^True story...