For those of you with spacers**

Need a little help.

I got H&R 15mm spacers (used online) did not include longer studs.

they will go on the rear of my Gs430.....


problem is, I cannot find these longer studs.....pepboys,autozone, orielley's and Napa......no luck.

anyone know where to get????

12mmx1.5 bolt head is 14mm

You didn't get bolt on spacers did you? Well... get some if you want to do it the right way... Otherwise, you're going to need to ORDER some online most likely. I'm sure TRD has them or check Summit Racing for generic ones, you'll just have to know your spline count and spacing for the OEM ones to match them up.

[url]http://cgi.ebay.com/ebaymotors/Wheel-Studs-Bolts-Extended-Toyota-Scion-Lexus-12x1-5_W0QQcmdZViewItemQQcategoryZ33749QQihZ012QQitemZ220069616684QQrdZ1QQsspagenameZWDVW[/url]

You might be able to find some on the summit site, but you gotta figure out which one exactly you need. 

If you do end up getting 15mm bolt ons, make sure your wheels have space on the back pad to clear the stock studs which might protrude past the 15mm spacer.

ARP has extended wheel studs i believe. look on summit racing
[url]http://www.inlinefour.com/arpexwheelst.html[/url]
i dont know the specs if they are 14mm or not but that should help i guess

[QUOTE=gato;38772]Need a little help.

I got H&R 15mm spacers (used online) did not include longer studs.

they will go on the rear of my Gs430.....


problem is, I cannot find these longer studs.....pepboys,autozone, orielley's and Napa......no luck.

anyone know where to get????

12mmx1.5 bolt head is 14mm[/QUOTE]I ended up in the same boat as you. I bought some 15mm spacers thinking my oem studs were long enough to tighten down the lug nuts, but I was wrong. I ended up just getting a pair of TCsportline 15mm wheel spacer/adapters. Trying to find the right size of longer studs was a pain for my car because cross-referencing studs to my car wasn't easy and seemed different than the ones that Nismo offered. What size is the center bore hub required for your GS430? I have a pair of TCSportline wheel spacer/adapters that I bought that I didn't need. Here is my listing for them where no one decided to pick them up. Let me know if you want them and just name a price for them. If your center bore hub size is smaller than them which are 67.1mm, they will still fit and center themsevles since the hole for the lugs are tapered and centric. Just let me know. Thanks.

[url]http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=012&sspagename=STRK%3AMEUS%3AIT&viewitem=&item=220057654054&rd=1,1[/url]

try old toyota land cruiser studs...

you'll have to verify the spline with your parts guy

Also, try 97-04 Toyota Tacoma/Tundra rear wheel studs in place of the fronts. Good luck.

Hey man, I've got 16 brand new ARP studs that are a tad over 60mm long. Package says 12mm, 1.5 Thd, 0.59 Kurled Dia. Pretty sure they'll work for you.

PM me if you need them. They're just collecting dust.

thanks for replys guys...


they are in fact 12mm x 1.5 and to run a 15 to 20 mm spacer you need a 45 to 60mm in length to clear.



got mine ordered from Ichiba.   pics soon on my fitment.

..