Y33 LED License Plate Light Bulb Replacement DIY

I switched out my regular incandescent license plate light bulbs with LED bulbs today. I figured why not snap some photos along the way & write up a quick tutorial :shrug: I know this is hella easy to do, but for the people that don't know, now have a visual on how to do this DIY :biggthumpup:

[IMG]http://i40.tinypic.com/mh3r.jpg[/IMG]


Took me about 15 minutes to do.

Tools needed are:
-phillips screwdriver
-8mm socket 
-socket wrench
-flat head screwdriver


1) First off, you're gonna have to take off these 2 covers.

[IMG]http://i43.tinypic.com/29f9gy0.jpg[/IMG]

2) Using a phillips screwdriver or a socket wrench & an 8mm socket, you need to unscrew these nail/bolts that are holding the covers in place.

[IMG]http://i42.tinypic.com/2d9cphh.jpg[/IMG]

3) After unscrewing, disconnect this harness. I used a flat head to push down the clip and pried it out (CAREFULLY!)

[IMG]http://i42.tinypic.com/m836us.jpg[/IMG]
[IMG]http://i42.tinypic.com/2k1tfm.jpg[/IMG]

4) With the bulb housing disconnected, using a flat head, carefully lift up the tabs (on top & bottom) holding the cover onto the housing & cover comes right off.

[IMG]http://i44.tinypic.com/21jqe4y.jpg[/IMG]
[IMG]http://i43.tinypic.com/hs51ye.jpg[/IMG]

5) Replace old bulbs with new white LED bulbs.

[IMG]http://i39.tinypic.com/34yxw9i.jpg[/IMG]

6) TEST to see if LED's come on.

7) If it does then , reverse the steps for re-installation & walaa! :biggthumpup: