Subaru SwagWagon
Lorenzo aka Benzo from Oklahoma City. There are VERY few cars who fit into the VIP category here. I know my car is not VIP at all. I just love the whole styling and aggressive nature. I know there are clean examples of less than -5 degress camber and tucking rim and thats kind of what im going for. Its a stock body, mid offset, low camber, and slightly awkward platform in general but here is what ive done so far with my 96 Legacy Wagon.
with 14x5.5+55 stock wheels and coilovers

then on some stock 16x6.5+55 '04 wrx wheels
Then..After adding some modest 18x8.5+35 sterns
wrapped in 215/35 tires, and a jdm grill.
plans are to lower the rears to tuck rim and the fronts to just go as low as possible. hopefully pretty much sitting on the rim. fenders are rolled flat.
rear camber is set to as much as my slotted coilover lower mounts will allow and id say -2 or so up front.
Exhaust is in, ordering a front lip this week, getting skirts and tint soon hopefully to make it a little more aggressive..if thats not an oxymoron for this model ha.
oh and here is my previous car which i sold before i could paint and lower it.
any of the mods wana allow me to edit my posts? :thelaw:
hope someone finds this interesting :smiley-rofl:
View original BBCode
Lorenzo aka Benzo from Oklahoma City. There are VERY few cars who fit into the VIP category here. I know my car is not VIP at all. I just love the whole styling and aggressive nature. I know there are clean examples of less than -5 degress camber and tucking rim and thats kind of what im going for. Its a stock body, mid offset, low camber, and slightly awkward platform in general but here is what ive done so far with my 96 Legacy Wagon.
with 14x5.5+55 stock wheels and coilovers
[IMG]http://farm8.staticflickr.com/7066/6891717193_786a3f836e_z.jpg[/IMG]
then on some stock 16x6.5+55 '04 wrx wheels
[IMG]http://farm7.staticflickr.com/6114/6337475673_22a294c105_z.jpg[/IMG]
Then..After adding some modest 18x8.5+35 sterns
wrapped in 215/35 tires, and a jdm grill.
plans are to lower the rears to tuck rim and the fronts to just go as low as possible. hopefully pretty much sitting on the rim. fenders are rolled flat.
rear camber is set to as much as my slotted coilover lower mounts will allow and id say -2 or so up front.
[IMG]http://farm8.staticflickr.com/7198/6964779095_d286c5a40c.jpg[/IMG]
[IMG]http://farm8.staticflickr.com/7037/6966880591_e93843369d_z.jpg[/IMG]
[IMG]http://farm8.staticflickr.com/7177/6964779231_cf68993a19.jpg[/IMG]
Exhaust is in, ordering a front lip this week, getting skirts and tint soon hopefully to make it a little more aggressive..if thats not an oxymoron for this model ha.
[IMG]http://farm8.staticflickr.com/7059/6987126187_a327b9687f.jpg[/IMG]
oh and here is my previous car which i sold before i could paint and lower it.
[IMG]http://farm7.staticflickr.com/6175/6152918937_fd3f2171b8_z.jpg[/IMG]
[IMG]http://farm7.staticflickr.com/6188/6079429151_9a258b2375_z.jpg[/IMG]
any of the mods wana allow me to edit my posts? :thelaw:
hope someone finds this interesting :smiley-rofl:
damn i want a subarau wagon like that
View original BBCode
damn i want a subarau wagon like that
Nice Subie, I've always liked the older wagons.
-Sideways the Seven
View original BBCode
Nice Subie, I've always liked the older wagons.
-Sideways the Seven
thanks for the kind comments fellas ^_^ the s13 didnt have a/c so for half the price i sold it for
i got this ugly wagon to haul my son around in[hes one month today =D] but of course i had to mod it. lol rides pretty smooth compared to my super stiff drift setup ha
sadly the previous owner put a hole through the front bumper and the headlights are HAZY
so those are things id obviously like to address at somepoint when im not throwing money away elsewhere

View original BBCode
thanks for the kind comments fellas ^_^ the s13 didnt have a/c so for half the price i sold it for
i got this ugly wagon to haul my son around in[hes one month today =D] but of course i had to mod it. lol rides pretty smooth compared to my super stiff drift setup ha
sadly the previous owner put a hole through the front bumper and the headlights are HAZY
so those are things id obviously like to address at somepoint when im not throwing money away elsewhere
[IMG]http://farm8.staticflickr.com/7212/6856675448_d3e07af24a_c.jpg[/IMG]
was initially wanting to something like this but we'll see how it turns out before i get bored and sell it =P

View original BBCode
was initially wanting to something like this but we'll see how it turns out before i get bored and sell it =P
[IMG]http://cdn.mkimg.carview.co.jp/minkara/photo/000/002/797/492/2797492/p1.jpg?ct=9df034efe799[/IMG]
headlights clean up with scratch X. Selling mine right now as a project as I pushed it to the side when I found a 2.5 GT wagon for my brother.
View original BBCode
headlights clean up with scratch X. Selling mine right now as a project as I pushed it to the side when I found a 2.5 GT wagon for my brother.
hmm ill have to try that stuff!
i just went sanded with some cleaning compound and scrubbed with some crest
:slap:
they look way better already so im excited to try to real stuff.
well im glad i didnt get bashed just for being a little curious and wanting to poke my in
fully knowing my car is nowhere near VIP but i do love aggressive wheel fitment and the full bodied rides.
i miss my sc400 and hopefully can sell my car for a ls400 since they are so cheap to come by.
heres a more closeup pic of the fronts. hoping to get the fender pretty much sitting on the rim. i rolled them pretty damn good
any tips for getting this off if a deep socket doesnt work??

View original BBCode
hmm ill have to try that stuff!
i just went sanded with some cleaning compound and scrubbed with some crest
:slap:
they look way better already so im excited to try to real stuff.
well im glad i didnt get bashed just for being a little curious and wanting to poke my in
fully knowing my car is nowhere near VIP but i do love aggressive wheel fitment and the full bodied rides.
i miss my sc400 and hopefully can sell my car for a ls400 since they are so cheap to come by.
heres a more closeup pic of the fronts. hoping to get the fender pretty much sitting on the rim. i rolled them pretty damn good
[IMG]http://farm8.staticflickr.com/7042/6964779153_fb96ab6534.jpg[/IMG]
any tips for getting this off if a deep socket doesnt work??
[IMG]http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/419476_105479699581976_100003598381526_18647_1479471224_n.jpg[/IMG]
View original BBCode
[IMG]http://farm7.staticflickr.com/6116/7003027069_e2b45723a7_c.jpg[/IMG]
slot it and try a screwdriver. or break the stud and replace it, replacement stud should be like $3 at autozone.
View original BBCode
slot it and try a screwdriver. or break the stud and replace it, replacement stud should be like $3 at autozone.
yeah the seller sent me two free replacement lugs actually so no harm no foul but its just really annoying because the left side of my car has no camber adjustment without taking the wheel off so its not even tucked xD
wtf happend to all my picture links!
...meh...

View original BBCode
yeah the seller sent me two free replacement lugs actually so no harm no foul but its just really annoying because the left side of my car has no camber adjustment without taking the wheel off so its not even tucked xD
wtf happend to all my picture links!
...meh...
[IMG]http://farm7.staticflickr.com/6060/6856912484_1731fca7fb_c.jpg[/IMG]
guna see if i can get the exhaust on this sat along with getting this broken lugnut off
so i can add camber in the back and go lower finally
View original BBCode
guna see if i can get the exhaust on this sat along with getting this broken lugnut off
[IMG]http://farm8.staticflickr.com/7204/6927539672_74ebe8b3a7_z.jpg[/IMG]
so i can add camber in the back and go lower finally
next pics should be lower ^_^ got the broken lugnut off so i wont have to run 0 camber on my drivers side

View original BBCode
next pics should be lower ^_^ got the broken lugnut off so i wont have to run 0 camber on my drivers side
[IMG]http://farm8.staticflickr.com/7190/7083944013_6f47860a3b_b.jpg[/IMG]
GETTIN LOWA! from CCM13

View original BBCode
GETTIN LOWA! from CCM13
[IMG]http://farm8.staticflickr.com/7186/7112888007_deca1e981d_c.jpg[/IMG]
not bad..
i would:
*add a front lip
*better wheels with big lips and low offset
*blacked out headlights
*dark tint
*and roof rack delete
would really set it off..
View original BBCode
not bad..
i would:
*add a front lip
*better wheels with big lips and low offset
*blacked out headlights
*dark tint
*and roof rack delete
would really set it off..
NET;449501 wrote:not bad..
i would:
******
would really set it off..
front lip - they dont make one that fits these model legacys but i really need one!
better wheels - woulda happened had this not been a temporary project/daily until i get an LS
but my stock wheels are 14x5.5+55 which im sure most of you here couldnt beat for a stock wheel size ;P
so 8.5+35 is fairly aggressive. but to get a deep lip with about the same flushness id have to run like a 18x7+0 lol
blacked out headlights - that might look okay since these are all fucked lol but meh
dark tint - thats probably my next mod after exhaust
roof rack delete - i will look into if it doesnt leave any holes in the roof. too lazy to fix any holes on this thing ha
but thanks! i know this thing is kinda janky and random but
it looks kinda interesting to look at in an ugly baby kind of way ^_^
i always try to hide or ignore the fact that someone with a trailer hitch seems to have backed up into me at some point...

View original BBCode
[QUOTE=NET;449501]not bad..
i would:
******
would really set it off..[/QUOTE]
[B]front lip [/B]- they dont make one that fits these model legacys but i really need one!
[B]better wheels[/B] - woulda happened had this not been a temporary project/daily until i get an LS
but my stock wheels are 14x5.5+55 which im sure most of you here couldnt beat for a stock wheel size ;P
so 8.5+35 is fairly aggressive. but to get a deep lip with about the same flushness id have to run like a 18x7+0 lol
[B]blacked out headlights[/B] - that might look okay since these are all fucked lol but meh
[B]dark tint [/B]- thats probably my next mod after exhaust
[B]roof rack delete[/B] - i will look into if it doesnt leave any holes in the roof. too lazy to fix any holes on this thing ha
but thanks! i know this thing is kinda janky and random but
it looks kinda interesting to look at in an ugly baby kind of way ^_^
[IMG]http://farm9.staticflickr.com/8159/7115400197_22a79b5282_c.jpg[/IMG]
i always try to hide or ignore the fact that someone with a trailer hitch seems to have backed up into me at some point...
[IMG]http://farm8.staticflickr.com/7061/6969322250_1a12439441_c.jpg[/IMG]
might be trading for an LS
ill keep ya updated ^_^
View original BBCode
might be trading for an LS
ill keep ya updated ^_^
yaa buddy finally anotha subi lova, i got a jdm GT-B myself just stancin in storage waitin for winter time fun. looks good dude
View original BBCode
yaa buddy finally anotha subi lova, i got a jdm GT-B myself just stancin in storage waitin for winter time fun. looks good dude
i wish mine was one of those ^_^ mines hella stock, slow, and ugly so im selling it!
i just wanted something cheap to stance that was AWD
but now i got something even cheaper to work on..
helloooo project LS! with cloth interior and
Nakamichi sound system
http://www.vipstylecars.com/forums/showthread.php?t=29578
View original BBCode
[FONT=Arial]i wish mine was one of those ^_^ mines hella stock, slow, and ugly so im selling it!
i just wanted something cheap to stance that was AWD
but now i got something even cheaper to work on..
helloooo project LS! with cloth interior and [I]Nakamichi sound system
[url]http://www.vipstylecars.com/forums/showthread.php?t=29578[/url]
[/I][/FONT]