Thread #29117

Y33 idle help

6 archived posts · 384 historical views

bob_sagatMarch 26, 2012
#444237

Y33 idle help

So I just got done putting in new valve cover gaskets and spark plugs on my 99 Q. WHen i started it it it was idling up and down from 1k-2k, then after about a minute it went down to about 550 rpm and started sputtering real bad. It ran for about 5 minutes before shutting off. If I rev it it feels great, so I'm thinking it might have something to do with the IACV? I had to remove the throttle body and iacv to remove the valve cover. I'm going to check it out tommorrow, look for any vaccum leaks or anything. Anyone know what might be causing the rough idle?
View original BBCode
So I just got done putting in new valve cover gaskets and spark plugs on my 99 Q. WHen i started it it it was idling up and down from 1k-2k, then after about a minute it went down to about 550 rpm and started sputtering real bad. It ran for about 5 minutes before shutting off. If I rev it it feels great, so I'm thinking it might have something to do with the IACV? I had to remove the throttle body and iacv to remove the valve cover. I'm going to check it out tommorrow, look for any vaccum leaks or anything. Anyone know what might be causing the rough idle?
BlitzMarch 26, 2012
#444238
MAF sensor? vacuum leak?
View original BBCode
MAF sensor?   vacuum leak?
lowlyfey34March 26, 2012
#444255
if it didnt do it before i did work...then sounds like a vacuum leak.
View original BBCode
if it didnt do it before i did work...then sounds like a vacuum leak.
bob_sagatMarch 26, 2012
#444317
Eureka! It was the iacv gasket, thanks guys.
View original BBCode
Eureka! It was the iacv gasket, thanks guys.
BlitzMarch 26, 2012
#444328
so basically a vacuum leak at the IACV which in turn affects the MAF... good job!
View original BBCode
so basically a vacuum leak at the IACV which in turn affects the MAF...  good job!
lowlyfey34March 26, 2012
#444336
unmetered air is a no-no lol
View original BBCode
unmetered air is a no-no lol