Thread #29184
Will 19x10.5 +25 wheels fit the front? and if so what will be needed to run wheels of that size?
well it all depends on how low you wanna go, how much - camber you wanna run, and tire size....I was running 18x10.5 -7 with 225/40 front camber plates maxed out and real light pull and didn't have no problem..but you you will need to remove the wheel well liners...hope this helps bro.. [IMG]http://i85.photobucket.com/albums/k68/biggie8321/DSC02609.jpg[/IMG] [IMG]http://i85.photobucket.com/albums/k68/biggie8321/DSC02593.jpg[/IMG] [IMG]http://i85.photobucket.com/albums/k68/biggie8321/vip2.jpg[/IMG]
You might wanna rock a 25mil spacer with that front :)
Yeah if you gonna do bags and camber 0 to +10 will on roll and pull.
I got a 10.5 front. I'm running 235/35
Crazy!
hmmm if I were you I'd check inner clearence... strut to rim. with that wide of a wheel and that high of an offset it's going to go way inside. If there is contact then maybe some spacers can help with inner clearence. I think if you go air bags you might be running into more problems though. good luck and let us know how it looks.
yeah you might have inner clearance problems and prob need a spacer
10.5j +25 wont clear your coilover. You'll need to space to at least +10, probably like +5
OK thanks every one. I guess I'm gonna go a different route I'm currently running spacers and I wanna try to stay away from them. In your opinion what would be the best size and offset for the front and back without having to run crazy amount of camber? I don't know if it will help but I will be only running coilovers for now.
10j +0 on the front 11j -5 in the rear.
0 all around on stock body. Roll pull +10 all around.