agressive offset?

What's a good aggresive offset to run on a Y33 Q45. Here are my specs: most likely running powered by max VIP spec coils, not a WHOLE lot of camber (a couple degrees is fine), can't get too wide (no more than 10", gotta keep tire cost down), looking to out either 18's or 19's on the car, going to roll fenders, and like most people I would like a staggered setup. Now I don't absolutly have to be "hellaflush", I'd prefer to be tucking anyway. Negitive offset would be an awesome option but low 30's to 20ish is fine, just whatever would fit.

You Nissan guys can fit insane amount of offset in your wheel wells which make me jealous. I've seen somewhere as low as -30 with a lot of camber. For what you're going for I'd say somewhere around -10 to +15 offset.

That sounds about right. +10 to clear bag. If u are going to keep it on coils. U can go crazy.

rimtuck.com

I knew about rimtuck.... just completely forgot

Yea the y33 has pretty fat fenders, just find what you want and make it work!

[QUOTE=4DGS;457423]Yea the y33 has pretty fat fenders, just find what you want and make it work![/QUOTE]


workin on it dude, it soo hard to find good offset wheels in the size and price im willing to pay

What price would that be. I've never seen good wheels go for less than 2500 


---
I am here: [url]http://tapatalk.com/map.php?auj4jq[/url]

this is gunna sound lame but 1500 is pushing it

Your in the wrong game then. Try vrwheels


---
I am here: [url]http://tapatalk.com/map.php?c5vdd2[/url]

Save more, budgets too low.

$1500?  Varstoen LM copies but you would be looked down upon by most.

Save some more!
Like 33flovors said Vrwheels or czwheels

i might be able to go to 2g's+ if they're really nice and good offset.

is this $2000 you are talking about include buying tires and mounting?     with tires you are going to have to get super lucky without tires I don't think it will be "really nice" but just "nice"

These would look nice on a Y33 and it's good price.   Just add 10mm spacer all around.  $1680 on VRwheels
[IMG]http://www.vrwheels.com/images/B_1247.JPG[/IMG]

Those AutoCoutures look nice... is that a 2- or 3-piece design? If 3-piece those would be great starter wheels with spacers and after the op can save some more he can rebuild em to get that aggressive set-up his keen on.

[QUOTE=Blitz;457787]These would look nice on a Y33 and it's good price.   Just add 10mm spacer all around.  $1680 on VRwheels
[URL="http://www.vrwheels.com/images/B_1247.JPG"][IMG]http://www.vrwheels.com/images/B_1247.JPG[/IMG][/URL][/QUOTE]

I saw those and really like them but, my father kinda has the last say, considering I live in his house :/. he's not real impressed with those wheels.

also with 10mm spacers would i have to put on longer studs?

Give examples of rims he is "impressed" with...

[QUOTE=Blitz;457857]Give examples of rims he is "impressed" with...[/QUOTE]


eurolines, AME shallens, SSR viennas, weds maveriks 107Ds... things with a little detail incorporated in to the the face of the wheels.

[QUOTE=Dranom;457779]Save some more!
Like 33flovors said Vrwheels or czwheels[/QUOTE]

this

and keep searching these sites and checking classifieds till you find the wheels you want and hopefully they are in the budget you are looking to spend is your best bet.

from the sound of it you are looking for full face style...   Those you can find for 2K wheels only just have to wait.   but the mavericks is going to be tough since it is newer.   All the other ones are older so they come up time to time.

no such thing as a good starter wheel - buy the wheels you really want the 1st time around

[QUOTE=33flavors;457871]no such thing as a good starter wheel - buy the wheels you really want the 1st time around[/QUOTE]



I would do that but I don't have $3000+ to spend on wheels right now

[QUOTE=whabbahead9;457872]I would do that but I don't have $3000+ to spend on wheels right now[/QUOTE]

What everyone is saying is save and buy later.   You said you could come up with $2000...why not wait alittle more and come up with $800-$1000 more and get a very nice wheel.   We are trying to help you avoid making the mistake many of us did by buying something we didn't want from the get-go.    I think even brand new Viennas or Mavericks are under $3K mark since they are 2 piece welded.

Buy once cry once.

Saving up is always worth it, you'll pay for what get.

VIP Modular wheels are built to order, with your own offsets & sizing. Quality made wheels.
[URL="http://farm8.staticflickr.com/7248/7550731260_415776bcea_b.jpg"][IMG]http://farm8.staticflickr.com/7248/7550731260_415776bcea_b.jpg[/IMG][/URL]

[QUOTE=VIP Modular Wheels;458042]Saving up is always worth it, you'll pay for what get.

VIP Modular wheels are built to order, with your own offsets & sizing. Quality made wheels.
[URL="http://farm8.staticflickr.com/7248/7550731260_415776bcea_b.jpg"][IMG]http://farm8.staticflickr.com/7248/7550731260_415776bcea_b.jpg[/IMG][/URL][/QUOTE]



Would love a set of your wheels like a set of VR01's or VR04's... How much would it be for a set of 19's

PM'd

You could buy my Lowenhart LSRs and run them with wobble bolts in back and adapters or wobble nuts in front too. 20x10/11 stagger and I will sell them to you cheap.

not a big fan of the three spoke wheel