fs Y50 air suspension + accuair

Located in Maryland- 3400 plus paypal fees, shipped. Im not 100% on miles since I didnt write it down when I installed them but Id guess 10k or so. Here's a list of whats included

D2 racing air suspension basic kit with front sleeved bags, rear has bellows http://www.d2racing.com/content/products/basic_air_suspension $2400
Accuair E leveling system touchpad with wireless key fob remote (2) $1290.00 from http://www.accuair.com/product_elevel_tpad.html
Accuair VU4 $499 + $50 for 1/4" PTC fittings, needed for the 1/4" line supplied from D2 unless you upgrade to 3/8" which would mean you need to change the fittings on the bags. http://www.accuair.com/product_vu4.html

I also have DOT approved fittings instead of what was supplied from D2, along with a 25' coil hose connected to a 160psi pressure regulator with a quick release connection for either a blow nozzle or an air chuck for tires (have both of them), custom made SS braided hose for the compressor to the tank that allows swiveling unlike what was supplied. All that was over $150, parts purchased from TIPCO http://www.tipcotech.com/

Only thing I wont send is the tank but that can be purchased for 75 bucks on the UAS website.

All that is $4390 without taxes and shipping from all the sources listed.

[SIZE=3][FONT=arial]Located in Maryland- 3400 plus paypal fees, shipped. Im not 100% on miles since I didnt write it down when I installed them but Id guess 10k or so. Here's a list of whats included D2 racing air suspension basic kit with front sleeved bags, rear has bellows [URL]http://www.d2racing.com/content/products/basic_air_suspension[/URL] $2400 Accuair E leveling system touchpad with wireless key fob remote (2) $1290.00 from [URL]http://www.accuair.com/product_elevel_tpad.html[/URL] Accuair VU4 $499 + $50 for 1/4" PTC fittings, needed for the 1/4" line supplied from D2 unless you upgrade to 3/8" which would mean you need to change the fittings on the bags. [URL]http://www.accuair.com/product_vu4.html[/URL] I also have DOT approved fittings instead of what was supplied from D2, along with a 25' coil hose connected to a 160psi pressure regulator with a quick release connection for either a blow nozzle or an air chuck for tires (have both of them), custom made SS braided hose for the compressor to the tank that allows swiveling unlike what was supplied. All that was over $150, parts purchased from TIPCO [URL]http://www.tipcotech.com/[/URL][/FONT][/SIZE][FONT=Lucida Grande] [/FONT][SIZE=3] Only thing I wont send is the tank but that can be purchased for 75 bucks on the UAS website.[/SIZE] [SIZE=3][FONT=Lucida Grande]All that is $4390 without taxes and shipping from all the sources listed.[/FONT][/SIZE]