Wheel widths for g coupes

Any one own a g35 coupe that has even able to fit a 20/11.5 front with a 20/12.5 rear ? Curious to know I'm rebuilding my wheels and I want deep lips close to 6.5 rear 4.5 front as deep as I can go from having a week set of specs on the set :/. If so any pics possibly trying to slam the g as well

Well you're not slamming it with 20x11.5 in the front, you're going to pretty damn high either way.

But you can fit them no problem, but depends on the final offsets once you're done the relip.

You'd be better of rebarreling and going with 20x10 20x11, that way you can run 225s up front and 245s in the back and still go kinda low. But you're really not gonna be slammed on 20s unless you're kitted to hell.

Well another reason why I'm relipping that is because my lips are weak and want more aggressive but as long as I'm going decent low ya know I don't think I'll mind and I guess I'll be running a lot of camber then lol what are you running?

Well with a rebarrel you can have huge lips but small barrels, which allows you to run tires that fit nicely, will also give you lots of room to camber which big barrels won't.

I drive a sedan so it's really irrelevant, but my weds are 19x10 -1 19x11.5 +16 my equips are 18x10 18x11 +10

[QUOTE=4DGS;464141]Well you're not slamming it with 20x11.5 in the front, you're going to pretty damn high either way.

But you can fit them no problem, but depends on the final offsets once you're done the relip.

You'd be better of rebarreling and going with 20x10 20x11, that way you can run 225s up front and 245s in the back and still go kinda low. But you're really not gonna be slammed on 20s unless you're kitted to hell.[/QUOTE]

So these G's don't have much room in the wheel wells...?

OP: You can run nearly any size you want depending on your willingness to spend thousands on bodywork :shrug:

lol @ asking about G coupes on VSC

Go to G35driver

Make the inner barrel smaller and outside one larger.. wheel width is nothing without offsets.. you can have a 9" wheel with a lip larger than a 10" wheel. just make the inners smaller than outer.. whats the current specs on your wheels right now? and how low are you? how low do you plan to go? any body work ?

[QUOTE=Juzzo;464176]So these G's don't have much room in the wheel wells...?

OP: You can run nearly any size you want depending on your willingness to spend thousands on bodywork :shrug:[/QUOTE]

What? G's have tonnes of room. I think you misinterpreted what was said. G/Z Can fit 10.5 with negative offsets with a roll and zero camber.

The sedan doesn't have much room...

Come visit my thread on driver, I'll walk you through everything.

[url]http://g35driver.com/forums/wheels-tires/288108-have-question-s-about-wheels-ask-here-284.html[/url]

[QUOTE=RhafikNUA7;464212]Make the inner barrel smaller and outside one larger.. wheel width is nothing without offsets.. you can have a 9" wheel with a lip larger than a 10" wheel. just make the inners smaller than outer.. whats the current specs on your wheels right now? and how low are you? how low do you plan to go? any body work ?[/QUOTE]
Well I meant diameter wise... e.g. fitting 20"ers and still dragging frame.

And I do know that most Nissan's can fit ridiculously spec'ed wheels, unlike most Toyota's :shrug: