Thread #31049
Looking for rims with an aggressive offset for my 03 m45 message me or post up what you have
pmd
Replied
Aggressive? I've got 19x9 and 19x10 +25 BMW 7 series wheels when 25mm adapters (essentially 0 offset)
How aggressive do you want? Negative offset?
sell 'ya mine....
Idc show me what ya got
I want big lips
[SIZE=3][FONT=Calibri]I have a set of TrafficStar STR's in 20x9.5 +24 and 20x10.5 +20. Fronts are high disc so they’ll clear BBK’s. [/FONT][/SIZE] [SIZE=3][FONT=Calibri]If you want to get really crazy, I have a set of Work Meister S1 in 19x11.0 -2mm T Disk (4.3" Lip) and 19x12.5 +5mm T Disk (4.8" Lip)[/FONT][/SIZE]
Pmd
Bump email pics and specs if you have something for sale [email]gameoverbuilt@gmail.com[/email] Looking to spend $2500 and lower
Emailed you back....also have a set of brand new Vredestein tires in 245-30-20.
I didn't get your email? [email]Gameoverbuilt@gmail.com[/email] send me a list and pics of everything u got please
Sent it again....didn't get a error the first time.
Still nothing lol
These are in excellent condition. Black/polished with chrome lips..not polished. 20x9.5 +24 20x10.5 +20 These will be very aggressive. [IMG]http://i16.photobucket.com/albums/b13/actolex/New%20GS/STU_7069.jpg[/IMG] [IMG]http://i16.photobucket.com/albums/b13/actolex/New%20GS/FrontQtr2.jpg[/IMG] [IMG]http://i16.photobucket.com/albums/b13/actolex/New%20GS/RearQtr1.jpg[/IMG] [IMG]http://i16.photobucket.com/albums/b13/actolex/New%20GS/Sneakpeek.jpg[/IMG] NO TIRES I also have a new set of Vredestein Sessanta that I was going to use on my M45 for cheap. They are 245-35-20 and have never been mounted and are brand new.
Anyone else?
lmk
Not like I'm dying to sell my wheels, but a guy from NY wants to buy them and I wasn't even trying to sell them. However, I wouldn't mind another change. These are super aggressive for Y34 though, so be warned. They will not clear the fenders without camber or pull or both. Weds Maverick 210S with approximately 2,500 miles of use (brand new in March) Front: 19 X 9.0 -6 H-Disk 5-114.3 Black Polish Face / Bronze Lip ** -6 Offset is maximum (81mm lip) Rear: 19 X 10.0 +5 H-Disk 5-114.3 Black Polish Face / Bronze Lip ** To get +5 offset, we have to use H-Disk (83mm lip) This is the only set of Maverick 210S that's been made in this color combo according to Weds. Asking $3400 shipped to Ok. with Continental Extreme Contact tires 215/35 & 225/35 in very good condition with great looking stretch, but the letters on the sidewalls of the back tires are all gone below "CONTINENTAL" because they rubbed the fenders. as you can see here, the wheel lip sticks out past the fender and all the small text you can see on the tires is long gone [URL="http://i194.photobucket.com/albums/z216/kdfalk/Maverick210s-2.jpg"][IMG]http://i194.photobucket.com/albums/z216/kdfalk/Maverick210s-2.jpg[/IMG][/URL] -5.5º frt -6.5º rr [URL="http://i194.photobucket.com/albums/z216/kdfalk/223932_2221680679356_1767870058_1049766_207311409_n.jpg"][IMG]http://i194.photobucket.com/albums/z216/kdfalk/223932_2221680679356_1767870058_1049766_207311409_n.jpg[/IMG][/URL] [URL="http://i194.photobucket.com/albums/z216/kdfalk/7245729062_f4d8368fb5_b.jpg"][IMG]http://i194.photobucket.com/albums/z216/kdfalk/7245729062_f4d8368fb5_b.jpg[/IMG] [/URL][URL="http://i162.photobucket.com/albums/t274/JDMJNKY/VIP/untitled64of99_zpsea1fc1c8.jpg"][IMG]http://i162.photobucket.com/albums/t274/JDMJNKY/VIP/untitled64of99_zpsea1fc1c8.jpg[/IMG][/URL]
Ill pass I'm looking for something different thanks tho
no worries, thanks to this thread I decided WTF and made a FS thread for the wheels.
Looking for 20in leon hardiritti beil,19-20s ordans or waffles with aggressive offset
you do realize unless you do broken leg status or wide body the car, super aggressive is going be a party to put on
I've got 19x10 +0 that poke to hell. Just a warning...I don't have pics though, just test fit at my house.
Kouki Monster;470846 wrote:you do realize unless you do broken leg status or wide body the car, super aggressive is going be a party to put on
[QUOTE=Kouki Monster;470846]you do realize unless you do broken leg status or wide body the car, super aggressive is going be a party to put on[/QUOTE] :biggthumpup:
I have access to a new set of 20" TrafficStar DTX's in black/polish. Hit me up if you're interested.
Ok.. What's the max I can run? I'm not scared of camber, I would actually like a good amount of camber but don't want the wheels looking up at me lol that's alil extreme
The DTX's I have access to, which look like Waffe's are [TABLE="width: 359"] [TR] [TD]20x9 ET18 Black Machined w/ Polished Lip 20x11 ET14 Black Machined w/ Polished Lip[/TD] [/TR] [TR] [TD][/TD] [/TR] [/TABLE]
I've shared my experience with you. I have more camber than any of the Y34's stateside -that I'm aware of- my wheels poke and I've given you the offsets. -6.5r / -5.5f and I could easily add way more camber to the rear but I like the front and back to be more balanced and the front is maxed out on the plates at -5.5. Front wheels are -6 with 5mm spacer so -11, rear is +5 and the lip scrapes the fenders, so I have delryn bumpstops in place to stop wheel travel right at the fender. So based on that, -6.5 with +5 (on 10" wheel) is TOO aggressive and will not clear unless you pull and cut up your fenders. 10" wheel at +12 would be ideal for the rear to have whatever camber you want and still be able to clear rolled fenders, but not need to be pulled. If you go with a 10" wide wheel with anything lower than +12, you need to stretch / pull fenders at minimum. Or run delryn bumpstops like me and your 1" of compression in the back suspension will make your ride quality suck lol. With my old wheels, and no bumpstops, the car rode great with the PBM coils. Now on the other hand if you get the Battle Version upper camber arms for the back, you can "pull in" the top of the wheels and a 10" +5 would clear. When I started doing my rear suspension, the BV RUCA's were not out and I was impatient, so I got all the lower arms which of course helped me to get whatever camber I wanted, but it didn't help with getting the wheels to clear the fenders as I hoped they would.
Thanks for the info Kevin that helps me understand it more
You're also limited to the width of the rear since you have very little material between the fender line and the door. There's very little room to pull. I used 350Z rear suspension pieces to dial in the camber/toe, but there's only so much you can do. The wheels I have will require rolling, pulling, and camber, but it's doable. I was going to use them before I sold the car so I have an idea on what it would take to make them fit.
Which wheels? Do you guys know the factory wheel spec so I can use the wheel calculator? What's the max poke? I just don't wanna buy wheels and they not work on my car.
FLS...that was great info. Thank you for that post. +1
gameoverbuilt;470996 wrote:Which wheels? Do you guys know the factory wheel spec so I can use the wheel calculator? What's the max poke? I just don't wanna buy wheels and they not work on my car.
[QUOTE=gameoverbuilt;470996]Which wheels? Do you guys know the factory wheel spec so I can use the wheel calculator? What's the max poke? I just don't wanna buy wheels and they not work on my car.[/QUOTE] who does, thats why there are these :biggthumpup: [url]http://www.vipstylecars.com/forums/showthread.php?30642-FS-SSR-vienna-KLEIDS-19x9-5-20-LD-19x10-15-SLD-SOCAL-SGV-626-w-or-without-tires[/url]
If they were cheaper I would buy them
lol, even with the prices I already gave you shipped? how about this, how much are you willing to spend so a potential buyer will know what to expect. Good look with your purchase. :biggthumpup:
minkus;471068 wrote:lol, even with the prices I already gave you shipped?
how about this, how much are you willing to spend so a potential buyer will know what to expect.
Good look with your purchase. :biggthumpup:
[QUOTE=minkus;471068]lol, even with the prices I already gave you shipped? how about this, how much are you willing to spend so a potential buyer will know what to expect. Good look with your purchase. :biggthumpup:[/QUOTE] I quoted him a price for a brand new set of 20" TrafficStar's for the price he wanted to spend and the price included shipping.....not sure what he's looking for.
actolex;471084 wrote:I quoted him a price for a brand new set of 20" TrafficStar's for the price he wanted to spend and the price included shipping.....not sure what he's looking for.
[QUOTE=actolex;471084]I quoted him a price for a brand new set of 20" TrafficStar's for the price he wanted to spend and the price included shipping.....not sure what he's looking for.[/QUOTE] The price you quoted was fine, I just didn't like those wheels
minkus;471068 wrote:lol, even with the prices I already gave you shipped?
how about this, how much are you willing to spend so a potential buyer will know what to expect.
Good look with your purchase. :biggthumpup:
[QUOTE=minkus;471068]lol, even with the prices I already gave you shipped? how about this, how much are you willing to spend so a potential buyer will know what to expect. Good look with your purchase. :biggthumpup:[/QUOTE] I posted that way earlier
gameoverbuilt;471088 wrote:The price you quoted was fine, I just didn't like those wheels
[QUOTE=gameoverbuilt;471088]The price you quoted was fine, I just didn't like those wheels[/QUOTE] I'm confused....you didn't like them yet they were almost identical to the wheels you wanted....:shrug: Well I sent you another message on a different set of wheels.
gameoverbuilt;470793 wrote:Looking for 20in leon hardiritti beil,19-20s ordans or waffles with aggressive offset
gameoverbuilt;471053 wrote:If they were cheaper I would buy them
[QUOTE=gameoverbuilt;470793]Looking for 20in leon hardiritti beil,19-20s ordans or waffles with aggressive offset[/QUOTE] [QUOTE=gameoverbuilt;471053]If they were cheaper I would buy them[/QUOTE] dont know how your going to buy ordans or 20in beils if your not willing to spend more than 2600..... waffles on another hand you can get a little cheaper than the rest, i got them in 19x10 +7 +20, for 2500 with out shipping if your interested.
Auto Couture Magnifique 19"x10" +6 (hi-disk) 19"x11" +12 $2500 plus shipping
VIP Modular VX-310 19x10.5 +28 19x11.5 +3 with tires 225/35 245/35
I have a set of 20" MRR HR3 in 20x8.5/9.5 5x114.3
how about the ones on the Q? [URL]http://houston-imports.com/forums/showthread.php?t=566661[/URL]
lmk [url]http://www.stanceworks.com/forums/showthread.php?p=1033723#post1033723[/url]
[url]http://www.stanceworks.com/forums/showthread.php?p=1033723#post1033723[/url] i got these lmk
1 set of Works Euroline DH'z rare 19x8.5 19x10.5 off +25 with tires