y33 spindles fit y34/f50?

i know a few cats have used the y33 weld on for the y34/f50 but i've seen it mentioned that the complete spindle is compatable. who's actually done this? i have no doubts about the tie rod end or calipers, so the only variable is the lbj i guess.

I wish when I ordered my BC from you I was closer so we could have test fit them Y33 fronts. On paper it seems like they should fit...but unless someone has done it.

I know for a fact that the y32/y33 coilovers are a direct swap to the y34, for I have installed y32/y33 JIC coilovers onto my old Y34. Thats the beauty of owning a Nissan, cross platform compatibility.

so basically the front is a 12? i know the spindle that bolts up to a q is a 14 so id say no - OG without minor modification

are you referring to the caliper bolts? i know the y33 are 14mm, are the y34 12mm? good thing is i can order the coilovers with either size bolt hole (the first set stateside came with a 12mm bolt hole before the issue was adressed).

from my reading i believe the 12/14mm difference was due to if the car had ABS or not.

the first set i got had abs w/ 12mm. may be regional, or may be like you said. no telling.