2003 Infiniti M45 Y34 aggressive wheel widths and offsets questions

Hi guys! I have been a lurker for quite awhile now. Just finally getting back into the VIP scene. I am trying to buy some wheels for a 2003 M45. The specs on the wheels are: 20x10 and 11 with a +25 (front) and (+31) rear. I am planning on lowering the car and stretching the tires for a flush/semi-poked look. Will these wheels work?? I thank you guys in advance! Any help will be greatly appreciated!

Van

They will be sunken battleships. And you can't really get low with 20's on these cars due to the rear fender / door / seat layout.

I'm running 19s, very agressive for Y34 and for sale hehe  [url]http://www.vipstylecars.com/forums/showthread.php?31065-FS-Weds-Maverick-210S-silver-black-bronze-19-quot-Aggressive-Infiniti-setup[/url]

You need about +15 range to sit flush on these cars. Others have ran much more aggressive, but thats with roll and pull. And you won't get very low on 20s. LowLyfeY34 ran 20s for awhile so hopefully he can chime in.

I am running 20's and i guess it depends on how low you want to go. I want to lower more but limited by the coilover (megan). Wheel wdth play a big roll as well can't have to wide of wheel in the rear youll have inner clearance issue with the wheel well and strut housing.
i have a 20x11 +28 (10mm spacer) in the rear and it hits the fender and then tucks on bumps
Front 20x9 +5 (20mm spacer) and I had to roll a fair bit to fit. I would go 19 if you can but you can get 20's to fit. just takes time work and money.

with 20x10/11 i had +9/+27 with flat fenders and -3.5/-4 camber.....super flush with some camber kinda look ;)

im currently on 19x9/10 +6/+14 with -1.5/-1.8 camber and has a hair of poke but im not as low as i want (damn megans are maxed in the rear) i do plan on adding bigger spacers so i can run more camber.....which will gets me a tad more drop ;)