perzbenzMarch 8, 2013
#4875071992 AK Widebody Miata / WORK CR01 / Variochrome Pearl White / hayyyyyyyy
I have for sale my 1992 Mazda Miata 1.6 manual with working A/C and power steering. Clean titled and smog ready. It has about 225,000 miles on the chassis and roughly 70,000 miles on the 92 motor. I did all the work on this car myself, so I know exactly whats going on with the car. This car is my daily driver so it is reliable and dependable. I have recently taken it to Las Vegas with zero problems. The drivetrain is 100% stock and has been 100% stock. I am selling it because the car is at a point where it just needs a power plant to be complete and I'd rather go on to building another car. The car overall is in great shape. The exterior is in great shape. It was just vinyl wrapped about 2 months ago and came out great. Its vinyled using Hexis, one of the top vinyl products. The interior is also in great shape. There is a bit of wear on the drivers seat from every day use but that's about the only flaw with the interior. Mechanical wise it has not failed me. Transmission has never grinded or popped out of gear. Car pulls well through every gear. The clutch is starting to slip but I am including a F1 Spec Stage 1 clutch, OEM pilot bearing and OEM throwout bearing.I am asking $7,000. No trades. I am located in Lake Forest. My telephone number is 949 231 7252 feel free to call, text or email.
Exterior:
Autokonexion FG NC/NA Adore Front Bumper
Autokonexion FG Blister 30mm Fenders
Autokonexion GT Side Skirts
Autokonexion GT Rear Quarter Panels
Autokonexion V1 FG Front flares
Autokonexion V1 FG Trunk
APR GT GT Side mirrors
Slick Auto APR Sidemirror Miata mounts
Miata Turn Signal Induction Kit
Go Miata Low Profile Headlights
Antenna plug
Frankenstein Bolts
OEM Hardtop w/ headliner and defroster
Hardtop Spoiler
New Top of door weather stripping
Altezza tailights that I tinted using niteshades
Hexis Variochrome Pearl White Vinyl, i have 5ft x about 10ft left over.
Under the vinyl the color is Rustoleum battleship gray.
Interior:
Porsche GT3 Replica Seats on no name mounts.
Hard Dog M1 Roll bar
Miata Boss Frog Seat Belt Adapters
Black Door panels (with arm rests)
Black Dash
Black Seat belts
New OEM black shift boot
New interior top of door rubber stripping
New black carpeting
Momo Prototipo Steering Wheel
Daikei Hub Adaptor
Black Textured Voodoo Shift Knob
Injoy Visor blanking plates
Injoy Radio Delete
Auxiliary Connector in center arm rest
Sony Amplifier (in the trunk)
Focal Coaxial speakers in the doors
Engine
Engine has about 70k miles on the rebuild from PO. I did some extensive work on refreshing the motor in the past 2000 miles.
Parts that were replaced:
Valve cover gasket
Cam shaft seals
Crank shaft seals
CPK seal
Waterpump + gaskets
Thermostat + gasket
Timing belt
Accessory belts
Tensioners
Literally everything you can.
I also have new F1 spec stage 1 clutch, OEM Pilot , throwout bearing and rear main seal. Not installed. The car leaks a little from the rear main seal.
Suspension/Wheels/Brakes
Megan EZ-Streets
New inner and outer tierods and new boots.
Work CR01 15x9 -3 15x8.5 +3
Hankook 225/45 RS3's - 1k or less miles on them
Wilwood LBBK 4 Piston Front calipers
Current Pictures:
Pictures during the vinyl'ing
What color it is under the vinyl
View original BBCode
I have for sale my 1992 Mazda Miata 1.6 manual with working A/C and power steering. Clean titled and smog ready. It has about 225,000 miles on the chassis and roughly 70,000 miles on the 92 motor. I did all the work on this car myself, so I know exactly whats going on with the car. This car is my daily driver so it is reliable and dependable. I have recently taken it to Las Vegas with zero problems. The drivetrain is 100% stock and has been 100% stock. I am selling it because the car is at a point where it just needs a power plant to be complete and I'd rather go on to building another car. The car overall is in great shape. The exterior is in great shape. It was just vinyl wrapped about 2 months ago and came out great. Its vinyled using Hexis, one of the top vinyl products. The interior is also in great shape. There is a bit of wear on the drivers seat from every day use but that's about the only flaw with the interior. Mechanical wise it has not failed me. Transmission has never grinded or popped out of gear. Car pulls well through every gear. The clutch is starting to slip but I am including a F1 Spec Stage 1 clutch, OEM pilot bearing and OEM throwout bearing. I am asking $7,000. No trades. I am located in Lake Forest. My telephone number is 949 231 7252 feel free to call, text or email. Exterior: Autokonexion FG NC/NA Adore Front Bumper Autokonexion FG Blister 30mm Fenders Autokonexion GT Side Skirts Autokonexion GT Rear Quarter Panels Autokonexion V1 FG Front flares Autokonexion V1 FG Trunk APR GT GT Side mirrors Slick Auto APR Sidemirror Miata mounts Miata Turn Signal Induction Kit Go Miata Low Profile Headlights Antenna plug Frankenstein Bolts OEM Hardtop w/ headliner and defroster Hardtop Spoiler New Top of door weather stripping Altezza tailights that I tinted using niteshades Hexis Variochrome Pearl White Vinyl, i have 5ft x about 10ft left over. Under the vinyl the color is Rustoleum battleship gray. Interior: Porsche GT3 Replica Seats on no name mounts. Hard Dog M1 Roll bar Miata Boss Frog Seat Belt Adapters Black Door panels (with arm rests) Black Dash Black Seat belts New OEM black shift boot New interior top of door rubber stripping New black carpeting Momo Prototipo Steering Wheel Daikei Hub Adaptor Black Textured Voodoo Shift Knob Injoy Visor blanking plates Injoy Radio Delete Auxiliary Connector in center arm rest Sony Amplifier (in the trunk) Focal Coaxial speakers in the doors Engine Engine has about 70k miles on the rebuild from PO. I did some extensive work on refreshing the motor in the past 2000 miles. Parts that were replaced: Valve cover gasket Cam shaft seals Crank shaft seals CPK seal Waterpump + gaskets Thermostat + gasket Timing belt Accessory belts Tensioners Literally everything you can. I also have new F1 spec stage 1 clutch, OEM Pilot , throwout bearing and rear main seal. Not installed. The car leaks a little from the rear main seal. Suspension/Wheels/Brakes Megan EZ-Streets New inner and outer tierods and new boots. Work CR01 15x9 -3 15x8.5 +3 Hankook 225/45 RS3's - 1k or less miles on them Wilwood LBBK 4 Piston Front calipers Current Pictures: [img]http://farm9.staticflickr.com/8365/8467460728_8d4b85772e_b.jpg[/img] [img]http://i.imgur.com/ewHDbNr.jpg[/img] [img]http://i.imgur.com/cfdNs.jpg[/img] [img]http://i.imgur.com/RebZ0.jpg[/img] [img]http://i.imgur.com/zawo0.jpg[/img] [img]http://i.imgur.com/wKWZQ.jpg[/img] [img]http://i.imgur.com/tPT9G.jpg[/img] Pictures during the vinyl'ing [img]http://i.imgur.com/8d0Q3T8.jpg[/img] [img]http://i.imgur.com/3gHFzQA.jpg[/img] [img]http://i.imgur.com/hHBsQlY.jpg[/img] [img]http://i.imgur.com/2tMn1xa.jpg[/img] [img]http://i.imgur.com/NEuVP6y.jpg[/img] What color it is under the vinyl [img]http://i.imgur.com/OPcd5.jpg[/img]