Suspension Shop in the area?

Im looking to get some serious camber up front and in the rear so the wheels sit flush with the fenders when its slammed.  Any suggestions onto where I can take it on the coast?  Ive asked atleast 5 people and they all agreed that it would be a custom job since there are no bolt on kits.  Thanks

where u located?

Queens NY

yo im curious too

For the front I believe there are no OEM adjustments, however if you might be able to find some camber plates for Y33. I highly doubt you'll find it as they are sold with full coilover setups. Maybe you can contact JIC and see if they would sell just the front camber plates. For the rear you can use S14 RUCAS (rear upper control arms) to adjust your camber, but it would be wise to also get S13 toe arms and add additional washer to the Heim joint insert ends, as it's not as wide as the OEM toe rod end. You may be able to find these parts on Ebay. I have S14 RUCAS and the S13 toe arms on mine and it great. I am running -3 degrees of camber and 0.1 degrees of toe on the rear. I didn't do anything for the front camber as it is on -1.5 degrees (not too bad). Just a thought I was pondering for front camber, maybe S13 or S14 camber plates MIGHT work, but I have not found any confirmation if it does or doesn't fit. Negative camber is not too bad if your toe settings are good, negative toe settings will definately eat your tires up.

[QUOTE]For the front I believe there are no OEM adjustments, however if you might be able to find some camber plates for Y33.[/QUOTE]

I guess I forgot to mention I had a F50 and its harder to get this thing to camber.

Differnt question but it belongs in the same thread.  Where can I get my airbag suspension put in on the east?  Speed world on queens Blvd wants too much.

we can do it for you man. we bag a car or 2 a week haha. PM me if you want prices, im about 2 and a half outside the city so its not a bad drive at all. we get alot of people from down there that drive up for work.

[QUOTE=jubei07;50548] maybe S13 or S14 camber plates MIGHT work, but I have not found any confirmation if it does or doesn't fit. [/QUOTE]

I can check on this.. I have some JIC camber plates for a y33 laying around and i also have a s13 with no suspension on it hanging around... I'll let you know.

s13/s14 camber plates will NOT fit a Y33, I've tried