A32 Cefiro- Wheel Fittment help

A32 Cefiro- Wheel Fittment help...Introduction also.
I have a 1996 I30t (until I find a y33)  Just ordered JIC MAGIC- FLT-A2 VIP Luxury Vehicle Coilovers Cool - (suteki) 

I want a very agressive fitment, tuck if possible. I definitely will roll and pull fenders. Has anyone had experience with this vehicle or its twin 95-99 maxima. I know this is not a VIP platform. I am working with what I already have, and I will soon upgrade to a VIP platform. Any help is greatly appreciated.
Thanks Ron

[QUOTE=NEVERLATE;48920]A32 Cefiro- Wheel Fittment help...Introduction also.
I have a 1996 I30t (until I find a y33)  Just ordered JIC MAGIC- FLT-A2 VIP Luxury Vehicle Coilovers Cool - (suteki) 

I want a very agressive fitment, tuck if possible. I definitely will roll and pull fenders. Has anyone had experience with this vehicle or its twin 95-99 maxima. I know this is not a VIP platform. I am working with what I already have, and I will soon upgrade to a VIP platform. Any help is greatly appreciated.
Thanks Ron[/QUOTE]
I'll ask Will, you might have seen his burgundy one from here in Hawaii..he did the front/rear conversion too.

My brother has a 98 Maxima on G35c wheels. 19x8 +30F, 19x8.5 +33R. He has 5mm spacers all the way around and its absolutely perfect IMO.

Okay, here's the breakdown.  I spoke with Will and he told me this:

you can't go lower than + 25-27 on the front
you will rub the inside of your frame
The back is pretty lenient
But still not as great as a rwd
I think you can run low disk around 20-22
Whatever I'm running is almost max on stock fenders
I'm rolled... but not pulled
The problem is not rubbing on the outside
But the inside frame

Thanks for the great help! 
I have not seen Will's ride do you have any pics of it or know where I can see a pic? Or any i30 with good fitment for that matter.
 I never thought rubbing frame would be the problem. I knew somebody here could save me alot of headache. 
Thanks- (arigatou) Thanks again!

Testing out some other wheels.  He drops it much lower for shows and what not.

[img]http://i109.photobucket.com/albums/n73/rev-01/Picture644.jpg[/img]
[img]http://i109.photobucket.com/albums/n73/rev-01/Picture645.jpg[/img]

thats a pretty sweet i30.  i have 18x8 with 32offset with about a 1 finger gap all around.  i get rubbing up front all the time.

My friend's Cefiro A32 with 19" x 8.5JJ (Offset F38/R31)Conneiseur wheels with 8mm spacers both front and rear...

[img]http://img.photobucket.com/albums/v618/sonictheory/VIPstyle%20Society%20Malaysia%20TT/DSC_0162a.jpg[/img]
[img]http://img.photobucket.com/albums/v618/sonictheory/VIPstyle%20Society%20Malaysia%20TT/DSC_0165a.jpg[/img]
[img]http://i140.photobucket.com/albums/r40/vipstylesociety/gallery/DSC_0680.jpg[/img]
[img]http://img.photobucket.com/albums/v618/sonictheory/VIPstyle%20Society%20Malaysia%20TT/15th%20OCT%202006/DSC00414.jpg[/img]
[img]http://i101.photobucket.com/albums/m47/Paulsonckk/11111.jpg[/img]
[img]http://i101.photobucket.com/albums/m47/Paulsonckk/16082006745-1.jpg[/img]

BTW, the wheels for sale at here...
[url]http://www.zerotohundred.com/newforums/chassis-and-wheels/146271-advan-connoissuer-19-x-8-5jj.html#post2100321[/url]

Cheers!

thanks for the pics! Kaiser do you know what kit he is running?

[QUOTE=NEVERLATE;49060]thanks for the pics! Kaiser do you know what kit he is running?[/QUOTE]
Almost looks like a Diana copy, but not quite.

[img]http://www.online-carshop.com/shop/image/%23%23%23/diana_a32cefiro_fb.jpg[/img]

[img]http://www.online-carshop.com/shop/image/%23%23%23/diana_a32cefiro_rb.jpg[/img]

I'm not sure, but I think it's JP... I think?

[QUOTE=kaizer;49575]I'm not sure, but I think it's JP... I think?[/QUOTE]
By JP, I hope you're not saying Junction Produce...they never made anything for the Cefiro.

if not mistaken, he go for customade.. ;)

Custom according to JP? ;)

i think so, get inspired by JP?... as he's more into JP style